Question about Husqvarna Designer I

2 Answers

My husqvarna sewing machine is running a little crazy. When I embrioder with it,I can only run it for a couple of hours before it makes a squeeking sound then shouts itself off

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 201 Answers

Sorry to disagree, but Husqvarna machines don't get "oiled". You will muck up the pre-set tensions and adjustments if you put oil anywhere in the machine. My suggestion would be to take it in to a serviceman. It sounds like it is overheating, hence shuts itself down. Any unusual noise needs attention by a technician.

Posted on Jun 02, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 40 Answers

Make sure it is clean and well oiled.

Posted on Jun 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No reponse from touch screen when trying to embrioder using embriodery unit and cards


sounds like the card reader is not functioning right or the card reader and the computer are not communicating correctly, I the problem continues, the machine may have to be checked

Apr 04, 2016 | Sewing Machines

1 Answer

Husqvarna 500 sewing machine won't turn on


yes, it's possible. also could be the on/off switch, or the power cord.

Jan 24, 2014 | Husqvarna Sewing Machines

1 Answer

Overlock problems


it would be a good idea to have the machine checked to see what's causing the squeeking problem and what's causing the pedal to get hot.

Dec 02, 2013 | Sewing Machines

1 Answer

Husqvarna Sapphire 870 Quilt Sewing Machine While


Has the take up lever been replaced with the new updated one that does not let the thread slip out?

Oct 08, 2013 | Husqvarna Sewing Machines

1 Answer

Have Viking Husqvarna #1+ sewing machine that when filling a bobbin caused the bobbin to overfill and break. Now when pressing the foot pedal the needle will not move. I can manually turn and get the...


Make sure that the bobbin winder stop is up. That is the little black post below the bobbin winder. If it is pressed down, the machine will not run.

Feb 02, 2010 | Husqvarna Sewing Machines

1 Answer

How do I oil my Janome My Excel 18 w ? My machine has started to make a squeeking sound when sewing .I think it might need oiling but dont know where to put the oil?Can you please help me with this .


Take off all the outside covers you can, then basically put a drop of oil on anything that moves when you turn the machine over by hand. After this run the machine for a couple of minutes with no thread or fabric, you then need to wipe up any excess oil and refit all the covers.

Oct 10, 2009 | Sewing Machines

1 Answer

Husqvarna Viking Model 150 sewing machine does not work


Make sure the bobbin winder isnt engaged this can cause the clutch to engage and the motor will run but the machine wont sew

Jul 05, 2009 | Sewing Machines

1 Answer

Huskystar squeeks when sewing


They occasionally need oiling. You should have received a tube of oil when the machine was purchased. If you don't have any, try to find Tri Flow oil available at bicycle shops or Amazon.com. If you are unable to find it, you can use machine oil but not 3n1 oil. These are excellent machines and I still have mine. It may be well worth having it serviced at an authorized husqvarna viking dealer. You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com

Good luck.

Dec 14, 2008 | Husqvarna Husky 145

1 Answer

Machine stopped running, its getting power but wont run.


Are you sewing or embroidering? If you are embroidering, the machine automatically stops and shows scissors in the window, for you clip the jumpstitch. Then just push the "Run/Stop" button.

Dec 13, 2008 | Husqvarna Rose

3 Answers

Obtaining actual sewing and embroidery hours on machine


To find out the running time of your Des. 1 machine; Switch on machine touch 'SET' on the screen then press ' More' 3 times and you will see' Running time' hours and minutes.

Nov 28, 2007 | Husqvarna Designer I

Not finding what you are looking for?
Sewing Machines Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

179 Answers

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...