Question about Mitsubishi WS-65869 65" Rear Projection Television

1 Answer

Xbox 360 or Dish ViP 622

When I hook either my Xbox or Dish HD receiver up to the 1080i component video inputs, everything works fine if I set either device to 480p, but I get nothing if I set them to 1080i.

I'm pretty sure it's not a hookup problem because my old Dish 6000 works fine on 1080i with the same hookup. I also know it's not a device settings problem because both the Xbox and Dish ViP622 work fine on 1080i with my newer HD tv. Anyone have any idea what the problem is?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When i hook either my dish hd receiver up to the 1080i component video inputs, everything works fine if i set either device to 480p, but i get nothing i set them to 1080i.

Posted on Jan 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i hook my XBOX-360 up to this tv and get 1080i resolution? Thanks, Mike


You should be able to get 1080i with the Input/DVI port or the component video in ports of the TV. I believe the easiest option will be to set the XBox A/V switch to HDTV and use a component video cable (red, green, blue) from the XBox component out to the TV Component In. (with the audio out going to your TV or speaker system). Turn on the X-box and the My Xbox > System Settings. Then Console Settings > Display and chose the 1080i.

Set the TV Net Command (remote) and the Device settings for the input jack in use (component 1/2). Adjust the A/V menu for the Display before playing long.

Wen you change inputs, you will see a status screen for the settings for the TV input.

I hope this helps.

Cindy Wells

Sep 14, 2010 | Mitsubishi WS-48513 48" Rear Projection...

1 Answer

Xbox360 hd hookup problem---1080i


Your component cable is probably switched to the HD setting. You have to switch it back in order to get video when hooked up to a regular TV.

Jan 30, 2009 | Mitsubishi WS-55857 55" Rear Projection...

1 Answer

Plays dvds on xbox 360 fine, but no picture for games/dashboard


already solved it. thanks. i couldn't see the xbox settings blade because of the blank screen so switched my component cable to the tv setting instead of the hdtv setting, then i could see the dashboard in non-hd and switched the resolution to 720p while simultaneously switching the component cable back to the hdtv setting. that worked.

Jan 02, 2009 | Sharp Projection Televisions

1 Answer

RCA D52130 52 in. Won't Display High Def


Hi!
I doubt you'll look at this 2 years later, or even have the T.V.

I have the same TV and was able to view ps3 and xbox 360 games in 1080i, but it's a little tricky. First, let me say that the ps3 is probably not the best system to try using 1080i in unless you have a 360 to help trick the tv into working.

Xbox 360
You need to first set the video to 1080i. This will make the screen display in a bunch of horizontal lines most of the time, but if you keep toggling it on and off, it eventually works. To avoid having to sit and swap between the two modes, it's easier to first set it to 1080i and confirm the setting, then go back into the settings, select 720 (first option above 1080i) and cancel as soon as the video mode changes. 95% of the time this will make it display correctly in 1080i mode. If you turn the tv off and back on, it will sometimes reset to the horizontal lines. If you restart the xbox, it will reset to horizontal lines most of the time. With the ps3, you can set it to 1080i and keep toggling it until it works, but when the game launches it can screw up again, so it's best to have the xbox on and ready with a component switch so you can fix it with the xbox then switch back to the ps3. I think the cable that comes with the tv for HD input (the component plugs don't work, they only support 480, but the vga looking input supports 1080i) - the cable is just poor quality and can barely handle the signal. I've been trying to find a better quality cable with no luck.


Hope this helps other people with this ancient beta HD input canadian tvness.

Dec 30, 2008 | RCA D52130 52" Rear Projection Television

1 Answer

Philips 1080i xbox 360 hook up


you need to change the settings on the xbox aswell.

go to your settings menu and change the picture settings to 1080i

Oct 27, 2008 | Mitsubishi WS-55857 55" Rear Projection...

1 Answer

My xbox360 Wont work on my WS-55513 MITSUBISHI COMPONENT


Try changing the settings on the Xbox under display to 1080i. If it is 1080 p, or 720p, the image will look funny so make sure it is at 1080i.

Your welcome

Your friend from down the lane!

May 21, 2008 | Mitsubishi WS-55513 55" Rear Projection...

1 Answer

Hitachi 53SDX89BA HD settings


Problem more than likely with the xbox, as the output stream of data from the game platform is not always consistent...accordianman

Dec 29, 2007 | Hitachi 50UX57B 50" Rear Projection...

2 Answers

Can you connect to upconversion DVD Player for HDMI performance


The TV supports 1080i so if your hardware is plugged into the Component Cable Connection for Digital TV on the back the signal will come out 1080i as long as the hardware supports the size.

For example, my 360 is connected like this and when the dvd player is in use it upscales from the 480 format dvds use to 1080. More on the HD-DVD for the 360 and how it handles the sizes here:
http://www.engadgethd.com/2006/09/21/xbox-360-hd-dvd-playback-maximum-1080i-via-component-1080p-vga/

Kind of an old article since the newer 360s have hdmi and support 1080p that route.

Hopefully this helps.

Dec 16, 2007 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

TV projects a pink/green shadow


Logically proceed one source at a time = disconnect all,
then hook-up one at a time or hook-up seperately.FYI, the
RF coax , composite and s-video inputs all share the same
circuitry, whereas component is a whole seperate video
processing circuit, with another difference between 480P and
1080 I . Sounds like you have a 1080 I problem, which might
be a little sister board..............................T.

Let me know..............Thanks.

Oct 07, 2007 | Akai PT5598HD 55" Rear Projection...

1 Answer

Video input 4


If you changed PIP then you reversed your tuner, you need to flip back and is input 4 HD on this set? Or S-Video or just another component video? What is wrong with 3-1?

Sep 21, 2007 | Hitachi 61UWX10B 61" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-65869 65" Rear Projection Television Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...