I bought a san disk memory card for my phone and it came with a big one to where you connect the small one to the big one and the big one to my computer but i cant any where on my computer where you can connect... So where am i suppose to connect it do i have to buy something else?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need to identify the Operating System and version to make it easier for someone to look into this. You might also mention the system brand and model, mainboard make and model for non-name brand. Identify which slot the card is plugged in to.
If it is Windows, does the Hardware see the card ? (Hardware Manager is usually under Properties when you right-click on My Computer).
Check that the card (always power off and unplug the system, I had a neighbor who 'hot swapped' cards in his PC - Oh that guy!) is properly seated (pushed down) and that there is power connected to it (that is a power connector at the rear top edge, right?).
You might also try the card in another PCI slot, in case the one you have used is a problem.
If the card is not recognized, you may need to return it for a replacement. Remember that you wore a grounding strap when you installed it. (nudge nudge wink wink) You followed the installation instructions to the letter.
Does the computer recognize any other USB devices plugged in to the card? (If not, card might be bad). [mice, webcams, flash drives]
Does the drive connect to your slower USB ports (system probably tells you it is a slower port) ? If it works on another USB port, the drive is OK. It is OK to use a different PC to check this because you are checking the drive not the PC here.
The download link for the installation guide did not work for me. I did not see any drivers available for download.
If you have access to the Internet using a LAN cable, then download the Netgear wireless USB adapter to install the driver. After downloading you can remove the LAN cable. You can also save the driver from your laptop to an USB memory stick and then install the driver in your computer with the USB memory stick.
First thing are all the micro-filters installed and in the correct direction? If they are then it sounds like your DSL signal is borderline and when the phone rings it is getting knocked out. If that is the case you will need a tech to come out and test the line.
/* Style Definitions */
mso-padding-alt:0in 5.4pt 0in 5.4pt;
font-family:"Times New Roman";
Your laptop may have problems from
the broken parts or damage to your Windows/OS.1st will check the parts may be
possible the start of problem. This are only two parts, 1st is the memory clean
net connection small feet, 2nd try to fix windows / OS by re-formatting the
Hard Disk with OS CD..Good Luck
Ok, first thing you need to do is, see if you network adapter is enabled ... You can do this in the Device manager. If there even is an adapter ... If there isn't download the drivers for your Ethernet card, put them on a mem stick and just install them on your Vista machine ...