- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It sounds like your DVD is not getting any power to it. When you press the eject button does it show a power light for a second and then not move ? Also it is possible that some other DVD could have been in it and now it is blocking the door to open, look carefully at the door there should be a very small round hole on it you can use a paper clip straightened out to make a probe and insert it in the little hole and push you will have to push firmly and it should open the drawer. I hope this helps
It won't play for one of two reasons: 1. There is something inside the DVD player, which keeps it from playing. 2. The DVD player's battery has run out of juice and can no longer play, meaning the player needs to be replaced.
there is a switch connected to the dvd door you should see a pin hole in the casing, a pin on the door pushes this down to say the lid is closed they are common to brake off and then the dvd play does not know the door is shut. this video should help you locate the switch https://youtu.be/ucNedtR256g
the inter relay swich on the door is molfushing,or the open and close butten is bad'', try closeing the door and at the same time that the door close's unplug the power and then plug it back in after a few seconds and see what happens it my stay closed and then you can play it,, and it my stop doing that ''if not you will have to take it in to a repare shop'''' my names is ''james ''' let me know if this works for you''' you can e-mail ' me back at '' email@example.com .
It is called the slider assy. The slider moves the laser assy back to home or start position. It is a small belt underneath or there is gunk or hair in the gear mechanism. A very common problem with CD/DVD players/recorders. Very good though that you saw it was not comming back to home place. I wish I had a manual to assist you but I do not. Im telling you the most common problems with the slider mechanism. Good Lck