Question about Ricoh Aficio 250 Copier
Exposure lamp ,lamp stabilizer board . dirty white plate .dirty optics.SBU board .CCD
Posted on Jun 07, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 18, 2013 | Kyocera Mita Mita Copier Toner Cartridge...
May 23, 2012 | Kyocera Mita Km 3035, 4035, 5035 Fs9120dn,...
Broken fixing heater wire
• It takes 15 s or more for the fixing temperature to reach 50°C/122°F after the power is turned on or the safety switch is turned off and on.
Fixing unit thermistor installed incorrectly.
Check and reinstall if necessary.
• It takes 10 s or more for the fixing temperature to reach 100°C/212°F from 50°C/122°F.
• It takes 24 s or more for the fixing temperature to reach the secondary stabilization fixing temperature from the primary stabilization fixing temperature.
Fixing unit thermostat triggered.
Check for continuity. If none, replace the fixing unit thermostat.
Nov 03, 2010 | Kyocera Mita KM 1510 Laser Printer
Oct 06, 2009 | Kyocera Mita KMR-1810P Laser Printer
Jun 17, 2009 | Kyocera Mita KM-4035 Printer
Jun 20, 2008 | Kyocera KM-1505 Copier
298 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: