Question about Canon PC-1060 Black and White Copier

2 Answers

Auto feed starts but stops before it feeds the paper. How do fix this problem. How do I take the Auto Feed apart to find the problem. The rollers start then shut off before the paper start to go into the feeder.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 30 Answers

Be sure to check the white separation pad under the second roller - a known wear item. If that is OK, you probably have a sensor switch problem

Posted on Jun 11, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 149 Answers

I am not sure how to get to the feed and seperation rollers/pads in this doc feeder. But if you can access them even a small amount you might try using alcohol solution to clean them up and or a green scott bright scartching pad to ruff the surface up a bit to give them grip and to help clean them off some. might even use a little simple green on the pad to help clean them off thena paper town to dry the rest off. this could buy you some time till you can get a new set of rollers to have put into it

Posted on Jun 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The paper isnt going through


If the paper feed rollers are not clean, they may slip and cause paper feeding problems.
The problem may be alleviated by performing paper feed roller cleaning.

1. Open the Printers folder.
- For Windows XP Home Edition Click/Select "Start," "Control Panel," "Printers and Other Hardware," and "Printers and Faxes."
- For Windows XP Professional Edition Click "Start" and "Printers and Faxes."
- For Windows 2000/Me/98 Click/Select "Start," and "Settings," then "Printers."
2. Right-click the icon of the printer for paper feed roller cleaning, and select Properties from the displayed list.
3. Click the Maintenance tab and click Roller Cleaning. 4. Remove all sheets of paper from the auto sheet feeder, and click OK. 5. Confirm the message to be displayed, and click OK.
Do not try other operations until printer's operation completes.
6. When the printer's operation is completed, follow the confirmation message to load three new sheets of A4 or letter-sized plain paper in the auto sheet feeder
7. Click OK.
8. Confirm the message to be displayed, and click OK.
Do not try other operations until all the three sheets are ejected.
Memo: The printer prints nothing on those sheets.
9. When all the three sheets of the paper are ejected, paper feed roller cleaning is completed.
10. Click OK.
Performing Roller Cleaning is completed.

Nov 09, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

HP G85 / Auto feed


You need first to take the printer apart and clean the rollers and make sure no foregn object is causing the problem and after that after cleaning and still have problem reller replacement maybe needed....

Oct 30, 2008 | HP OfficeJet G85 All-In-One InkJet Printer

1 Answer

Cannon imageclass d660 auto feed stopping 3/4 way through


There are some small plastic pieces in this feed that can do this. This is an older machine, the whole top feeder can be replaced for $150.00 Its $100.00 dealer cost. And they will want an hours labor.

If that doesnt sound good I would buy a new machine.

Dec 23, 2008 | Office Equipment & Supplies

1 Answer

Hi I have a Canon PIXMA MP950 printer , purchased on Dec. 6/05. Yesterday I had paper jams inside the machine. It fed the paper from the cassette, but got stopped on rollers in rear cover area. I can...


It is fixed, I think. My husband worked on it today and had a look inside the printer with a flashlight. He found a plastic tack had dropped in the rear of the printer, down in the rollers! So he fished it out & we seem to be up & running!

Thank You! Joann Gabriel

Nov 12, 2008 | Office Equipment & Supplies

2 Answers

Not feeding


Have you still getting the problem, have you done cleaning of Cartridge, its nozzle and Contact strip.. then cleaning of Printer roller or carriage rack.. Do a Service of it or get it done by Technician.

Also check the feeder tray.. to grab paper one by one by printer.. Manually

Take all updates for printer and OS.




Oct 31, 2008 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

On a Canon MP 460 printer, the paper will not feed in straight causing constant paper jams.


If the paper feed roller is dirty, paper is not fed properly because the paper feed roller slips. Cleaning the paper feed roller could resolve the paper feeding problem. Please follow the instructions below to clean the Paper Feed Rollers directly from the unit.Caution: Since the cleaning process wears down the paper feed roller, perform this procedure only when necessary and no more than three (3) times.
  1. Ensure that the printer is powered on and remove any paper from the Auto Sheet Feeder (ASF).

  2. Press the <Menu> button.

    mp460_copymenu.gif

  3. Use the right / left cursor button to select [Maintenance/settings], then press <OK>.

    mp460_maintenancesettings.gif

  4. Use the right / left cursor button to select [Maintenance], then press <OK>.

  5. Perform the paper feed roller cleaning three times.
    1. Use the up / down cursor button to select [Roller cleaning], then press <OK>.

      mp450_rollercleaning.gif
    2. When prompted to start roller cleaning, use the up / down cursor button to select [Yes], then press <OK>. (The paper feed roller cleaning starts.)

  6. Check if the paper feed roller cleaning procedure resolved the issue.
    1. Load a sheet of letter-sized plain paper in the ASF and open the paper output tray.
    2. Use the up / down cursor button to select [Roller cleaning], then press <OK>.

      mp450_rollercleaning.gif
    3. Use the up / down cursor button to select [Yes], then press the OK button. (Paper will be fed.)

  7. If paper is not fed properly, repeat step 6 up to three times.

Oct 21, 2008 | Office Equipment & Supplies

1 Answer

Ep1083 copier


If the machine sees the ADF ( auto document feeder) but does not feed the paper? Does it try to feed the paper? Does it pull the paper is a little and jam? If the machine sees the ADF and it starts to feed the paper but jams --- clean the feed rollers/ tires with rubber restorer or a high alcohol base cleaner. Also a mylar could be pulled into the paper path blocking the feeding of the paper. Take a thin piece of cardboard ( like the devider in a case of pop) and slide the cardboard about 3- 6 inches into the feed just past the feed roller. Gently pull back out and try to feed paper again. If those do not work and the machine does see the ADF, you may need switch, sensor, actuator or feed motor.

Aug 27, 2008 | Minolta EP1083 CS/PRO Copier

2 Answers

Auto paper feed jamming


clean the rollers with alcohol. this will renew the rubber and clear up the problem

Jun 27, 2008 | Kyocera Mita KM-2530 Laser Printer

1 Answer

Canon PIXMA MP600 printer - paper feed


Issue: Paper feeds skewed
Solution: Clean The Paper Feed Rollers Using The Operation Panel - MP600

Clean The Paper Feed Rollers Using The Unit's Operation Panel If the paper feed roller is dirty, paper is not fed properly because the paper feed roller slips. Cleaning the paper feed roller could resolve the paper feeding problem. Please follow the instructions below to clean the Paper Feed Rollers directly from the unit. Caution: Since the cleaning process wears down the paper feed roller, perform this procedure only when necessary.
  1. Ensure that the machine is powered on and remove any paper from the auto sheet feeder or the cassette.

  2. Use the <Feed Switch> button to select the paper source where you do the paper feed roller cleaning. Click for here additional information.

  3. Press the <HOME> (A) button.

    mp600_home_scroll.jpg

  4. Use the Easy-Scroll Wheel (B) or press the right / left arrow to select [Settings], then press the <OK> button.

  5. Use the Easy-Scroll Wheel (B) or press the right / left arrow to select [Maintenance], then press <OK>.

  6. Use the Easy-Scroll Wheel (B) or press the up / down arrow to select [Roller cleaning], then press <OK>.

    mp600_rollercleaning.jpg

  7. Use the up / down cursor button to select [Yes], then press the <OK> button. (The paper feed roller cleaning starts.)

  8. To check if the rollers are clean, load a sheet of Letter-sized plain paper in the same paper source you selected in step 2.

  9. Use the Easy-Scroll Wheel (B) or press the up / down arrow to select [Roller cleaning], then press <OK>.

    mp600_rollercleaning.jpg

  10. Use the up / down cursor button to select [Yes], then press the <OK> button. (Paper will be fed.)

    Note: If paper is not fed properly, repeat steps 4 through 10 above up to three times.

Paper Source
Press the <Feed Switch> button to switch to toggle between the Automatic Sheet Feed (ASF) or Cassette. The light will come on when the <Feed Switch> is set for that paper source.
ASF
mp500_asf_led.gif
The above illustration shows a PIXMA MP500

Cassette

mp_500_cassette_feed_switch_led.jpg
The above illustration shows a PIXMA MP500

Note: When printing from the computer, if paper does not feed from the source you have selected on the operation panel, check Paper Source setting in the printer driver. If the option is not set to 'Paper Feed Switch', paper will feed from the source selected in the driver.
Click here to return to step 2

May 31, 2008 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Automatic Paper feed


Check the feeder roller inside the printer for any foreign substance stuck to the roller, this may cause it not to grip properly. You can also try a few sheets at a time and make sure the paper tray is gripping the paper, but not too hard. If this fails, the roller may be out of place somewhat, try to reposition it. Let me know how you get on.

Sep 06, 2007 | Samsung ML 1210 Laser Printer

Not finding what you are looking for?
Canon PC-1060 Black and White Copier Logo

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1986 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...