First power on to tv.Check all the three indication front LED lights.The power,Fan temp,projection Lamp LEDs.If the Fan temp or the Lamp LEDs lights on or flashes.The projection lamp life is over,need a new projection lamp.After replaced the projection lamp,power on u hear alot of clickings,that mean the Ballast board is dead,this board help to ignite the projection lamp.Replaced the Ballast board.Ur tv should work now.
Hello
When the TV has been powered on long enough for the lamp unit to get hot, it may take several minutes for
the picture to appear on-screen. See "IMPORTANT NOTICE ABOUT HOT LAMP R
When the TV has been powered on long enough for the lamp unit to get hot, it may take several minutes for the picture to appear on-screen
in the following situations:
• When the Quick Restart™ feature is set to OFF and you turn the TV off and then on again within a few minutes.
• If the TV is on when a short-term power failure, power surge, or other similar power failure occurs, such that the TV loses and regains
power within a few minutes.
This is a property of DLP TV lamp technology and is NOT a sign of malfunction.
If this occurs, the green LED on the TV front panel will blink (and the red LED will be lit solid) until the TV is finished restarting the lamp
and the normal picture appears. If BOTH green and red LEDs are blinking at a one-second rate, you will need to turn the TV off and then
on again to restart the lamp.
ESTART" on page 8. if this no good check the lamp in side to see if it's not burn't out good luck
regards
shaun
430 views
Usually answered in minutes!
×