Question about Maytag Neptune MAH5500B Front Load Washer
Maytag had a big problem with the rubber boot in the front of the washer.They redesigned it to drain better so water would not remain in the bottom and get moldy smelling.Open the door and look down in the boot with a flashlight.Make sure if there are drain holes in the bottom that they are clear and not clogged with soape or lint.Put a couple of old towels in the machine and a little soap and twice as much clorine bleach as normal and run a cycle.It should help.It is also good to leave the door opened between washes if possible.
Posted on Jun 01, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 18, 2014 | Washing Machines
Jun 10, 2010 | Kenmore 24902 Top Load Washer
Oct 24, 2009 | Maytag MAH2400A Front Load Washer
Aug 01, 2009 | Kenmore Washing Machines
Mar 06, 2009 | Maytag Washing Machines
Jan 20, 2009 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...
Jan 12, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Aug 17, 2008 | Kenmore Elite 45986 Front Load Washer
Apr 19, 2008 | Washing Machines
221 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: