Question about Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

1 Answer

Won't empty When you put it on a wash example eco and 2 hr, it takes 4 hours and then doesn't empty, i have cleaned it and renewed the rinse aid and salt and it is still doing the same

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

How old is it if its more the 1 year buy a new one but if its not just get it fixed

Posted on Jun 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our dishes are not being cleaned well with residue left on plates and cutlery and the light next to the rise aid is on at the end of the wash


I have had the same problem a time or two. Make sure that you don't overload the dishwasher and nothing is blocking the spout where the water comes out. Also if you haven't done so already, you may want to add some detergent to the pre wash. Make sure you have enough detergent for the regular wash cycle also....Hottest water possible (at least 140 degrees F). If all that doesn't help, try cleaning them on heavy wash. Check to make sure the rinse aid level is still full. I have also found it easier if you rinse the dishes or cutlery off before putting them into the dishwasher.If none of the suggestions work I say changing your dishwashing detergent and/or rinse aid.Good Luck!

Sep 08, 2011 | Dishwashers

Tip

Frigidaire Dishwasher Error Codes and Service Test Mode


Many modern appliances have error code build in to the control programing to help with the diagnosis of a failure. Frigidaire dishwashers with display s will flash Er then a two letter error code.

Er i s a Switch error (Replace Console Pn# 154639207)

CE is a Configuration error (Replace Control Pn#154543602)

UO is a Vent that will not close. (Replace Vent Pn#154682301) or remove blockage

uF is a Vent fan Not running (Replace Vent Pn#154682301) or remove blockage

Other codes you my see in the display that are not errors

LO is Low rinse aid

PF is power failure

Ho is Water Heating

CL is close Door

01-24 hours of delay

Service Test

To enter service test you must turn off the power and PF will be displayed. While in PF press and hold Pad # 1 and Pad # 7 at which time an “rt” will appear in the display. To get it out of service test Press Pad # 1 and the Pad # 7 this will return you to PF mode.

[ (#1)(#2)(#3)(#4)(#5)(#6)(#7) (#8)(#9)(10)(11) ]

Press pad # 1 Active water valve Ultimate Scrub Maxx Clean Valve on =FL Valve off =rt

Press pad # 2 Test Speed motor (1 Time) motor @ 2800 rpms Speed Wash pad ”28′ First two digits motor speed

Press pad # 2 Test Speed motor (2 Times) wash motor @2950 rpms Speed Wash pad “29′ in display

Press pad # 2 Test Speed motor (3 Times) wash motor @3150 rpms Speed Wash pad “31′ in display

Press pad # 2 Test Speed motor (4 Times) wash motor @3450 rpms Speed Wash pad “34′ in display

Press pad # 2 Test Speed motor (5 Times) turns off wash motor No light on ”rt” in display

Press pad # 3 Test Dispenser dispenser powered Normal Wash on = “Sd” off = “rt”

Press pad # 4 Test Drain pump on/off China Crystal or Party glasses on = dP off = “rt”

Press pad # 5 Test Fan dry Active vent on/off Top Rack,Eco Wash Glasses on = Fan speed off = “rt”

Press pad # 7 Test Rinse aid level none Rinse only low = RE full = RF off = “rt”

Press pad # 8 Test Soil Sensor none Wash Silencer or Wash pressure on = sensor voltage reading off = “rt”

Press pad # 9 Test Thermistor none Wash Temperature on = Temperature in °F off = “rt”

Press pad #10 Test Heater on/off Heater on/off No Heat Dry on = HO off = “rt”

on Dec 23, 2009 | Dishwashers

1 Answer

New dishwasher...The Rinse Aid doesn't seem to be putting out any liquid. (How is it supposed to work?) Plus, dishes don't seem to be coming out as clean as expected. In your opinion what is the...


You won't see any liquid it comes out and gets rinsed off during the last wash cycle.As for detergant I think your best bet is to use the tablets. Like the three and one "Finnish " Hope this helps.

Jun 26, 2011 | KitchenAid 24 in. KUDI01FLSS Stainless...

1 Answer

My Kenmore Elite dishwasher gives a message "Rinse Aid Empty". What does this mean?


It means the rinse aid dispenser is empty.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 10, 2010 | Kenmore Elite 45986 Front Load Washer

2 Answers

Dishes are not always dry, even after sitting overnight


hi

make sure you are using rinse aid as this helps to evaporate the water at the end of the cycle in the drying stage. I know tablets have rinse aid built into the tablet but this can wash away on some wash cycles and do nothing so even if you are using tablets i reccommend still using rinse aid.

Jan 24, 2010 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Error code of "Er s" appears on the display and inside the light remains on at RINSE Low. HELP!


Many modern appliances have error code build in to the control programing to help with the diagnosis of a failure. Frigidaire dishwashers with display s will flash Er then a two letter error code.

Er i s a Switch error (Replace Console Pn# 154639207)

CE is a Configuration error (Replace Control Pn#154543602)

UO is a Vent that will not close. (Replace Vent Pn#154682301) or remove blockage

uF is a Vent fan Not running (Replace Vent Pn#154682301) or remove blockage

Other codes you my see in the display that are not errors

LO is Low rinse aid

PF is power failure

Ho is Water Heating

CL is close Door

01-24 hours of delay

Service Test

To enter service test you must turn off the power and PF will be displayed. While in PF press and hold Pad # 1 and Pad # 7 at which time an “rt” will appear in the display. To get it out of service test Press Pad # 1 and the Pad # 7 this will return you to PF mode.

[ (#1)(#2)(#3)(#4)(#5)(#6)(#7) (#8)(#9)(10)(11) ]

Press pad # 1 Active water valve Ultimate Scrub Maxx Clean Valve on =FL Valve off =rt

Press pad # 2 Test Speed motor (1 Time) motor @ 2800 rpms Speed Wash pad ”28′ First two digits motor speed

Press pad # 2 Test Speed motor (2 Times) wash motor @2950 rpms Speed Wash pad “29′ in display

Press pad # 2 Test Speed motor (3 Times) wash motor @3150 rpms Speed Wash pad “31′ in display

Press pad # 2 Test Speed motor (4 Times) wash motor @3450 rpms Speed Wash pad “34′ in display

Press pad # 2 Test Speed motor (5 Times) turns off wash motor No light on ”rt” in display

Press pad # 3 Test Dispenser dispenser powered Normal Wash on = “Sd” off = “rt”

Press pad # 4 Test Drain pump on/off China Crystal or Party glasses on = dP off = “rt”

Press pad # 5 Test Fan dry Active vent on/off Top Rack,Eco Wash Glasses on = Fan speed off = “rt”

Press pad # 7 Test Rinse aid level none Rinse only low = RE full = RF off = “rt”

Press pad # 8 Test Soil Sensor none Wash Silencer or Wash pressure on = sensor voltage reading off = “rt”

Press pad # 9 Test Thermistor none Wash Temperature on = Temperature in °F off = “rt”

Press pad #10 Test Heater on/off Heater on/off No Heat Dry on = HO off = “rt”


Let me know how this works out for you.


Benjamin

Dec 23, 2009 | Dishwashers

1 Answer

I want to change my rinse aid product


run it through a couple of empty washes or use it just to wash dishes without rinse aid. this should allow you to add rinse aid into the container after each wash there after just add more rinseaid. it could take a while to get full rinseaid coming out but eventually there should be only rinseaid in the container.

Apr 10, 2009 | Maytag 24 in. DWU7402 Built-in Dishwasher

1 Answer

Put rinse liquid detergent in dishwasher rinse aid compartment.


I did the same thing with my Maytag dishwasher, several times actually, before realizing I was putting blue dish soap in the rinse aid compartment which then wouldn't empty. Then my Maytag started making ominous noises during the rinse cycle (appliance guy said it was "cavitation" noise).

Appliance guy wanted to replace the whole detergent/rinse aid compartment but since he told me the noise was probably caused by the dish soap stuck in the rinse aid compartment, I decided to try to get rid of it first. Here is the method that worked for me; it took most of a day but saved me parts & labor:

1. Get some white vinegar--I used nearly a quart.
2. Fill the rinse aid compartment to brim with the vinegar (overfill) but don't put cap on
3. Raise the dishwasher door slowly until the vinegar drains into the lower part of the chamber (at least this is how my Maytag worked)
4. Agitate the contents as best you can by rapidly shaking the dishwasher door up & down.
5. I also used a small plastic medicine dropper jammed into small openings on each side of the rinse aid compartment to agitate the vinegar by squeezing air into them.
6. Drain the compartment by closing the dishwasher door (move it to full vertical)--vinegar will drain into the bottom of the dishwasher.
7. Repeat above steps a couple times, then fill again w/vinegar, put the cap on and let it stand for awhile. Then drain and repeat the whole routine several times.
8. Blue-colored vinegar will come out which is a good sign (or whatever color your dish soap was).
9. After awhile, I started pouring generous amts of very hot tap water thru the rinse aid compartment, alternating with white vinegar. (No reason you can't use hot vinegar also.)
10. Eventually, all the blue stuff came out & the see-thru levels of the rinse aid compartment were completely clear/empty.
11. Run the dishwasher (I decided to not put any rinse aid in). I got some overfoaming (from the washed out soap) the first time I ran it which I probably could have remedied by adding more vinegar & possibly salt, but the noises were gone!
I just ran the cleaned out dishwasher a 2nd time & it was back to its quiet self with no overfoaming.

Takes some patience but hey, beats a big repair bill!!

Apr 04, 2009 | Kenmore Dishwashers

2 Answers

Fisher paykel will not complete rinse spin cycle


will sence it will spin once the water is out .that must mean your pump is restricted.unplug go to buttom of washer find pump and clean out

Dec 31, 2008 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Hotpoint dishwasher dwf50


i had the same problem and like an idiot paid for hotpoint to come out and all the guy done was tip the dishwasher backwards to empty the water(which he didn't clean) and tell me that im using to much rinse aid and salt coz we use 4 in1 tabs hope this helps smiley

Mar 20, 2008 | Hotpoint 24 in. FDW60 Free-standing...

Not finding what you are looking for?
Smeg 24 in. DWD1SSE-1 Built-in Dishwasher Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Smeg Dishwashers Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Cleverer2

Level 2 Expert

298 Answers

Garth Jackson

Level 2 Expert

93 Answers

Are you a Smeg Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...