Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

We recently moved from Colorado and we went to do a load of laundry today. It hooked up fine and ran fine until the spin cycle. When it hit the spin cycle it started knocking terrible and making a loud bangng when it was going around. It ran fine until we moved. How do I fix it and what do I need to try before buying pArts or calling a repair man!? Were in the military and don't have a lot of money so cheap ways help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,305 Answers

Before spending money on repairs and service calls, check to make sure the unit is level front to back and level side to side. Then check the adjustable feet on the machine. If the machine can be rocked, then turn the legs until all 4 feet are in solid contact with the floor while maintaining level.
Then retry a load.
Hope it gets you back up and running smooth!

Posted on Jun 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher paykel mw511


take it apart-something has let go in the tub suspension department-springs or bearing-tear it down and it will become apparent-cheers Denny

Oct 28, 2013 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Drum is banging on wash cycle.


Hi

I am not too familiar with KitchenAid products as we dont have them in Australia. However most front load washing machines have the same basic set up.

Open the top hatch and also the back panel. Check the suspension springs on top of the drum and also the shock absorbers underneath the drum.

Make sure they are ok and non has come off or broken during the move.

Also make sure that the counter balance bricks or blocks are not brocken or loose.

Good luck.
Ash

Oct 31, 2009 | KitchenAid KHWS01PMT Front Load Washer

2 Answers

Kenmore 80 Series - machine won't rinse or spin


Manually move the timer to the SPIN mode and turn it on.
If nothing happens, replace the lid switch.
With a model number I could be more specific.

Feb 27, 2009 | Kenmore 24032\24036 Top Load Washer

2 Answers

Clothes still wet at end of spin cycle


i would check your belt.the added stress of a full tub longer with water may have done it in.part#wh1x2026 God bless,tom

Jan 10, 2009 | GE WBSR3140DW Top Load Washer

1 Answer

Runs great stuck on rinse cycle


Peace,
ngafm to your rescue,

Yes it is in the dial and mechanism of the timer!

Things wear out! So is life!



Only a trained laundry tech can make the electronic diagnoses.


How old is the washer?Sounds old!

If the appliance is 10 years old or more you it may not be advisable to put good money into bad!
New appliances are so much more efficient today that they can save you a lot of money in energy!!!!
Water,Electric and detergent! And put money back in your pocket!
The new appliance will pay for itself in only a few years!

You will be fine
Bless You ngafm
PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OFF


Sep 06, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Frigidaire LTF2940ES Hums


sounds like something is stuck in drain pump

washer will not go into high spin untill water is pumped out

Jul 20, 2008 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Wash cycle will not start


you may have leaned on lid and damaged the lid switch , so the washer thinks the lid is open all the time unit will fill then stop with lid up.

Apr 13, 2008 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Loud banging during spin cycle


please balance your washer and use smaller loads

Mar 18, 2008 | Kenmore 43052 Front Load Washer

1 Answer

Mildew/Stagnant water smell in washer


you know, this does happen.

run it on a full cycle, warm, with either of these in solution.

baking soda, at 1/10 concentration

non chlorine bleach, at 1/6 concentration

you most likely need to do this more than once, until your nose is happy.

Also, consider doing this at least once every 200 wash cycles.

essential oils have same effect, and do a nice anti microbial as well.

we did this in commercial laundries all the time, as part of standard health code compliance issues.

Feb 18, 2008 | Maytag Neptune MLE2000A Front Load Stacked...

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2183 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...