Question about Microsoft Xbox 360 Halo 3 Special Edition Console

1 Answer

A red light came on when i pressed the start button

Will not come on now

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 161 Answers

DO NOT OPEN YOUR XBOX 360 CONSOLE!
Microsoft will fix it for free with free shipping. Takes about 2 weeks.
There is video and different ways to fix it online but it will happen again with those half baked solutions. Sometimes 1 week sometimes 6 months but it always happens again. Also, Microsoft adds another year to your warranty and a card to a free month to xbox live.

http://support.xbox.com/support/en/us/nxe/LiveIDSignIn.aspx?redirectUrl=http://support.xbox.com/support/en/us/nxe/registerdevice.aspx?step=repair

Posted on Jun 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I want to change current keypad code linear LD050 model


To change the keypad code.

Step 1:
Erase the current code - On the upper right hand corner of the left hand side of the unit, you will see a "learn" button.

Press and hold the "learn" button for 12 seconds.

When you release the learn button, the red light above the button will blink 3 times and then come on bright for 15 seconds.

When the light goes out, the memory in the operator is erased.

Step 2:
Learn a new keypad code.

Press and release the "learn" button.

The red light will come on. You now have 15 seconds to complete the next task.

Go to your keypad and enter your desired code (1 to 6 digits long)

press start/stop on the keypad.

The red light will blink when the code is successfully stored.

Don't forget to re-enter all of your hand held remotes into the memory:

Press and release the learn button. When the red light comes on, press the button on the remote you wish to update.

Repeat for other remotes. By the way, If you hold the learn button down for 10 seconds, you'll have to start over and the memory will be erased.

Nov 14, 2012 | Home Security

1 Answer

Maytag Washer Lid lock light


Its normal for the machine to cycle the lock before starting its cycle. I'm assuming your machine is a bravos style.

May 30, 2012 | Maytag Washing Machines

3 Answers

Hitachi ACE follow me red filter light is always on


the red light turns on automatically after 120 hrs of running to remind us for cleaning the filters. once you cleaned the filters and inserted back , then just keep ac in stand by mode, open the remote panel and press the button on extreme right bottom of the remote ( see carefully in the remote, there is very light image of the filter is made along with the button). red light will go off. no need to press the reset button.... enjoy

Apr 03, 2012 | Hitachi Heating & Cooling

1 Answer

After pressing the red sync button on the console for about 10-15 seconds, and syncronizing the remote, the remote stars to work, but when I start a game the remote is no longer working. Then when I...


There are two ways to sync the Wii remote with the Wii console after pressing the red sync button like you did:

1) Press the "1" and "2" buttons on the Wii remote until the lights begin to flash. This method provides a temporary connection to the Wii.
2) Open the battery cover on the Wii remote and press the red button next to the batteries. This creates a permanent connection or "pair" between the Wii remote and the Wii console.
Based on your description, it sounds like you are using method #1. In order to power on the Wii when the Wii's red light is on (meaning the machine is turned off) and start playing games like you want, method #2 must be used.
Imagine method #1 as "guest mode". If a friend comes over with their Wii remote and wants to play a game, you would open up the game first, use method #1, and your friend would temporarily be connected to the Wii. Using method #1 is like "owner mode" that lets the Wii remote turn the console on and off and always stay connected to it.
Hope this helps!

Mar 10, 2011 | Nintendo Wii Console

1 Answer

What is the pairing security code for xx3 plantronics


The following are detail instructions on how to Pair (sync) a Plantronics Bluetooth Headset to your Bluetooth Cell Phone:

1 - You need to go into the device you wish to pair it and turn the Bluetooth feature first.

2 - Then you need to place the headset in pairing mode so your phone will find it.

Find your model headset in the instructions below. Once the headset is in "Pairing" mode you will then need to follow the instructions in your cell phone or Bluetooth device's user guide on how to go it to your phone and search for the headset & pair it to a Bluetooth headset.

The passkey is 0000 (4 Zeros) except models M1000 and M1500 (see below for their number )

For the Plantronics M3000/M3500 (discontinued):

Pressing and holding down the volume up key and the talk button at the same time. Hold them in together until the indicator light on the headset starts flashing red then green.

For the Plantronics 510 Voyager:

510_small.jpg

Pressing and holding down the call control button and holding down the volume up at the same time until the indicator light on the headset starts flashing red then blue.

320_128.jpgexpl330_128_blue_pop.jpg340_small.jpg

Plantronics Explorer 320,330,340 & 350

Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.

dis655_128_blue_pop.jpg 665_small.jpg

Plantronics 655, 665

Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.



discovery645_small.jpg

Plantronics Discovery 640, 645, 640e

Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.

plantronics-590a_small.jpg

Plantronics Pulsar 590/590e & 590A & a Bluetooth device:

Begin with the headset turned off. Press and hold the call control button then power the headset on and when the indicator light flashes red and blue, release the call control button. Once the headset is paired successfully the headset will flash blue.

pulsaradapter.jpgFor the Plantronics Pulsar 590 & 590A & the Universal Adapter: Begin with the headset turned off. Press and hold the call control button. Power the headset on and when the indicator light flashes red and blue, release the call control button. Turn the Universal Adapter on. Press and hold the adapter pairing/connect button for 7-10 seconds. When adapter starts flashing red and blue release the buttons. The headset and adapter will flash blue when paired successfully.

pulsar_260_128.jpgPlantronics Pulsar 260

For the Plantronics Pulsar 260, Begin with pendant powered on.

Press and hold both the mute/play/pause button and the power on/off/pairing button simultaneously. When the
indicator light flashes red and blue, release buttons. While pendant is flashing red and blue, use the phone menu to search for Bluetooth devices and select "260 Plantronics." When prompted for passkey,
enter 0000.

m2500.gif
For the Plantronics M2500 (discontinued):

Start with the headset powered on. Press and hold down the call control button while also rotating the multi function dial upward (away from the light) until the indicator light on the headset starts flashing red then green. When prompted for passkey, enter 0000.
m1000.jpg
For the Plantronics M1000 (discontinued):

Hit and hold the volume/mute switch in until the indication light starts blinking.

m1500.jpg
For the Plantronics M1500 & A500 adapter (discontinued): Turn the headset on and the adapter off. On the headset push in and hold the mute/volume dial until the indicator light begins to flash. On the adapter press and hold the blue power button for 10 seconds. The light on the adapter will flash once after 3 seconds- continue to hold the power button for another-7 seconds until the light flashes red. If the pairing is successful, the headset will sound a tone and both the headset and adapter lights will turn off.

For both the Plantronics M1000/M1500 (discontinued): If you remove the battery cover from the headset and then remove the battery itself. On the Green PC board itself there will be a letter followed by 4 numbers. These 4 numbers are your personal PIN code.

You can also use the Plantronics Bluetooth Pairing Guide

Feb 05, 2011 | Cell Phones

1 Answer

Will not power up. Green light on power source


Red battery light means battery is charging. It should start up even if battery is low. Try pressing on the area above and to the right of the power button, while you are pressing the actual power button.

May 13, 2010 | Acer Aspire 9500 Notebook

1 Answer

No power when tv turned on


Did it work before to start it with the channel button? If not then you should try pressing the red start button instead.

Jul 06, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Yellow Button problem


it is the reset
Press the start button (red). The charging
light will come on and charging will begin.
If the charging light does not come on,
press the reset button (yellow) first, then
the start button (red).
cohen_ss@hotmail.com

Apr 03, 2009 | Makita Drills

1 Answer

Tefal quick cup


Press the Hot and Cold button for 3 seconds,

The red indicator light will start to blink,

Release the hot and cold buttons and while the red is still blinking, press the and hold the hold water button, Once the desired amount of hot water is reached release the hot water button.

Now press and hold the hot and cold water buttons simultaneously for about 3 seconds.

The red light will stop blinking to the end of the programming.

NB the RED LIGHT WILL BLINK FOR THE DURATION OF THE PROGRAMMING.

Repeat the process for the cup quanity selector for the cold water.


------------------------------------The end -------------------------------------------

Feb 28, 2009 | Tefal Kitchen Appliances - Others

3 Answers

Red Light on front of Filter Queen Defender


When the red light is blinking, press and hold both up and down arrows until the red light blinks RAPIDLY, release both for a second or two, and press and hold both again until it stops blinking. It cured my problem.

Mar 06, 2007 | Filter Queen Defender Air Purifier

Not finding what you are looking for?
Microsoft Xbox 360 Halo 3 Special Edition Console Logo

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

marley mcelhinney

Level 3 Expert

490 Answers

Tre Elkins

Level 3 Expert

643 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...