Question about Fuji FinePix J10 Digital Camera

1 Answer

My flash has stopped working - Fuji FinePix J10 Digital Camera

Posted by on

  • dd_65 Jun 01, 2010

    Thank you for your reply, i have tried all the flash settings, even the forced flash, it just won't work.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,170 Answers

Have you checked the flash settings, quite often the flash accidently gets turned off, on most cameras the buttton looks like a lightning bolt. Toggle through the settings if it is not on a button on the camera.

Posted on Jun 01, 2010

  • Arjun Komath Jun 01, 2010

    Have you checked the flash settings, quite often the flash accidently gets turned off, on most cameras the buttton looks like a lightning bolt. Toggle through the settings if it is not on a button on the camera.

  • Arjun Komath Jun 01, 2010

    There is a capacitor inside the camera, which might have blown off. The capacitor that controls the charging of the flash has a tendency to do so. You might have to get it replaced from Fuji Support. It will cost you around $100.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Light wont stop flashing


Light flasher will not stop flashing.

Jan 13, 2014 | RCA Televison & Video

1 Answer

The flash works when switch on then stops


Sounds like faulty flash capacitor, This is not a user fix, needs to go to shop.

Sep 22, 2012 | Kodak EasyShare M530 Digital Camera

1 Answer

Flash 380EX with EOS 40D and 18-55 Canon lens. At all zoom positions under 55mm the flash is too weak and the pictures are underexposed. At 55 mm flash works fine. Pushing "*" button does NOT...


You may need to adjust the flash exposure compensation about 1 stop or try 1 stop and if it's still not enough go a stop and a third. What's happening is the flash is being dispersed over a much wider field of view and the fall off is so much greater then at 50mm which the beam is narrower. The 380 EX works well from 35mm through 135mm. After that it still works if you are in close say 20 to 30 feet.

May 02, 2011 | Canon 380EX TTL Flash

2 Answers

Flash will not work


Before you give up on the camera:

There are many setting that can affect whether the flash works or not.
You may have inadvertently set something that is stopping the flash from working.

Get out your User Manuals and use the index at the back of the book.
Look for something about "Resetting the camera".

This will reset the camera to factory specifications.
Then see if the flash works.

If that does not work ... recharge the battery and try again.

If that does not work, the flash is likely dead.

May 30, 2010 | Canon PowerShot A590 IS Digital Camera

2 Answers

My 2GB Lexar flash drive has stopped working. It


A flash card wears out every single time you use it. Yours has just reached its end of life - it's dead. Replace it.

May 06, 2010 | Lexar Professional High-Speed 2GB Secure...

1 Answer

Flash stopped working


Before you give up on the camera:

There are many setting that can affect whether the flash works or not.
You may have inadvertently set something that is stopping the flash from working.

Get out your User Manuals and use the index at the back of the book.
Look for something about "Resetting the camera".

This will reset the camera to factory specifications.
Then see if the flash works.

If that does not work ... recharge the battery and try again.

If that does not work, the flash is likely dead

Jan 05, 2010 | Canon PowerShot A590 IS Digital Camera

1 Answer

Turn signal lights stop working. Neither the right or left turn signal work. Heard a noise before it stop working. The flashing started slowing down and stop blinking. Now it doesn't work at all. What


most likely its the turn signal relay. which is under the hood. in the fuse box. also make sure ur running lights are working if they are connected to the turn signal.

May 08, 2009 | 1993 Nissan Pathfinder

1 Answer

Fujifilm FinePix 3800 flash will not work


Normally when the flash stops working it is because the capacitor the camera uses to store the flash power ( that is what charges..not the bulb) burns out. This is a very difficult repair and should only be completed by a camera technician.
If the repair is over 10 dollars I would suggest a new camera.

Jan 28, 2009 | Fuji FinePix 3800 Digital Camera

1 Answer

The flash isn't working


might be obvious, but try replacing the batteries. also during continuous shot mode, flash will be automatically set to off. otherwise contact samsung for repair estimate. Good luck

Mar 13, 2006 | Samsung Digimax A6 Digital Camera

Not finding what you are looking for?
Fuji FinePix J10 Digital Camera Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...