Question about Emerson Televison & Video

1 Answer

I need the codes for an emerson tv vcr combo number vt1920n

Posted by on

  • robert_winso Jun 01, 2010

    The solution was very helpful. Thanks for your help.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

MAy I get the make and model # of the remote you are going to use to get you the codes for the emerson tv

Posted on Jun 01, 2010

  • 2 more comments 
  • robert_winso Jun 01, 2010

    rca universal remote model number rcu404

  • Jyackle5
    Jyackle5 Jun 01, 2010

    Ok please give me a min to get you the codes

  • Jyackle5
    Jyackle5 Jun 01, 2010

    Here are the codes.

    Emerson.............. 001, 003, 005, 006, 008, 009, 010, 011, 017, 018, 030, 047, 049, 050, 052, 054, 056, 068, 069, 070, 077, 089, 096, 097, 098, 099, 100,



    Or you can do a code search by,



    Manual Code Search

    1. Manually turn on the component

    you want the remote to operate.

    2. Press and hold the CODE SEARCH

    key until the indicator light

    illuminates. Then release the

    CODE SEARCH key.

    3. Press and release the component key

    that corresponds to the component

    you want the remote to operate (TV,

    VCR or DBS•CABLE). The indicator

    light blinks once and then remains lit.

    Note: For DVD or AUX, Press

    DVD•AUX, then the component key

    corresponding to the component to be

    stored under the AUX key. For DVD,

    press DVD•AUX, then the VCR key.

    For an auxiliary component, press

    DVD•AUX, then the corresponding

    component key (TV, VCR,

    DBSCABLE).

    4. Aim the remote at the component and

    press the ON•OFF key continuously

    until the component turns off.

    Important: Because there are so many

    codes, you may have to press the

    ON•OFF key many times—possibly

    up to 200 times.

    5. When the component turns off, press

    the ENTER key to store the code.

    6. Use Code Retrieval on the next

    page to identify the code for your

    component for future reference.



    .

  • Jyackle5
    Jyackle5 Jun 01, 2010


    Auto Code Search

    1. Manually turn on the component

    you want the remote to operate.

    2. Press and hold the CODE SEARCH

    key until the indicator light

    illuminates. Then release the CODE

    SEARCH
    key.

    3. Press and release the component key

    that corresponds to the component

    you want the remote to operate (TV,

    VCR
    , or DBS•CABLE). The indicator

    light blinks once and then remains lit.

    Note:
    For DVD or AUX, Press

    DVD•AUX
    , then the component key

    corresponding to the component

    to be stored under the AUX key. For

    DVD, press DVD•AUX, then the VCR

    key. For an auxiliary component,

    press DVD•AUX, then the

    corresponding component key

    (TV, VCR, DBSCABLE).

    4. Aim the remote at the component

    and press the ON•OFF key once.

    The remote automatically sends every

    code for the specified component

    one at a time, with a 3 second delay

    between each code. Keep the remote

    aimed at the component throughout

    the process.

    5. As soon as the component turns

    off, you must press the ENTER key

    immediately so the remote stores

    the correct code. If you don’t press

    ENTER
    within 3 seconds, the remote

    will send the next code in the list, and

    you will have to start over from step 2.

    6. Use Code Retrieval to identify the code

    for your component for future reference.



    Or you can get the manual on the link below. Click on Support and Manuals



    http://www.rcaaccessories.com/Rcaaccesso...




×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Emerson tv;vcr combo, have one for all remote, need code and instruction on setting up new remote


Hello
You haven't specified nothing about the model number or any other descriptions about your Emerson Combo or the remote control you wish to setup with it. Anyway, I hereby posts some codes for Emerson TV/VCR combo. Try with them.
0227 0233 0254 0264
0265 0266 0310 0325 [0039 0252]
Where the code is listed as [### ###] the first is for the TV and the second is for the VCR. Otherwise just the one code operates both the TV and the VCR.
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
OK.

Aug 09, 2011 | Televison & Video

1 Answer

I need the code to program the remote to an emmerson ewf2006 tv codes


Hello
You haven't specified whether it is a TV/DVD combo or TV/VCR combo.
Four digit universal remote codes for Emerson TV/VCR combo are:
0227 0233 0254 0264
0265 0266 0310 0325 [0039 0252]
[0147 0250] [0147 0257]
For TV/DVD combo is: 0456
Where the code is listed as [### ###] the first is for the TV and the second is for the VCR. Otherwise just the one code operates both the TV and the VCR
For Combo Devices, in many cases a single code operates both parts of the device (e.g. the TV and the VCR). In other cases you need to set up two codes. For example, one for the TV and one for the VCR. Where codes are shown below as [### ###] the first code operates the first part of the device's name, and the second code operates the second part. E.G., for a TV/VCR device, the first code operates the TV and the second code operates the VCR

Jun 19, 2011 | Emerson Televison & Video

1 Answer

Please inide code for tv emerson


Hello
You havent specified what type of Emerson combo is yours. Anyway I hereby posts some Emerson combo codes.
TV/VCR
0227 0233 0254 0264
.... 0265 0266 0310 0325 [0039 0252]
Where the code is listed as [### ###] the first is for the TV and the second is for the VCR. Otherwise just the one code operates both the TV and the VCR

TV/DVD combo
0456
TV/VCR/DVD combo
0456 [0458 0227]
DVD/VCR combo
0456 [0458 0227

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Mar 15, 2011 | Emerson Televison & Video

1 Answer

Codes for emerson combo


TV/VCR Combos
Where the code is listed as [### ###] the first is for the TV and the second is
for the VCR. Otherwise just the one code operates both the TV and the VCR.

EMERSON . 0324 0924 0027 0028 0128 0228 0632 0134 [0505 0826] [0316 0626] [0316 0327]

Mar 10, 2009 | Philips PM3S Remote Control

1 Answer

Need code for Emerson TV,DVD,VCR Combo


you can set up any like this
1. turn on what ever you want set up
2. press and hold set up tell light blinks or stays lit
3. push what you are trying to set up t.v. or dvd ect.
4. push power on/off tell it turns off
5. push enter when it turns off
Thank you for useing fixya please rate me

Feb 12, 2009 | RCA Universal Remote 3 Device Remote...

1 Answer

TV code for Emerson EWC 1301 TV/VCR Combo


how do use revmote to program tv vhs thank you11

Jun 15, 2008 | Emerson EWC1304 13 in. TV/VCR Combo

4 Answers

Need code for Emerson TV,DVD,VCR Combo


I don't know if you guys even need this advice anymore, as it's 1-2 years late, but if your universal remote has a VCR setting, the Emerson 13" CRT TV/VCR combo I have operates under that mode.
The code I used was 002. These may also work: 278, 184, 479, 000, 121, 211, 037, 043, 061, 208
Remember, program your remote as if you were setting up a VCR (and NOT a TV). For instance, on my GE universal, I hold the "code search" button down until I get a steady light. I hit VCR, and then I entered 002. Works like a charm.

Mar 25, 2008 | RCA Universal Remote 3 Device Remote...

5 Answers

Admiral tv/vcr, innovage jumbo remote


YOU CAN USE EMERSON CODES FOR YOUR ADMIRAL TV AND TV / VCR COMBOS, MY COMCAST REMOTE ACCEPTED 11911. SOME REMOTES NEED FIVE NUMBERS AND MY ADMIRAL ONLY HAS THREE. SO I USED AN EMERSON CODE AND IT WORKED MOST OF THE BELLS, NOT ALL WHISTLES WORKED BUT I DIDN'T HAVE TO GET UP TO TURN IT ON, CHANGE THE CHANNEL OR THE VOLUME. MY KIDS WON'T DO IT ANY MORE!!
GOOD LUCK!!!!!

Dec 26, 2007 | Televison & Video

5 Answers

Emerson remote for emerson tv/vcr combo


Emerson TV codes 0154, 0236, 0463, 0180, 0178,
0171, 0623
Emerson TV VCR Combos 0479, 1479, 1278



SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5. To lock in the code, press and release SET.The LED will
blink twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
here is the maual for your remote:
http://www.ofausa.com/remote_manual/URC4...

Nov 14, 2007 | One For All URC-3021 Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...