Question about Frigidaire ATF6000ES Front Load Washer

1 Answer

I have a Frigidaire Front Load Washer during its cycle usually 24 and 16 min into the wash cycle it will stop and beep giving a E10 error message. What does this mean?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Frigidaire Master
  • 12,061 Answers

The cause of the error is that no cold water is getting through the cold water valve (inside the machine).

The E10 error indicates that one of a group of error codes occurred. The specific code could have been one of the following:

  • E11 - Fill time too long. (See test 1 below)
  • E13 - Water leak in the tub or air leak in the air bell. (See test 2 below)
  • E14 - Dispenser drawer reed switch is open. (See test 3 below)
To recall the specific fault code from this group, follow these steps:
  1. Wake the machine by pressing any button
  2. Wait 5 seconds
  3. Press and hold the Start and Pause/Cancel buttons simultaneously
  4. All LEDs will go blank and after a few seconds the control will signal the stored code
Based on the specific error code, follow the specified test and troubleshooting.
The magnet for the dispenser drawer reed switch is shown in the second image below. If this magnet is missing, you will get the E14 code.
Some of the troubleshooting provided is intended for service technicians. Do not conduct any test or troubleshooting that you are not completely confident that you can safely complete. Unplug the washer before accessing internal components.

http://appliancejunk.com/forums/index.php?topic=1364.0
That website above directly addresses your issue.

Posted on Jun 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wash machine quits mid cycle


Your Circuit Control Board is starting to Fail.... The Electrical Reset is the give away....

Mar 03, 2014 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Error E10 keeps popping up and washer stops 2 or 3 times during cycle and have to reset it


E10 means that your cold water is coming in too slow, disconnect the cold water hose and check to see if the screen on your washing machine is clogged. If the screen is clean and the hose has good pressure then you will need to replace the water valve on your machine--- this is the piece that the hoses directly connect to.

Here could find additioan sample guide details: fixed-frigidaire-affinity-washer-gives-e10-error

Hope helps.

May 03, 2011 | Frigidaire ATF6000ES Front Load Washer

1 Answer

During any cycle washer will stop and beep and flash E10. after pushing start it will continue, sometimes will do this several times in a load.


i believe that code is water related not getting enough water maybe drain hose is too far down drain and unit is siphoning

Apr 18, 2010 | Frigidaire GLTF2940E Gallery 3.5 Cu. Ft....

1 Answer

Kenmore front load washer error code E 10 - washer stops and beeps periodically and needs to have start button pushed again to complete cycle. Seems to happen one minute into cycle and then a coupleof...


1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 11, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

EFO, E10 error Message


Frigidaire, Zanussi, AEG, & More....

EFO = Filter Blocked (low flow) and it is accessible from the bottom front of the machine.

1. there is a blockage in the filter or drain hose.takes too long to drain out.
2. over dosing of powder or liquid. again can cause an air lock in the pump which slows the drain pump down.

Check the filter and drain hose and test again. this fault will only come up at the end of a cycle.
You do not need to reset the machine to get rid of the fault code as this is automatically deleted.

Run an empty load with no detergent in an attempt to get rid of the code.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Feb 09, 2009 | Frigidaire GLTF2940E Front Load Washer

1 Answer

E10 error code


1 beep and E10 is listed as the dispenser door is open. Try reclosing your soap dispenser door tight.

Jan 18, 2009 | Frigidaire GLTF2940E Gallery 3.5 Cu. Ft....

1 Answer

I have a Frigidaire Gallery front load washer with E10 error code


When ours does that it is because of the hard water build up. We have to un-hook the hot water clean out the minerals and it stops doing it.

Jan 10, 2009 | Frigidaire ATF6000ES Front Load Washer

2 Answers

E10 error on Frigidaire GLTF2940ES


I searched the internet for a list of error codes for the washing machine. The E10 error code indicates an interuption in water supply among other things. We checked the supply lines and found that the screen on the cold water line had been blocked by sediment ( we have well water,and just replaced the pump).

Nov 29, 2008 | Frigidaire GLTF2940ES Front Load Washer

Not finding what you are looking for?
Frigidaire ATF6000ES Front Load Washer Logo

534 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

Jason Harris
Jason Harris

Level 2 Expert

264 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...