Question about Danby DPAC7099 Air Conditioner

1 Answer

Water spill What is the garden hose for?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

1) Press the POWER SWITCH key (Fig. G) to
switch the unit on.
2) Press the MODE key (Fig. H) until the DRY
indicator light illuminates on the control panel
(Fig. I). Each depression of the MODE key will
advance to a different mode setting (Cool -
Dehumidify - Fan - Auto )
3) If the room temperature is > 25°C (77°F), fan
speed can be adjusted. Press the FAN key (Fig.
J) to select the desired FAN SPEED setting. Your
selection will appear on the control panel. Each
depression of the fan key will advance to a
different fan speed (High - Med. - Low )
as shown in Fig. K. Otherwise fan speed is fixed
to low.
Note: The warm air exchange hoses must vent
inside the room when using Dehumidify mode.


Water spill - fd48a4d.jpg

Posted on Jun 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Water not sucking in to do a load of washing


turn off water supply have towel handy for spill ,slight, unscrew hose, like garden hose, may need adj. pliers, remove hose check./ clean filter in hose reconnect turn on water test. hot water may also need to do same turn off water behind mach. repeat as for cold.

Apr 09, 2015 | Washing Machines

1 Answer

Spilled laundry detergent into lint trap and blower


Hard way.
You will need to take the whole machine apart and take the blower out to clean it.
As you progress, you will see what tools and steps you will be needing. About an all day job.
Easy way.
Unhook the dryer air hose and electric cord.
Move the dryer to a place that wil allow you to wash it out with a garden hose.
Tip the dryer forward onto it's face and from underneath, wash the blower out with a garden hose.
Please don't use a whole lot of pressure.
Should dry in a few hours.
Keep the water out of the rear where the heating element is.
About a 1 hour job, with out drying time.
Be blessed

Jan 23, 2013 | Maytag Centennial 7.0 Cu. Ft. Super...

1 Answer

How to i flush a radiator on a 2000 expedition and what tools do i need?


you need, knife/ gear clamp,screwdriver /nut driver (for gear clamp) and garden hose
with water pressure hook up hot water is better
you can buy a can or to of rad flush but dishwasher soap works good (it wont suds up )
also rad flush kit with garden hose addapter (most kit are compatable)
1-drain existing coolant in container for recycling
2-locate heater return hose to block and cut to installed flush kit addapter
always better to reveres flussh system with engine off and rad cap removed
drain valve closed hook up garden hose and run hot tap water true system
it will eventually cove out your rad cap (surge tank) until it runs clear
know sut off the garden hose add your cleaning additives installed rad filler cap
run engine per direction on can or 10 to 15 min. sut off engine removed filler cap
open drain valve on radiator and drain out system open water from garden hose
run water until clean water run true shut off garden hose and removed cap off with
cap supplied with kit let system drain completly . repeat cleaning operation until
water runs clear
add 1 jug of concentrated coolant (will mix with ressidual water and finish filling
system with premix used recomended coolant only for your engine your freeze
point of new coolant should be above spec and will be fine
do not used pure concentrated coolant only .your ownners manual spec section will
give capacities system will hold

Apr 03, 2011 | 2000 Ford Expedition

1 Answer

The hose that drains the machine is spilling out water. Is there some kind of blockage in the line caused by detergent??? The plumber snaked the line but water is still spilling out of the drain pipe.


is the hose in the washtub?  It's not laying on the floor is it ??  if it is, it has to be 36 - 42 inches off the floor or water will just go in and out...

Jul 28, 2010 | Kenmore HE2 Plus Front Load Washer

2 Answers

My washer stopped during the spin cycle. Now I can get it to fill with water But aggitate and spin it just makes a noise and the tumbler is locked up tight


Your shaft coupler / motor coupler has likely broke. Not too hard to fix yourself, but you will have to remove the water from the washer first.

Remove the clothes, place them in the bathtub. Roll a garden hose from the washer to outside where drain water won't matter. Tape the garden hose to the drain hose, and lower the drain hose to the floor. Water will flow through the garden hose outside. Turn the washer over, follow directions supplied with new part, and replace the motor coupling. When finished, reorient the washer, remove the garden hose, place drain hose in the drain stand pipe. Run the washer through a couple of full cycles, then rewash the clothing.

Jun 11, 2010 | GE WBSR3140DW Top Load Washer

4 Answers

HOW TO DRAIN WATER IF MACHINE SOPS AND WONT RESTART


I take it that you have tried rotating the cycle knob slowly through the point at the end of the wash cycle to the rinse cycle? On many machines, this will trigger the pump to drain the tub. Yet I am guessing that you have already tried that.

You could try running a garden hose from the machine along the floor and then outdoors. Next, take the end of the garden hose and place it into the top of the machine so that the end of the garden hose goes to the bottom of the tub. Feed in another five feet of garden hose into the machine so that this five feet is below the water level. Now, hold the palm of your hand over the end of the garden hose at the bottom of the machine and while doing this, pull out the extra five feet of garden hose and then remove your hand from the end of the garden hose. This should have "primed" the end of the garden hose with water so that the water will get sucked out of the machine and flow through the garden hose to the outdoors.

If this doesn't work, then you will need another person to **** on the other end of the garden hose in order to get the water to start flowing through the garden hose.

Apr 25, 2009 | Maytag MAH2400A Front Load Washer

3 Answers

Ice trays not filling with water


I know where the solenoid is, my question is I have water pressure into it, but not out of it, no warranty, trying to fix it myself, is this the probable cause of my problem, or could it be something else? I can hear what sounds like water running near the ice tray,but can't figure out where it is, also, when I recently filled the fresh water holding tank, it spilled over inside before spilling over exit tube of holding tank. Is this connected?

Mar 26, 2009 | U-Line Icemaker

2 Answers

I'AM LOOKING FOR A DIAGRAM OF THE COOLING SYSTEM; SO I CAN DISCONNECT THE HEATER HOSE AND USE A WATER HOSE TO RUN THROUGH IT TO SEE IF ANY DEBRIS ARE TRAPPED BLOCKING WATER FLOW


This is how I flush the heater core...go to the garden department at Wal-Mart and get a 5/8 - 3/4" female garden hose connector similar to my picture...remove the upper heater core hose and connect your garden hose to the connector then to the heater hose and secure with a hose clamp. Remove the lower heaer core hose and point it to the gound, then turn on your faucet and run clean water thru it... b67bfc8.jpg

Mar 24, 2009 | 2001 Chevrolet Venture

1 Answer

Bad smell from vent at back of fridge but able to remove back panel


if you cant remove it then wash it unplug the refrigerator from ac outllet first then remove the carton cover in the back and you gona see the pan were the water is temporaly storege with a garden hose washing the pan and then clean the floor use or news paper around the refrigy is helpfull the water or so in the pan is evaporated with the hot of the compresor sistem that water come frome the freeser compartment....good luck and rate me

Jan 11, 2008 | Samsung RS2630SH Side by Side Refrigerator

Not finding what you are looking for?
Danby DPAC7099 Air Conditioner Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Danby Heating & Cooling Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Dennis Boxerman

Level 3 Expert

1070 Answers

mintvl

Level 1 Expert

5 Answers

Are you a Danby Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...