Question about Epson Stylus C46 InkJet Printer

1 Answer

Problems changing the inkjets

How do I change the inkjets? I push the button and the inkjets come out but they don't stand there instead they go back to their place again so it's imposible to change! please help me! Sincerely sara

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 202 Answers

Hello Sara

The best way to help you here is to provide you w/ access to the support resources available for this printer. In this way, you can take your time and follow the step-by-step instructions provided by the manufacturer for changing your cartridges, print heads, etc.

It was a bit of a challenge but I did find support resources for your printer on the Epson Europe site. (There is no information regarding this printer on the North America or USA sites.)

Epson Stylus C46 Drivers and Software

Epson Stylus C46 Manuals and Documentation

HERE you can find their online Reference Guide

HERE you can find the FAQs and Trouble-shooting Guide

HERE you can find contact information for Epson support. (There is ONLINE CHAT available here as well.)

HERE you'll find a summary of the resources available for the Stylus C46 on the Epson Europe site.


***************
Please, let me know if this response was a "FixYa"
or "Helpful" for you or, of course, if you have
any additional questions, etc on this topic.

If the information I provided you w/ resolved your
problem or lead you to a resolution for your
problem or an answer to your question, then, a
"FixYa" rating would be most appreciated. @:)

It is best to wait until the problem has been
resolved b4 scoring the experts who participated in
solving your problem or answering your question.
(Once you enter a rating, the problem will be
closed and we will not be able to continue to assist
you.)

Very often it will take more than one exchange of
information between you and an expert in order to
resolve your problem. If a proposed solution
doesn't work for you, don't rate it yet. Instead,
post back here letting us know and we'll continue to
work w/ you until we find a solution that does work
for you.

Thank you
BJ @:)
***************

Posted on Apr 08, 2008

  • B Joan Rapier
    B Joan Rapier Apr 17, 2008

    Hello Sara

    How did it go? Did the information and links I provided you w/ enable you to get your printer cartridges installed OK?

    I DO hope that is the case. :) If it isn't, please, post back here and we'll continue to work w/ you.

    If it is the case, would you kindly take just a moment to close the problem by assigning a FIXYA rating for my "solution"? I would be very grateful for your generosity and show of appreciation.

    Thank you once again for using FixYa! Have a beautiful day.
    BJ @:)

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset check oil light


You mean the change oil light, right ??
If it has a red button on the fuse box, you turn the key on and push the button, the change oil light should flash, then you push the red button until the light goes off.
If you don't have the red button, you turn the key on, push the gas pedal to the floor three or four times, and the light should go off.
The method for your model should be in the back of your owners manual.

Aug 19, 2012 | 2002 Pontiac Grand Am

1 Answer

Doors don't unlock when car is put in park


I believe this is a user settable option(went back to factory default when the battery died).The owners manual would be the place to look!(If you don't have the manual,scour the wrecking yard for a same year/model in a glovebox).You probably have to do some annoying sequence to change this option,most likely you won't figure it out by trial and error(it's usually changed by holding the lock or unlock button while putting in park while standing on your head and *******(hee-hee!) or something stupid like that.

May 26, 2012 | 2002 Toyota Camry

1 Answer

Forgotten how to turn it on. It seems to be set on timer. Oops


push stop button for a few seconds until it beeps or the readout changes. unplug,,,,,plug back in....push "Select" or "menu" button depending on which machine you have....push again and again until the program you want is on the display or readout. Then push the "start" button ....Don't push any timer buttons or arrows!

Dec 04, 2011 | Kitchen Appliances - Others

1 Answer

My Element 40" Tv is stuck in stand by how do I


hi have you changed the batteries in the remote, if the remote is ok there's a fault with the tv, could be a swollen capacitors shorted diode or poor solder joint,or a bad mainboard , thanks

shaun

Mar 08, 2017 | Element ELCHW402 40 in. LCD HDTV

1 Answer

Don't know how to increase the ring volume?


To increase the volume for the ringer, the volume buttons located on the charging stand can adjust the volume. To change the ringer volume on the phone instead of using the stand, go to the menu on the phone and type 1 then 1 again. This will take you to the ringer volume screen. You can select between the options:{1}: Low {2}: Medium {3}: {0}: Off.

May 06, 2011 | Panasonic KX-TG5632 Phone

2 Answers

HOW TO UNLOCK SPEEDSTREAM 6300 ? THANKS


In order to get your router back to the original settings, you must push in the reset button (usually on the back of the router) for somewhere between 10 and 30 seconds depending on the router. You may need a pin or something small to push in the button, because it can be recessed. Once you have reset the router, the username and password will be changed to the defaults, admin and password, respectively. One thing you must remember is that resetting the router will change all of the router settings back to the factory settings. This means you will lose all of the changes you made since you got the router. Make sure to write down any things you've changed, so you can change them back after the reset. Also, I recommend updating to the latest firmware after the reset.
If you need more help post back! Thumbs and testimonial are welcome!

Jan 21, 2011 | Siemens SpeedStream 6300 (33A6300001)...

1 Answer

Hi I have a Cobra 75 WX-ST radio. It is currently displaying radio frequencies instead of channels. How do I correct this.


Push and hold the memory key for 3 seconds to change back to displaying channels instead of frequencies. Do it again and it will go back to frequencies on the display.

If you need anymore help, don't hesitate to email me at rollincbmods@yahoo.com

Dean Pitts
Rollin CBs
Mount Vernon, TX

Jan 06, 2011 | Cobra Radio Communications

3 Answers

Tv will not turn on


Common problem with this set are the two 1000uF@25v capacitors and the 150uF@400v cap on the power supply board.

May 12, 2009 | Apex Digital LD1919 19 in. LCD TV

1 Answer

When i do a full reset the hands go to 2:50 instead of 12


If you are talking about your stopwatchfunction this is probably the solution:

pull out the Crown(the one with which you set your normal clock), Pull it out in the 2nd stand.
Then by pushing the 'start/stop' button --> you change the minutes.
By pushing the 'lap/reset' button --> you change the seconds

It worked for me, took me a few minutes to figure it out, hope this does the trick for you;)

Apr 19, 2009 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

Not finding what you are looking for?
Epson Stylus C46 InkJet Printer Logo

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Cindy Wells

Level 3 Expert

4952 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...