Question about Roadmaster (VR500CSBT)
SOURCE: no sound...
Let's try the easy ones first:
1. try to do a reset of the unit;
2. check that all the speaker wirings are:
2.1 connected properly following the wiring diagram;
2.2 not bare/exposed and touching any metal part/chassis;
3. verify that the MUTE is not enabled;
4. try all signal sources: AM/FM, CD, SD Card, USB, AUX;
5. verify that the SEL is set to SUB OFF;
6. replace the CR-2025 Lithium battery of the remote.
If your concern has not been corrected after completion of the above procedures, you may need to:
a. open the unit for a loose connection and/or other diagnosis;
b. ask assistance from the manufacturer's Technical Service at 1-800-445-1797;
c. return the unit for a replacement.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards.
Thank you for using FixYa.
Posted on Mar 03, 2008
I had the same problem and all I did was buy new wires the ones that came with the stereo itself burned up and seased to work. now I paid $6.00 for it at best buy. they look the same colored wires as the ones that came in it.
Posted on Sep 25, 2009
Tips for a great answer:
Aug 19, 2009 | Roadmaster (VR500CSBT)
Feb 01, 2009 | Roadmaster (VR500CSBT)
Jan 29, 2009 | 1994 Ford Crown Victoria
Dec 29, 2008 | Roadmaster (VR500CSBT)
Aug 21, 2008 | Audio Players & Recorders
Mar 02, 2008 | Virtual Reality VRCD500-SDU CD Player
Mar 28, 2011 | Roadmaster (VR500CSBT)
158 people viewed this question
Usually answered in minutes!