Question about BenQ PB6200 Multimedia Projector

1 Answer

My pb6200 benq projector's colour is wrong. Missing green. Has a lot of blue & red. How do I fix this please? Have since replaced the lamp - does the same with both old & new lamp. Also has a tendency to start-up upside-down for no apparent reason. This is nothing to do with the colour though. Thx

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 75 Answers

Your correct about missing your primary color. this could be either your cable or the connection at the projector could have a bent pin on the port. not sure what your trying to display computer?

Posted on Jun 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I see no red and green colors on screen projected by pjtx 100, the rest of the colors are visible.


If you are using a component video cable (Red, Green, Blue) you may simply be missing the Red cable. It may not be fully plugged in.
You can verify that this is the case by: 1. Unplugging all video cables 2. Plug in the green cable, you should see a black and white image. 3. Plug in the blue cable, you should see some colours coming through. 4. Plug in the red cable, you should see all colours properly.
If not, unplug the blue and red cables and plug the blue cable into the red port. The colours will look incorrect, skin tones will be blue. If the colour comes through the problem is the cable. If the colour does not come through, the problem may be the projector.

Feb 28, 2011 | Hitachi PJTX100 Multimedia Projector

1 Answer

Turn on benq pb6200 with new bulb all I get is humming and no led


same problem here. checked fuse, mainboard seems ok. nothing looked blown.

Jul 15, 2010 | BenQ PB6200 Multimedia Projector

1 Answer

The color of the presentation is distorted when it is projected from the BenQ DX660 Projector. It looks like the red is not coming through.


I I may have you try a simple test first, I have seen several no red problems fixed by changing or wiggling the vga lead to the computer. Also look for bent gold pins on the vga lead. I would do that first. Also go through the menu system and see if there is red in one of the icons on the screen to see if it is showing correct colour.
Good Luck!

Dec 17, 2009 | BenQ Replacement Lamp Projector Lamp For...

2 Answers

Flickering dots on Benq PB6200 projector.


it's not the lamp. if you've replaced the cords and still have the problem, reset the settings to factory default to make sure the resolution matches. if still not ok, there may be an issue with the main board.

Oct 04, 2009 | BenQ PB6200 Multimedia Projector

1 Answer

Blue instead of red colour afer replacing lamp in sharp xv-z2000


You didn't put your 3-D glasses on backwards, did you? :)

Seriously, if you are using the component inputs, be sure the three cables didn't get mixed up when you put the projector back. Otherwise, you might have an issue with the color wheel inside the projector, but I doubt it.

Dec 31, 2008 | Sharp XV-Z2000 Multimedia Projector

3 Answers

BENQ PROJECTOR


Mine needed a "fan module" replaced. The part number is 60.J8613.011.

Cost was $60, plus $100 for labour.

Nov 05, 2008 | BenQ PB6200 Multimedia Projector

1 Answer

Benq PB6200 projector lamp or other problem


Hi there

I replaced a Mainboard on a BenQ PB6210 just yesterday - had all the same symtoms.

No LED lights coming on but the rest of the buttons has light.

Tried every other component from the lamp to the colourwheel , but the Mainboard replacement fixed it in the end.

You'll be looking at about $95 for the part

Apr 07, 2008 | BenQ (200NSH-LAMP) Projector Lamp for...

1 Answer

VP6310 Colour problem


You need to replace the color wheel sensor. I can fix it.

Dec 10, 2007 | HP VP6310 Multimedia Projector

Not finding what you are looking for?
BenQ PB6200 Multimedia Projector Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2237 Answers

Tom Chichester

Level 3 Expert

34762 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a BenQ Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...