Question about FUJIFILM FinePix J28 Digital Camera

1 Answer

Fujifilm j28, zoom error, camera will not operate

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Posted on Sep 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zoom Error


Take it to a repair chop.

Jun 21, 2017 | FUJIFILM FinePix J28 Digital Camera

1 Answer

Fuji j28 lens zoom error


Here are some troubleshooting steps that you can try that may (or may not) correct your problem. They only seem to work for less than 40% of the lens/zoom errors, but if the camera is out of warranty (or repair cost approaches that of the camera), they're worth that try. Some of the later steps do involve some risk to the camera, so carefully weigh your options before deciding to conduct them:
And here's a video summary of the steps:

Dec 16, 2011 | Fuji FinePix F47fd Digital Camera

1 Answer

Cant take pictures as CARD ERROR report comes up every time i turn it on


Possible that the SD card has errors or has corrupt files. It will be best to remove and insert on the card reader of your PC . Scan for virus or try to load into the memory. If there is issues the card must be changed, try with another card. If not the camera has errors in the slot or the card interface.

May 28, 2011 | FUJIFILM FinePix J28 Digital Camera

1 Answer

I want Date & time stamp on pictures


Hello and Welcome
To set the date and time stamp on pictures, Follow the given instructions:
  • Power on the FUJIFILM FinePix J28 digital camera and wait for the hardware to finish running through its start mode
  • Press the "Menu" button on the rear of the device, then choose "Setup."
  • Select "Options," followed by "Date." This brings up the date display. The display blinks as it has not yet been set.
  • Push the top button on the control display to advance the first number in the date. Once you have the correct number selected press "Enter" and repeat the process for all the numbers. When the date is set the time information appears. Follow the same procedure to set the time. Press "Enter" to accept the changes. Now every picture captured with the FUJIFILM FinePix J28 will save the date and time to the pictures
For further assistance, I am here to help.
Thanks and Keep Visiting FixYa

Apr 02, 2011 | FUJIFILM FinePix J28 Digital Camera

2 Answers

How do I fix the Zoom Error for Fuji Finepix F47fd? I can't even extend the lens fully like what previous posts stated


Hi Jasmine,

With fresh batteries inserted in your camera, try to do this little trick:

1. Hold the camera on your right hand with the lens facing the ground.

2. As you press the power on button, tap or hit the camera's base to your left palm. Do this several times.

Chances are, there could be a sand or granule of dust that got stuck on the sides of the lens, preventing it to retract properly.

Hope this helps.

Dec 13, 2009 | Fuji FinePix S304 Digital Camera

Not finding what you are looking for?
FUJIFILM FinePix J28 Digital Camera Logo

Related Topics:

692 people viewed this question

Ask a Question

Usually answered in minutes!

Top FUJIFILM Cameras Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Tony

Level 3 Expert

2600 Answers

Are you a FUJIFILM Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...