Question about Timex Expedition 84601 Wristwatch
You can get instructions from the Timex web site "timex.com".
At the bottom of the screen click on "manuals/downloads", then on "product
Enter your watch type in the search box and click on "search"
Posted on Jun 01, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: setting tha alarm
Press MODE (lower left) button until "ALARM" appears in the display. Then press SET (lower right) button. T1 should flash to indicate you are setting an alarm for Time 1. Press MODE to cycle through the alarm settings. Press ALARM (upper right) button to advance the hours, tens and minutes to the desired time. When the far right of the display is alternately flashing "T1" and then "AL" you can change the chime and alarm tones by pressing the ALARM (upper right) button. The alarm is on if the middle symbol (lines) on the left of the display is shown. The hourly chime is on if the lower symbol (bell) on the left of the display is shown. When you are done, hit MODE (lower left) again to return to normal time display.
Posted on Aug 18, 2008
SOURCE: Timex Expedition alarm beep
good after noon ! maybe the problem of your watch is wrong possition of case back because the speaker or buzzer of your watch is attached on the case back , so open the watch and fix the case back at the correct possition ,!thank you ! god bless !.....
Posted on Aug 29, 2008
Here is the link for all Timex watches and the appropriate manuals.
This should provide you with the information you require, if you have an issue not covered there I will try to find you more specific information.
Posted on May 27, 2009
You will find an arrow head on the outside back of your watch where all the printing is. When you put this lid back on, this arrow needs to be aligned with a notch on the inside edge where the cover goes on. As you are looking at the watch from the back with the cover off this notch is in a northwesterly direction. If you doubt it then just hold the back on without popping it in all the way and hit your mode button to make sure that you hear the beeps again. If you do, then you've found the right spot.
Posted on Oct 24, 2009
Tips for a great answer:
Aug 18, 2016 | Timex Expedition Watches
May 04, 2012 | Timex Expedition Watches
Apr 28, 2011 | Timex T41101 Metal Outdoor Expedition...
Timex has two ways to find information about your particular watch. If you don't have the manual, Try this link:
Complete Timex link site:
Now, look up the model number, or if you cannot find that, check the three-digit Module Number from the back of the watch. Click on it in the Module Table, and download a PDF of your watch setting-instructions/manual.
I hope this helps you. Thanks, Bill
Sep 05, 2010 | Timex Expedition 84601 Wristwatch
Sep 01, 2010 | Watches
Jun 02, 2010 | Timex T41091 Expedition Watch
Sep 14, 2009 | Timex Expedition Adventure Tech Altimeter...
Jul 23, 2009 | Timex Watches
Nov 07, 2007 | Timex Outdoor Camouflage Expedition®...
Jun 21, 2014 | Timex Expedition 84601 Wristwatch
439 people viewed this question
Usually answered in minutes!