Question about HP Laserjet M2727nf Multifunction Printer

1 Answer

M2727 will not initialize. - HP Laserjet M2727nf Multifunction Printer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 123 Answers

You have to be a little bit more specific next time, we have 2 possible scenarios:
A) The printer freezes at the HP LOGO
B) Blank display / No display
Both are usualy caused by a problem in the formatter (Mainboard) . There is nothing you can do to recover it. If the printer is still under warranty you will need to call HP (1 800 334 51 44) or take the printer to an athorized warranty depot in your area. This link will help.
http://h20465.www2.hp.com/GPL/search.aspx?language_code=en&country_code=us&SearchType=SSP
I can tell for sure that the warranty for this specific model M2727 will be extended 1 extra year (means you have 2 years coverage) if the printer has one of the issues listed above I Hope this can help You can contact me directly on : eliteprintersolutions@hp.com

Posted on Jul 14, 2010

  • bernard_s_cr Jun 18, 2014

    I have this same problem also and I solve the problem by removing the mainboard (formatter board) and use a 100 watts bulb to reheat the two surface mount IC for about 10 minutes

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

52 Scanner error m2727 how to solv


The product has experienced an internal hardware error.
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize.
If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.
If the error persists, contact HP.

Nov 03, 2016 | Office Equipment & Supplies

Tip

What is a Scanner Error 5 Hewlett Packard M2727nf MFP


prefab_0.jpg



"Scanner Error 5 or Error 8"

Hewlett Packard Laserjet M2727

The Copier Scanner is failing to initialize or find home position. The printer will have to have the Scanner replaced by an Authorized Hewlett Packard repair facility. The printer may at times "freeze" or "hang".

This printer is under HP Warranty until Mar 23, 2011

Contact Hewlett Packard for Warranty repair. See Link Below

http://welcome.hp.com/country/ca/en/contact/phone_assist.html

2 parts need to be replaced at the same time

Parts Required as follows

Formatter - CC370-60001

Scanner/Flatbed - CB532-67905

Warranty Extension Expiration 2011-03-23

on Feb 04, 2011 | HEWLETT-PACKARD Hewlett Packard 53A...

Tip

What is a Scanner Error 5 Hewlett Packard M1522nf



prefab.jpg
"Scanner Error 5 or Error 8"

Hewlett Packard Laserjet M1522

The Copier Scanner is failing to initialize or find home position. The printer will have to have the Scanner replaced by an Authorized Hewlett Packard repair facility. The printer may at times "freeze" or "hang".


Contact Hewlett Packard for possible Warranty repair. See Link Below

http://welcome.hp.com/country/ca/en/contact/phone_assist.html


Parts Required as follows:

Formatter CC396-60001 M1522N Printer
Formatter CC368-60001 M1522NF Printer
Scanner/Flatbed CB534-67903


on Feb 04, 2011 | HEWLETT-PACKARD Hewlett Packard 53A...

1 Answer

Hp laserjet m2727nf initialing


If you mean that the unit does not complete initialization then it means that the formatter is likely junk. The good news is this:

Any HP M2727 manufactured before January 1, 2010 is covered by a service advisory that will get the printer repaired at no charge. You need to contact HP and get a case number or contact an authorized HP service partner. Be insistent, I have seen some service partners who have no idea that this service advisory exists.

Feb 17, 2011 | HP Laserjet M2727nf Multifunction Printer

1 Answer

I cannot print or copy with my HP LASERJET MFP M2727 NFS because the control panne show this error: SCANNER INITIALIZING ERROR 5. The only thing that is suggested is to turn on the device. When I turn on...


Hello,


This sounds like a Scanner/Flatbed Problem. This series of printers have a known problem with this component. The scanner is failing to initialize itself. The scanner does need to be changed by an Authorized HP Warranty Repair Facility. It is possible that it may be covered under an HP Extended Warranty program. See repair information VIA posted Link.


M2727INFORMATION


Cheers!!

Jan 27, 2011 | HP Laserjet M2727nf Multifunction Printer

1 Answer

Hp M2727 goes into low power sleep mode and can only recover by cycling power


You may need to have your printer's firmware updated by a certified technician.

Jun 08, 2010 | HP Laserjet M2727nf Multifunction Printer

2 Answers

Hp m2727 nf Scanner Error 5


Everything I'm reading online at HP says that either will be fixed when you re-initialize or you have to send the Printer/Scanner into HP for repair. The customer service says to call the Support line: 1-800-474-6836 to help with re-initialization.

From what I can see this is a common problem and even happens frequently on brand new machines.

If you are adept at repairing a printer. here is a link to a forum where a number of people talk about what they've done.
http://forums11.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=1114797&prodTypeId=18972&prodSeriesId=3377075

Oct 04, 2009 | HP Office Equipment & Supplies

1 Answer

M2727 MFP no lights on the display


probably a cable is loose or not connected for display. printer could be faulty or you mught fix easily.

Aug 20, 2009 | HP M2727NF Laserjet Printer

1 Answer

HP PCL5c paper source options for HP M2727


you will find it here

http://www-01.ibm.com/support/docview.wss?uid=nas1ba0863cfa6463903862569c10078c903

HP LaserJet M2727 MFP Series
HP LaserJet M2727nf MFP HP PCL5/PCL6 N hppcl5.pdt
HPLJ4.PDT *RICOHAP3200
*HP5SI
*HP4000 Y Y Y ? PostScript 3 emulation N n/a n/a

Jun 16, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
HP Laserjet M2727nf Multifunction Printer Logo

1,347 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...