Question about Hitachi FDX Series 43FDX10B 43" Rear Projection Television

1 Answer

We have a 3D look on our TV, convergence,problem I guess, can I f

We have been having a convergence problem with our t. it is a 2001 43FDX11B V1F000641 , My daughter and I took the back off to see if we can fix it ourselves, no go.. help us?Teri

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 597 Answers

Convergence problem,,find good repair shop

Posted on May 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am getting a blurry picture that kinda makes it look like a 3d movie without the glasses on with alot of blue


The tv have a problems known as a convergence pictures problems.Tv have any colors lines R,G,B mis alignments,tv have any colors shadows pictures or have a 3D pictures look alike?Yes,than the tv convergence board it is the causes and already dead to have many of these convergence pictures problems.The tv convergence board must have to be repair like replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence pictures many problems.The tvs shops will cost u like $300-$350 for parts and labors.

Sep 07, 2011 | Panasonic Televison & Video

1 Answer

Picture looks 3d colors not lining up


The tv have a problems known as a convergence picture problems.That why ur tv colors lines R,G,B are mis alignments,have colors shadow pictures or have 3D pictures look alike?The tv convergence board it is dead.Tv Convergence board must have it parts like 2 STK convergence ICS and some or all of resistors to be replace too.To fixed the tv convergence board to solved tv picture convergence problems.The tvs shops will cost u like $300-350 for parts and labors.

Aug 09, 2011 | Panasonic PT-53WX54 53" Rear Projection...

1 Answer

The picture looks 3D and kind of curving in


The tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignments,have pictures colors shadows or have a 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts on the tv convergence board,must be replaced to solved the tv convergence pictures problems.The shop,will cost u like $300-350 for parts and labors.

Nov 23, 2010 | Sony KP-57WS510 57" Rear Projection HDTV

1 Answer

Screen looks like it is in 3D colors are seperated.


Tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergnce board have dead 2 STK convergence ICS and some or all of it resistors too.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 22, 2010 | Toshiba Televison & Video

1 Answer

The red field on the screen, bends within the image, creating a 3D like effect.


The tv have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alingnment,have colors shadows pictures or 3D pictures.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on the convergence board,require replacing to fix the tv picture convergence problems.The shop,will cost $300-350 for parts and labors.

Oct 19, 2010 | Mitsubishi WS-65712 65" Rear Projection...

1 Answer

Having problems with the red and blue convergence. TV image looks like a 3d screen with out the 3d glasses


The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts must be replaced in the tv convergence board to solved the convergence problems.The shop will cost u $300-350 for parts and labors.

Jul 21, 2010 | Philips 60PP9202 60" Rear Projection...

1 Answer

My tv looks like it is in 3D without 3D glasses,


Projection TV2_bing.gif sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

Convergence problems are very common on all Projection TV sets including Sony, Samsung2_bing.gif, JVC, Philip Magnavox, Panasonic, Akai, Pioneer, Hitachi, Zenith2_bing.gif, and others. You can get a convergenece repair kit from the link below.

Common Symptoms include....
  • Screen looks 3D2_bing.gif
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
  • TV shuts off after powering on - TV may also make a chirping noise.
Here are some photos of convergence problems.

49abec3.jpg
f0add3d.jpg


Here is a quick test....

Using your original remote go-to the settings menu then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move RED and BLUE in all directions - up, down, left, and right.

If you can't move them in all directions or cant move them far enough your convergence chips are bad and should be replaced. This is a common problem.

Note: If you TV has as flash2_bing.gif focus or magic focus button only try pressing the button. If it fails to fix the convergence your need to fix it. See below for a solution

93a1209.pngCONVERGENCE SOLUTION

You will need to replace the convergence chips and possibly some convergence resistors and pico fuses.
This is a a fairly easy DIY job if you know what you are doing. If you have never done this before we would advise calling a shop or if you want to do it yourself get a complete kit with instructions and support from www.TvRepairKits.com

May 15, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

3D Help


There is no generic prob on RCA's. You gave enough of a description though that im guessing its a itc222 chassis (please verify this). If it is you have a very common problem. You must have good soldering skills on this one. Lack of a convergence menu mean that the convergence power supply fuse has blown. Before changing this fuse it is important to reflow the solder on the ihvt, vert. ic. and surrounding components, as this is why the fuse blows. Then replace the fuse fl231.

Jul 11, 2009 | RCA Televison & Video

2 Answers

I cannot get the convergence alignment on my Sony projection TV model number kp-51ws510



Solution: 

Your TV has a convergence problem. Here are some of the most common symptoms.

Screen looks 3D
One or more colors can't be adjusted when using the convergence menu. 
Screen is bowed in or warped.

Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence or magic focus section.

Try to adjust the convergence.

You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.

Its a fairly easy fix. 

You can get a repair kit that includes all the parts from www.TvRepairKits.com. The kit includes a photo instruction guide, original Sanyo STK chips, convergence resistors, etc. 

Everything you need to fix it yourself. 

Aug 01, 2008 | Sony KP-46WT500 46" Rear Projection...

Not finding what you are looking for?
Hitachi FDX Series 43FDX10B 43" Rear Projection Television Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...