Question about Audio & Video Receivers

2 Answers

Kenwood ddx5032 will not upload pictures for background

Posted by on

  • Anonymous Nov 15, 2008

    im using a nano. could it be the ipod?

  • Glenn
    Glenn Dec 14, 2008

    I have the same problem, I have tried using images on USBmemory stick as well as images on a CD, but it still doesn't let me access the images, the touch-screen buttons seem to be grayed-out

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I finally found a way to change the Background Image on my Kenwood DDX5032.

Firstly I made up some JPEG (.jpg) images in Photoshop and made these 480(pixels wide) x 234 (pixels high). I then put three of these images on to a USB Thumb Drive, made sure my stereo was on "Tuner" (source set to Tuner) and then switched off the ignition. Then I followed these steps:

  1. With ignition off, plug in the USB Thumb Drive,
  2. Turn ignition to accessories,
  3. Pressed the "Setup" button,
  4. Pressed the "User Interface" button,
  5. Pressed the "Memory" button listed under "User Background" (as this was no longer greyed out),
  6. Selected the picture file I wanted to load,
  7. Waited for the picture to upload in to the stereo's memory and the screen to return to the "User Interface",
  8. Pressed the "Change" button under "Background Change",
  9. Selected the picture I wanted and pressed "Enter",

...and voila, it was done. The instruction manual shows additional information if you have multiple folders or files. I hope this works for you as it did for me.

Cheers,
Glenn

Posted on Dec 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thank you Glenn.. !!

Posted on Feb 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenwood vr-6070, hums for 2-3 minutes with no audio on cold start. After that plays BEAUTIFUL! what could that be?


If the unit is an older unit around 2005 look for a failing capacitor.

The SMD (surface mount capacitors ) are known to fail on many similar stereo receivers manufactured in that time, including my own.. With great difficulty I replaced the SMD capacitors with radial capacitors primarily the 100uf. Make sure that the replacement capacitors are low ESA (equivalent series resistance) type.

Look for 100 uf capacitors that filter the 3.3 volt power.

Hope this helps>
26335229-yvwnc0cs04icahnhqbjaihos-4-0.jpg The failing capacitors may not appear to have any physical deformity. If they do you can be very sure they are the problem!

26335229-yvwnc0cs04icahnhqbjaihos-4-2.jpg Link to Service Manual


http://www.go-gddq.com/upload/2013-06/25/201306217.pdf
26335229-yvwnc0cs04icahnhqbjaihos-4-5.jpg

Oct 31, 2016 | Kenwood Audio & Video Receivers

1 Answer

I have a kenwood Auto video surround receiver DR / 409 how to reset it


PDF]KRF-V8030D VR-409 - Kenwood

manual.kenwood.com/files/B60-4593-00.pdf
VR-409. INSTRUCTION MANUAL. KENWOOD CORPORATION. B60-4593-00 (EN) ...on the country and sales area. AUDIO VIDEO SURROUND RECEIVER ...

Kenwood VR-409 Manuals

www.manualslib.com > Brands > Kenwood Manuals > Stereo Receiver
View online or download Kenwood VR-409 Instruction Manual. ... Kenwood Instruction Manual Audio Video Surround Receiver KRF-V8030D VR-409.

Kenwood VR-409 Receiver Repair Questions, Solutions ...

www.fixya.com > Forum > Audio & Video Receivers > Kenwood
Recent Kenwood VR-409 Receiver questions, problems & answers. Free expert DIY tips, support, troubleshooting help & repair advice for all Audio & Video ...

Kenwood VR-409 PDF Owner's Manual Download & Preview

www.manualguru.com > Kenwood Manuals > VR-409

Feb 03, 2016 | Kenwood Audio & Video Receivers

1 Answer

Show me a pictorial diagram of a dipole antenna connected to a stereo reciever


8_18_2012_7_54_11_pm.jpg

You didn't list your receiver model number, but here's a generic picture of how you would connect an indoor FM dipole antenna to a Kenwood receiver. These antennas should be available at most home improvement stores or from Radio Shack. They cost around $10.00, maybe less.

Depending on your model, you may have use some adapters. Ask the store staff for help.

Aug 18, 2012 | Kenwood Audio & Video Receivers

1 Answer

Can i hook up my cd player which is a kenwood cd-323m to a vr507 kenwood receiver


hi,
Yes you will be able to connect the same. Connect the line output of the KENWOOD CD 323M to the CD input of the KENWOOD VR507 receiver using a stereo RCA cable. The picture of the cable is added.




ok
9_14_2011_9_08_03_am.jpeg

Sep 12, 2011 | Kenwood VR-507 Receiver

2 Answers

Cannot get the receiver to connect to a newer


It would be the rare TV that originated anything approaching the sound quality of any other audio source in your home or could process digital multichannel audio anywhere near as well as the Kenwood. What model TV did you say this was? Its internal audio controls could also be part of the problem.

TV-related audio is best derived from as close to its source as possible. Your cable, satellite DVD, BD all have superior digital multichannel audio outputs. Why would you want to filter them through the TV first?

Those sources may also have HDMI which would be great for the TV; they also have standard RCA stereo outputs, each of which could be suitable to run to the TV's RCA inputs if you only want to watch news or weather with lo-fi sound.

Bottom line recommendation: BEST video to the TV; best audio to the Kenwood.

Mar 20, 2010 | Kenwood VR-507 Receiver

1 Answer

Im having a problem with my kenwood VR-7070 receiver.I have my DVD player hood up to it using an optical cable and s-video. The sound comes in digital sounds amazing but the souround sound music is so much...


No unfortunately this is the way movies are made. I know what you are feeling it is the most annoying thing ever. The only thing you can do is turn down all the surround speakers and turn up your center channel. the voices and talking are always output through the center channel. So you have to do a lot of messing around to get the best settings for you. I am an audiophile and I will never understand why they make the background sound/music in some scenes so much louder then any talking. Hope this helps if you have any other questions please let me know.
Thanks,
Lee

Nov 05, 2009 | Kenwood VR-7070 Receiver

1 Answer

Kenwood VR-6070: Broken volume knob; will IR sensor still work?


Looks like you have several faults?
First try to fix the remote:
http://www.instructables.com/id/Repair-your-remote-controls/

May 28, 2009 | Kenwood VR-6070 Receiver

1 Answer

Kenwood DDX5032 - Cant Play DVD Movies


If your playing a dvd while in Gear or on the move It wont allow you. Only when your in park and stopped.

Aug 28, 2008 | Audio & Video Receivers

1 Answer

Sound ahead of picture


how are u setting it up rca outs to sterio rca ins ? ona ch or digital opti cable from tv back to setrio ? whats tvs output formatt at pcm or bitstream same with dvd

Feb 06, 2007 | Kenwood VR615 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

690 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...