Hello, We have a Ricoh Aficio AP410N Laser printer. It stoped working and gives the error code SC514.
Resetting it didn't help. Could you please advise? Many thanks
The printer doesn't do anything at all any more. It just gives me an Error code: SC514. Any idea? Thanks in advanceThe printer doesn't do anything at all any more. It just gives me an Error code: SC514.
Any idea? Thanks in advance
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
fuser problem, push in order clear modes (yellow button) 1 0 7 and hold the red stop button for 5 seconds the screen will change, turn off copier red power switch and turn back on if problem comes right back you need a service call
• After the technician replaces the fusing unit, the maintenance counter must be
reset with engine SP mode 7-804.
• 7-804-1: Transfer roller
• 7-804-2: Paper feed roller
• 7-804-3: Fusing unit).
There is no SC514 on an AP410N. Do you mean SC541? SC541 is a fuser code that a technician has to reset. It could be something as simple as a power spike, or it could be a dirty sensor or a blown board.
Did you take out the toner cartridge and paper trays and open all the covers to try to find the misfeed? If there is really nothing there, you can try turning the printer off and back on to see if it clears itself.
You need to check 3 cause for that error:
- hot roller thermistor out of position
- fusing lamp broken (can you see the lamp going on at startup?)
- thermostat broken
If you are just a user, without any technical knowledge, i advise you to call a Ricoh Support Service.
unbelievable... you guys charge for discussion??!!! get real! i'll find one of about 1,000 free places where i can discuss this and find an answer....
puleeze
The printer doesn't do anything at all any more. It just gives me an Error code: SC514.
Any idea? Thanks in advance
×