Question about 2wire (1000-400108-001) Router

1 Answer

HOW CAN I SET UP A HARD WIRED WG602V4 ACEESS POINT AS A REPEATER AND A SECOND WG602V4 AS A WIRELESS REPEATER WITH A 2WIRE 2701HG-B DSL MODEM/ROUTER. DO THE AP2 AND AP3 REPEATERS BOTH HAVE TO WIRED TO THE LAN OR BOTH BE WIRELESS? THAT IS CAN YOU HAVE ONE WIRELESS POINT TO POINT BRIDGING REPEATER AND ONE REPEATER WITH WIRELESS CLIENT ASSOCIATION?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,281 Answers

Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.0.1
or
http://192.168.1.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on WAN settings and set those settings as your internet service provider settings.
Enable DHCP if you want to get ip from router.
Click on wireless settings then set as access point as AP (access point)
enable wireless then enable WEP Security then add WEP code .It is your password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.
In another router set as Repeater mode or bridge mode point to point or point to multi point.
Then save settings and restart both AP.
Let me know if you need further assistance.
Thanks for using FixYa.

Posted on Jun 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an at&t 2wire 2701hg-b but i dont have at&t internet i have charter and i am not able to figure out how to get my internet to work with this router please help


att 2 wire is a Adsl Modem (Requires a telephone line jack to get the signals) but charter communication is a cable internet service (not DSL) , Requires a TV cable service for internet .
These two jacks differs and there working differs ..
Means : Att works with the username and password type of authentication but charter requires the MAC address of modem for authentication .
Therefore for a cable internet 2wire 2701hg-b modem cant be used . But yes in case charters has username and password authentication and works with the telephone jack in house then its possible to use the same modem.

Aug 19, 2011 | 2wire (2701HG-B) Wireless Router

1 Answer

How do i setup my 2 wire router with dsl modem to network iat home


Try this links:
2wire installation guide: http://support.2wire.com/?page=view&article=765
changing wireless settings: http://support.2wire.com/?page=view&article=60
wireless configuration guide for windows XP: http://support.2wire.com/?page=view&article=224
wireless quick reference guide: http://support.2wire.com/?page=view&article=47
note: 2wire is already a wireless router / modem need for other modem to have a good network at home
AT&T ' Yahoo! High speed Internet
Call +1 877 722 3755 (877-SBC-DSL5)

Aug 12, 2011 | 2wire (2701HG-B) Wireless Router

1 Answer

I want use my 2wire (2701HG-B) Wireless Router without the dsl line


Modem and routers are considered only as access point you computer may be able to connect to your router but if you dont have a DSL line you will not be able to go on line... if you dont want a DSL line there are service that concentrates on wireless alone... in this DSL line are not required nor router but may provide you a USB wireless adapter that has their wireless service then again try calling an Internet Service provider for this options...
thanks... Roger

Jun 11, 2011 | 2wire (2701HG-B) Wireless Router

1 Answer

I have a 2wire 397 modem router from att in line ,i want to add another 2wire modem router in line to a different room to hook up a samsung 3d blu ray to go on the internet


you cannot have 2 modem routers on the same line, if your current modem router has wifi, you might consider using a wifi repeater that will pick up the signal elsewhere and give you added lan ports. alternatively, you could just run a lan lead to where your samsung is and use a 5 port lan switch.

Apr 26, 2011 | 2wire (2701HG-B) Wireless Router

1 Answer

I have purchased an AT&T 2wire 2701HG-B wireless DSL router to use in setting up a wireless network in my office. I have an external modem now that is part my AT&T internet service. Will the new...


The network appliance you're asking about is a modem with a wireless router built in. Basically, it's an all-in-one device. It will replace your already existing modem. It is a wise upgrade for any AT&T DSL connection.

Mar 12, 2011 | 2wire 2700HG-B Router (2700HGB)

1 Answer

I have a 2701HG-B gateway furnished by AT&T DSL I want to change to wireless\r\nWill my gateway work with wireless? I will have to install wireless cards in my computers what do you recommend? My...


You need a wireless router for you to use Wireless connection

I recommend DLINK, Belkin or Linksys router any of those will work.

you can still use wired connection because router has 4 ports for wired connection but if you prefer to use wireless then you need to buy USB wireless network adapter.

Sep 06, 2010 | 2wire (2701HG-B) Wireless Router

1 Answer

Linksys WRE54G


after hooking the linksys router to the modem hit the reset button on modem. this will allow it to set it up in dhcp and recognize its mac address.

Dec 16, 2009 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Is the Linksys WRE54G Repeater compatible with the AT&T 2701HG-B


Hi Friend

Its been really unfortunate that the money you have spent is wasted. The main disadvantage of linksys repeater is that these devices are compatible only with linksys routers. There is a seldom chance that these can be compatible with other vendor routers.

Regards
Chiranjeet

Dec 16, 2009 | 2wire 2700HG-B Router (2700HGB)

2 Answers

Can I use AT&T 2WIRE 2701HG-B DSL to ant ISP?


look if u wish to go for verizon service,,they will provide u with a wireless modem as well,,but if u tell them that u hav a modem then they might configure this modem only,,both ATT and verizon are DSL service providers with PPPoE connections.the only thing u need is the username and passwrd from verizon which u have to setup on the first page of the 2wire setup page,,both the connections are dhcp based.so no other connection settings change required.But when u talk with verizon make sure u tell them of the 2wire modem

Moreover verizon has wireless broadband service which is actually a express card tat u have to put into your computer and u can go online anywhere u go within ur country{it works like a mobile phone}

best of luck,,keep me posted

May 14, 2009 | 2wire Wireless-G 802.11g ADSL Gateway

Not finding what you are looking for?
2wire (1000-400108-001) Router Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Bruce Silvernagle
Bruce Silvernagle

Level 1 Expert

17 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...