Question about Digital Cameras

1 Answer

Problem opening quick cam

I can install my logitech quick cam, but it has errors. The quick capture will not open, it just goes to a page that says "windows internet explorer cannot display this page". If anyone can help I would really appreciate it. Thank you.

Posted by on

  • 1 more comment 
  • Ramona1026 Apr 08, 2008

    res://MsgLauncherRes.dll/_launchitem

  • Ramona1026 Apr 08, 2008

    res://MsgLauncherRes.dll/_launchitem

  • Darren Perlmutter
    Darren Perlmutter May 11, 2010

    What address is listed in the address bar when IE attempts to open the page?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 78 Answers

Sounds like a faulty version. Redownload the appropriate software here:
http://www.logitech.com/index.cfm/support_downloads/downloads/&cl=us,en

and it should work fine. Good luck.

Posted on Apr 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a very old web cam and i found the numbers 001612-00000 and i need the driver software. So could you tell me what the name of the web cam is?


This driver was for windows ME.  I do not know if it will work on your operating system
From what I can find that video camera was manufactured by DEXXA. 
Try this LINK

Download automatically opens when you go to the page.  It is hosted by driverguide.com

Includes support for these devices:
DEXXA USB Camera (Web) 0.0.0.0 (09/02/2000) Logitech
DEXXA USB Camera (Pro 3000) 0.0.0.0 (09/02/2000) Logitech
DEXXA USB Camera (Traveler) 0.0.0.0 (09/02/2000) Logitech
DEXXA Traveler (Still Camera) 0.0.0.0 (09/11/2000) Logitech
DEXXA Web 0.0.0.0 (10/25/2000) Logitech
DEXXA Webcam 0.0.0.0 (10/25/2000) Logitech
DEXXA Pro USB 0.0.0.0 (10/25/2000) Logitech
DEXXA Pro 3000 0.0.0.0 (10/25/2000) Logitech
DEXXA Traveler 0.0.0.0 (10/25/2000) Logitech
DEXXA Traveler (Still Camera) 0.0.0.0 (09/11/2000) Logitech

Jul 19, 2011 | Logitech Digital Cameras

1 Answer

I bought the Frontech Diamond webcam and installed the CD and the message shows its successfully installed, as its requested i restarted my system. After i open my cam,, the light will ON but in the CAM...


check if your USB cable is properly plugged.
Also try connecting your webcam directly to your PC instead of through a USB hub

if your webcam's image is not sharp, check to see if it has a focus ring. A blurry image can sometimes simply mean the webcam is not in focus. Adjusting the focus through the ring can solve that problem.

Other picture quality problems with webcams can be addressed by changing the video capture properties for the webcam. Most programs that can use a webcam will have an option to access the properties of the video source, which will bring up the video capture properties window.


raja007007.jpg

Feb 13, 2011 | Digital Cameras

1 Answer

When I open my cam for capture it says LENS ERROR RESTART CAMERA then I restart it never works still the LENS ERROR RESTART CAMERA. what will i do?thanks


The possibility that your camera has encountered a fault in the auto focus mechanism is doubtful. Try to remove the battery and test the voltage. clean the terminals, look for dirt in the lens area - possible sand locked in- use a good air jet to clean.If the fault stays then it will be necessary to open the camera to probe into which may require experience. So have it checked at the canaon service centre for an estimate and decide. if you have a known friend get his help to open and look into this section for resetting the mechanism. if not the electronics could be defective. take a decision based on this opinion. Good day

Aug 14, 2010 | Canon Digital Cameras

2 Answers

Nikon Capture NX will not open black and white jpegs


Nikon Capture when initially installed you have to tell it what types of files to open.... IT has 3 tick boxes for NEF (Nikon Raw Files), TIFF, & JPEg, you actually have to tell it which types you want NX to open. The easiest way to fix the problem maybe to reinstall the program and reset the file association as you install it. Hope this may  help.

Jul 26, 2009 | Nikon D40 Digital Camera with G-II 18-55mm...

2 Answers

Web cam


Greetings rickvalliere,

You can try to use this link to find the drivers you need:

http://www.logitech.com/index.cfm/support_downloads/downloads/&cl=us,en

I hope this helps.

Thank you,

Dorothy
Go Ahead. Use Us.

May 07, 2008 | Digital Cameras

1 Answer

I have a logitech click smart 420, my commputer is microsoft vista, the camera won't down load


I Have The Logitech ClickSmart 310 And Came Across The Same Problem.Here Is What I Did;
I Installed Drivers For Logitech Quick Cam v11.7 It Works Fine.No Audio Im Not Sure If This Will Work On The 420 But Is Worth A Shot Huh?

May 03, 2008 | Logitech Digital Cameras

1 Answer

I have purchased a Logitech quick cam 10.0a and i installed it but when i connect the cam i am getting an error saying that the software has not passed windows logo testing, could someone please help me,...


Hello, Sometimes it is best to go to the manufacture web site and download and install the latest software and drivers.Here is a link, do a search for model number. Hope this helps.
http://www.logitech.com/index.cfm/support_downloads/downloads/&cl=us,en

Mar 24, 2008 | Digital Cameras

Not finding what you are looking for?
Digital Cameras Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digital Cameras Experts

kakima

Level 3 Expert

96518 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...