Question about D-Link DSL-G604T Wireless Router

3 Answers

I cannot set up wap security for wireless d-link g604t. everyone can connect without password.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

I had the same issue last night and discovered that if I left the SSID at the router default (DLINK_WIRELESS) it would not save the wireless security settings. Unsecured wireless.

Then I changed the SSID to MYSSID and all the WEP and WPA settings I set worked fine when I did the required SAVE and REBOOT (System>>Tools>>Save and Reboot)

Posted on Jun 11, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I cannot change my wep key

Posted on Jul 24, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 12,061 Answers

Www.cstuff.co.nz/.../D-Link/DSL-G604T%20GenII%20Installation%20Guide.pdf -
user manual above it shows you how to do it in the security section. Basically you loginto the router give logon and password, then go to security and set a WAP/WEP "Key" All in manual above..

Posted on Jun 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot connect to the WIFI at work, but I can connect to my WIFI network at home, and other public networks. The wireless network at work is pushed by a D-Link 8200AP with a WAP security, just like it is...


Your laptop cannot connect to your work's wireless network because the security settings (ir WAP) in the D-Link is different to the security setting in your Netgear.
The wireless card in your laptop will need the settings changed to suit the D-Link's wireless settings ie the SSID and WAP.
You will need to change the wireless card settings in your laptop back to the Netgear's wireless settings to connect to your wireless network at home.
Some wireless cards allow you to set up different profiles for different wireless networks which allow you to switch wireless networks easily by just selecting the profile for the network you want to connect to.

Jun 25, 2011 | Apple iBook G3 Mac Notebook

1 Answer

How to change the contection / wpa2 password on a D-Link dsl-g604t


1. Navigate to router's web interface
2. Login, click to Wireless button
3. Select WPA radio button as Security
4. Select Pre-Shared Key radio button and type some password to PSK String field
5. Click Apply button
6. To save and reboot the Router, click on the Tools directory tab and then click the System button. In the System
Settings window, click the Save and Reboot button under Save Settings and Reboot the System


DSL-G604T doesn't have built in MAC access list and may hang on heavy usage. To optimize it for stable and safe connection use Router Commander program from http://www.routercommander.com, with it this router shows very good performance and stable internet connection.

Aug 25, 2010 | D-Link DSL-G604T Wireless Router

2 Answers

How do we secure our Wireless router Up until we have been using a cable router and now wish to use a DSL-G604T model which is up and running but in an unsecured mode.


1. Navigate to router's web interface<br /> 2. Login, click to Wireless button<br /> 3. Select WPA radio button as Security<br /> 4. Select Pre-Shared Key radio button and type some password to PSK String field<br /> 5. Click Apply button<br /> 6. To save and reboot the Router, click on the Tools directory tab and then click the System button. In the System<br />Settings window, click the Save and Reboot button under Save Settings and Reboot the System<br /> <br /> DSL-G604T doesn't have built in MAC access list and may hang on heavy usage. To optimize it for stable and safe connection use Router Commander program from <a href="http://www.routercommander.com">http://www.routercommander.com</a>, with it this router shows very good <span style="FONT-SIZE: 10pt; FONT-FAMILY: Arial; mso-fareast-font-family: 'Times New Roman'; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: HE">performance </span>and stable internet connection.

Aug 17, 2010 | D-Link DSL-G604T Wireless Router

1 Answer

Cingular WAP settings


Hi..i am providing you with the WAP and other settings,but still if you need any help,then please contact Cingular at 866.CINGULAR(866-246-4852)

For CSD (Wireless Internet)
Function Setting
Settings Name: Cingular Wireless Internet
Home Page: http://device:home or http://device.home
Session Mode: Permanent
Connection Security: On
Dial-up Number: 14152441012
Gateway IP Address: 66.209.11.61
Authentication Type: Secure
Dial Type: ISDN (on network)
Analogue (off network)
Login Type: Automatic
User Name: WAP@CINGULAR.COM
(All upper case)
Password: CINGULAR1
(All upper case)

For GPRS (Wireless Internet Express)
Function Setting
Settings Name: Cingular Wireless Internet Express
Home Page: http://device:home or http://device.home
Session Mode: Permanent
Connection Security: On
APN: wap.cingular (lower case)
PDP_Type: IP
Gateway IP Address: 66.209.11.61
Authentication Type: Secure
Login Type: Automatic
User Name: WAP@CINGULARGPRS.COM
(All upper case)
Password: CINGULAR1
(All upper case)

Now to set up MMS (Multimedia Services)
Name: MMS
Homepage: http://mmsc.cingular.com
Gateway IP 1: 66.209.11.61
Port 1: 9201
Domain 1: (blank)
Service type 1: WAP
Gateway IP 2: (leave alone)
Port 2: 9201
Domain 2: (blank)
Service type 2: WAP
DNS 1: (leave alone)
DNS 2: (leave alone)
Timeout: 10 minutes
CSD No.1 14152441012
Username 1: WAP@CINGULAR.COM
password: CINGULAR1
Speed(bps): 9600
Line type 1: ISDN
CSD No.2: (blank)
User Name 2: (blank)
Password 2: (blank)
Speed(bps)2: 9600
Line type 2: ISDN
GPRS APN: wap@cingular
Username: WAP@CINGULARGPRS.COM
Password: CINGULAR1

Good luck :-)

Apr 22, 2010 | Computers & Internet

2 Answers

My D-link G604T connects with WEP but not with WAP


When you change the WPA encryption in the wireless router, you also need to configure the wireless card in the computer with these settings.
Please click in this link to secure your wireless network, configure the wireless router and the wireless card in the computer and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Feb 03, 2010 | D-Link DSL-G604T Wireless Router

2 Answers

I do not remember my wireless connection password so my son can connect his new notebook to my network.


First connect your router to computer with ethernet cable.
Then access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user as "admin" and password as "admin" or blank or "password"
then you can see configuration page of router settings.
Go to wi fi or wireless menu then find WEP or WAP security code key it is your password to connect wi fi network.If it is in * or # format then add new code so you can connect it with new code.
then save settings and restart router.
Let me know if you need more assistance.
Thanks.

Nov 08, 2009 | D-Link DSL-G604T Wireless Router

2 Answers

I can't set a password on accessing DSL-G604T wireless router.


you want to secure the wireless network.
Is there any computer connected to the router with the ethernet cable ?
If not then you will need to connect the computer to the router with the cable.
check the ip address on the computer.open the set up page of the router.once you open the router setup page, you will find the option to make it secured.
Click Here for more info

Nov 05, 2009 | D-Link DSL-G604T Wireless Router

1 Answer

How to create a security enable router?


Firstly, confirm that your ISP connection for email and internet is working correctly. Then connect the router to the ISP using the ADSL plug, and to your computer using the ethernet connection. It is best to set up your router using a wired connection to your computer. Once set up, you can connect your computer using WiFi. Have your ISP username and password handy.

There are two steps to secure your router:

1. Change your ADMIN password. Using a web browser like Intenet Explorer, type in the address, http://10.1.1.1. This should take you to a sign-on screen. Username is "admin", and password is set at the factory as "admin". You should now be logged in to your router. Go to the TOOLS tab, and change your admin password. NOTE THIS DOWN FOR FUTURE REFERENCE.

2. Secure the wireless part of the network: Go to the HOME tab, and select either WEP security (good) or WPA security (better, but some devices like printers don't like this).

For WEP you will need to enter a 10-digit WEP key. Numerals will do, or you can use hexadecimal (base 16) notation if you know this. Numerals will do and are no less secure. NOTE THIS DOWN in a secure place. Click the "APPLY" button.

For the WPA alternative, you should select the "Pre-shared Key" radio button, and code in your WPA password in the "PSK String" field. This can be a word and or numerals. I don't think spaces or other characters are allowed. NOTE THIS DOWN in a secure place. Click the "APPLY" button.

That's IT!! You've changed the admin password and secured the wireless part of the network.

You will then need to code the WEP or WPA password into the devices like printers and computers that you want to connect to the WiFi. For Vista computers, right click on the network icon in the tray (two little computers overlapping) and select "Connect to a network". Enter the WEP or WPA password when you see SSID "default" or your SSID if you've changed it. Most printers have a connection wizard.

There is a further enhancement if you are really paranoid: change the SSID and turn off the SSID broadcast. Go to the manual at:

ftp://files.dlink.com.au/products/DSL-G604T-GenII/Manuals/DSL-G604T_GenII_Manual_v1.11.pdf

if you want further details. Good luck with your secure network.

Jan 19, 2009 | D-Link AirPlus G DSL-G604T (790069265662)...

1 Answer

How do i encrypt my dlink


Hi!
Try this link this will give you a step by step guide on how to secure the wireless connection on your adsl gateway. click here.

Jul 31, 2008 | D-Link DSL-G604T Wireless Router

Not finding what you are looking for?
D-Link DSL-G604T Wireless Router Logo

Related Topics:

488 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...