Question about HP Photosmart C5180 All-In-One InkJet Printer

1 Answer

Power button just blinks

Returned home after a 4 week trip and tried to turn printer on. The power button just blinks and printer won't turn on.

Posted by on

  • Anonymous Apr 09, 2008

    driver para instalar impresora multifuncional hp photosmart c4280 en linux version kubuntu

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I unplugged the printer and plugged it back in. Printer started up like it should.

Posted on Apr 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung CLP-315 This unit has seen very little use. Perhaps 100 pages. It sat idle for 9 mos. while we were in FL. When I returned home I turned it back on and printed 1 page with it. I thought all was...


It is possible that it reciecved a small power surge while you were gone on your trip, and you need to leave it unpluged from the wall for 40 Min, to clear and reset the operating processor.. It should go back to normal after leaving unpluged, but you might have to run set up program agian too.

Jul 28, 2011 | Samsung CLP 315 Laser Printer

1 Answer

Error#5100 comes on my printer and printer stopes


5100 is a carriage error, check the timing strip for contamination(plastic strip about 1/4" in width)
The unit is not homing, check for obstructions[hitting resume button with power for me]

Reset the printers

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

here is the link for other printers: http://www.cyber-ink.com/member-canon.html

Aug 18, 2010 | Canon Printers & Copiers

1 Answer

On off light blinkinking from green to red and I


Canon IP3000 INK counter reset
Can gave it a go may work

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

Dec 14, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

2 Answers

Hp d1460 wont print test page,wont print from wordpad in windows xp home


1.Turn the printer on
2.Press and Hold down the Power Button.
3. While Holding Down the Power Button, open and Shut the lid of the printer four times.
4.Release the Power button. The self-test prints.

Nov 18, 2009 | HP DeskJet D1460 InkJet Printer

1 Answer

Keeps blinking. I've shut it off, and cancelled all print jobs - even unplugged it. Keeps blinking. Says there is an operator error


Try this:

1. Turn off printer (use button, don't unplug)
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.

If this not help may the print head is defective.

Oct 07, 2009 | Canon BubbleJet i560 InkJet Printer

1 Answer

Error code 5100 and belt that moves ink cartridge is making noise.


hi there....
since u dint specify ur printer model.... iam giving u a generic reset procedure..... first try this
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..


5100 is a Carriage Home Position Error. if the above reset procedure dint help....
try cleaning the plastic strip that runs the length of the carriage, it may be contaminated.
Use alcohol and a swab.
check the timing strip for contamination(plastic strip about 1/4" in width)
The unit is not homing, check for obstructions.
if even after cleaning the strip ur experiencing the problem then u can be rest assured that its time to call canon...
thank you for using Fixya...
have a nice day
Please rate this solution.
iversh


Aug 01, 2009 | Canon Printers & Copiers

1 Answer

My printer is blinking orange lite


Hi there ok try
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jun 18, 2009 | Canon S400 InkJet Printer

1 Answer

Trying to clear memory on HP #D1420


You need to clear the print queue in the printer properties.
go to start >printers and faxes > double click on your printer.
click on the word printer (on the upper left corner),when the window pops up. then scroll down to cancel all documents. This will clear the print queue.

Afterwards, power off the printer and the computer. wait 30 seconds, power up the printer, wait 30 seconds, then power on the computer.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

May 19, 2009 | HP PSC 2410 All-In-One InkJet Printer

1 Answer

Blinking lights and e on start copy


Have you tried re-booting your computer?

Apr 01, 2009 | HP DeskJet F380 All-In-One Printer

1 Answer

Printer will not print


5100 is a carriage error, check the timing strip for contamination(plastic strip about 1/4" in width)
The unit is not homing, check for obstructions

If its still persist follow these steps to reset the printer and it work i hope it will help you in yours.

Reset ip2000 / 3000

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

here is the link for other printers: http://www.cyber-ink.com/member-canon.html

Nov 15, 2008 | Canon PIXMA iP1600 Printer

Not finding what you are looking for?
HP Photosmart C5180 All-In-One InkJet Printer Logo

Related Topics:

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96396 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...