Question about MTX Thunder 251D Car Audio Amplifier

1 Answer

Connection i have 98 toyota camry and i'm trying to connect my mtx 251d thunder and still no light i check my connection is ok , if i do jumper it with the antenna and main power the light is on, i,m getting frustrated

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 84 Answers

My guess is a short in your 12 volt remote turn on wire or you have it wired incorrectly behind the dash. If you're sure you have a good ground and a solid battery wire the only other issue can be your remote wire. Your remote wire is what kicks the amp on and illuminates the power light.

Posted on May 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my MTX thunder 702x amplifier cut on and off


Check fuse on amp under hood. Also, check wire connections makes none of them are loose and move your RCA jacks around to see if you have a short.

Jan 04, 2012 | MTX X Thunder 702X Car Audio Amplifier

1 Answer

Nececito una foto del diagrama ya que unas piesas se quemaron y nose le ven las equivalencias


Hello
I've transilated your language from Spanish to English with Google transilate. Actually i want it to find out the exact equalivalent. OK.

May 13, 2011 | MTX Thunder 251D Car Audio Amplifier

1 Answer

My mtx thunder 6500d amp hums when connected light turns on but no output


Make sure you have a proper ground wire connection. The ground wire should be connected solidly to the vehicle chassis in a paint-free location. If it is loose or there is paint t the connection site, you will have problems with the amp output. Also check the speaker wires to see if they are touching the vehicle chassis. This will cause a short circuit and you will not have output from the amp. Finally, check the leads from the head unit. They should be RCA cables, and should have a good connection to the amp.

Feb 22, 2011 | MTX Thunder 6500D Car Audio Amplifier

1 Answer

How do i wire a mtx 251d at a 2 ohm load


i need more info about the subs ur runnin to help u

May 14, 2010 | MTX Thunder 251D Car Audio Amplifier

1 Answer

MTX Thunder 3401 not responding. Lit but no sound.


turn down music open sub box and put another speaker at wire and check again if work means sub is ok if not check the signal cable, and put there the speaker to try signal

Apr 05, 2010 | MTX Thunder 3401 Car Audio Amplifier

1 Answer

How do i wire a mtx 251d at a 2 ohm load


To wire up a 2 ohm load depends on the subs. You will either need 1 sub rated at 2 ohms or 2 subs at 4 ohms wired in parallel. This website will help.
http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&I=41#results
You can also use 1 dual voice coil sub rated at 4 ohms wiring the same way you would the 2subs at 4 ohms. Good Luck

Mar 25, 2010 | MTX Thunder 251D Car Audio Amplifier

1 Answer

I have a mtx thunder amp. It started cutting in and out, when it did that it would make a loud sharp noise thru the subwoofer and then work fine. after turning my truck off and cutting it back on it would...


WELL, THE BAD NEWS IS THAT IT WILL DEFINITELY NEED TO BE SERVICED, BUT WHEN REINSTALLING IT, MAKE SURE TO HAVE THE SPEAKER CHECKED TO INSURE THAT IT IS NOT FAULT Y, AS IT COULD HAVE A BAD VOICECOIL WHICH CAN PRESENT A SHORT TO THE OUTPUTS OF THE AMPLIFIER RESULTING IN PREMATURE FAILURE. IF IT IS FINE, THEN REINSTALL THE AMPLIFIER AND YOU SHOULD BE OK FROM THERE. ALWAYS KEEP IN MIND THAT ALL POWER CONNECTIONS, ESPECIALLY THE GROUND, SHOULD ALWAYS BE CHECKED TO MAKE SURE THEY ARE 100%. HOPE THIS HELPS AND LET ME KNOW IF YOU NEED FURTHER ASSISTANCE....V

Nov 24, 2009 | MTX Thunder 251D Car Audio Amplifier

2 Answers

Mtx thunder 1501d


yes you can not run amps with your speakers being grounded un ground and then try

Nov 26, 2008 | MTX Thunder 1501D Car Audio Amplifier

1 Answer

Ground Wire Hook-up


MTX has the hookup diagram here: http://www.mtx.com/caraudio/products/manualsQuickInstall/amps/RTP251D_InstallSheet.pdf If you have the original wiring harness, the ground wire is normally black. The amplifier case or chassis is ground connnected on amps I've seen as well.

Aug 06, 2007 | MTX Thunder 251D Car Audio Amplifier

Not finding what you are looking for?
MTX Thunder 251D Car Audio Amplifier Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top MTX Car Audio & Video Experts

Professor_V
Professor_V

Level 2 Expert

92 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a MTX Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...