Dryer seems to be working fine but I have no heat. Any ideas?

check vote to motor u good have short to ground an check element

Check all the thermostats for continuity.

First look for reasons why safety components would trip and remedy them thangs
So once we have that ironed out we now have an idea where to look first. If the dryer is clean and the vent is clear and you still have no heat then one of your heating components have failed. The heating components are the element, coils, sensors, ignitors and controls.

So if the element is bad simply replace it and you now have heat but what if the element is ok?
If your ignitor and flame detector is fine you may have the very common problem of weak coils
If it turns out thet your safetys are fine and your heating components are fine then you could have a bad control
If your control is fine you could have a bad circuit breaker.The motor on American machines is 120 volt of alternating current but the 5000 watt heating element requires 240 volts.

I have include a dozen or so Dryer service manuals and more HERE


Let Me Know.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

its more likely to be thermo stat if you take off the lid you will see the dryer unit on top of that there are 2 little round objects with 2 wires on each they are held in with little metal springs if you buy a thermostat kit they are easy to change

Hello & Welcome to FixYa

As everything in your dryer is working fine apart from it heating properly so the recommended repair will be thermal fuse/thermostat replacement. However, you can also test its continuity before replacement. Please get back to me if you have any other questions.

Kevin

I have a Thin Twin manual that will give you an idea of where to start:

THIN TWIN SERVICE MANUAL


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hi, If you have a gas dryer.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer not Working Gas Dryer Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer is electric..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer Troubleshooting Electric Dryer won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

check your ignitor

Looks like the gas valve coils are failing. This usually begins to happen later in the cycle as the dryer has run for awhile. You will have to have the coils replaced.

http://tclaundryrepair.com/