Question about Polaroid i1237 Digital Camera

1 Answer

It worked fine yesterday and now when i try to turn it on it will not power up, and it turned on one time and i turned it off thinking it was ok and now wont go back on

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 82 Answers

To thirst. control the batterie. if its good. why if the batterie is old its possible that have problems-
if you have new batterie ore 2 or 3 batterie prove with the other.
control that the camera when turned off...dont write on the schreen lens problem, or example the write on the schreen turn camera out and another one up. if the camera dont have received pressure or dropp,
if the camera says lens error this is a problem with the lenns bloc... but to first, prove with a new batterie and clean the internal contact of the camera with alcohol and one cotton fiocc. pull the batterie out clean the internal contact wayth that the alcohol are completly evaporated, and reprove. good luck

Posted on Jun 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse keeps blowing


Hi Anonymous, you have a hard/dead short that should be easy to find generally they are the easiest. Time to get out your test light and start tracking the wire from the power side of the switch, circuit breaker or the blown fuse receiver, when the test light quits lighting you are very close to your short. For a free wiring diagram please visit the website below and good luck.
Harley Davidson Wiring Diagrams and Schematics

Jul 02, 2013 | Harley Davidson XL 1200 C Sportster Custom...

2 Answers

I have a D-link DSL-2750U router worked fine till yesterday, but now its power led keeps on giving a red light it should give green a second or two later but it keeps givings


Reset router. There are two resets. A simple push reboots and holding it in clears all custom settings. Try the first.

This is a quick fix and usually does it. Test with network cable and work your way backwards to modem if you still have problems.

Nov 11, 2012 | Computers & Internet

2 Answers

My vacuum worked fine yesterday and now doesn't start


To my knowledge, the on/off switch is the only area to turn your vacuum on or off. There might be a problem with your cord, or with the switch itself. I suggest checking for clogs and anything that may cause a problem.

I also suggest taking it to a local vacuum shop to have it looked and as you may need some new parts (cord/switch)

Apr 13, 2010 | Eureka Whirlwind 4388 Bagless Upright...

1 Answer

Worked fine yesterday - will not turn on today - kitchen


When you say the machine is dead do you mean you are getting no LED lights at all or do you mean it is not booting up? No power and no post are two different things. With no power you get absolutely nothing at all. With no post you may have some LED lights but nothing comes up on the screen. You said power and power supply tested ok. How are you testing it? I need more info please.

Feb 07, 2010 | IBM ThinkPad T40 2373 Notebook

1 Answer

Lamp will not ignite


Two possible causes. First. The Color Wheel is going bad. Second. The Digital bd is going bad. Color Wheel part# is BP96-96-00674a and the Digital bd is a BP94-02065a.

Jul 09, 2009 | Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

Pioneer 53


Unplug the TV for maybe 10 minutes, then turn it on. Sometimes these units simply need to recycle. If that doesn't work, you've likely got serious problems.

Apr 11, 2017 | Pioneer SD-533HD5 53" Rear Projection HDTV

1 Answer

Photosmart/all-in-one


I am having the same problem. Mine randomly started printing alignment pages when I changed the ink. Then, yesterday it just didn't turn on. Ridiculous :/ Guess I just have to buy a new one if a lot of people are having the same problems.

Jan 19, 2008 | HP Photosmart C3180 All-In-One InkJet...

1 Answer

Washer won't turn on


try running an extension cord to another outlet (another circuit breaker). ensure the cord is not too long (25 feet ok) and able to carry 15 to 20 amps (use 12 AWG cord).

Sep 03, 2007 | Whirlpool Calypso GVW9959K Top Load Washer

Not finding what you are looking for?
Polaroid i1237 Digital Camera Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Cameras Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a Polaroid Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...