Question about Microsoft Windows XP Home Edition

1 Answer

My pc keeps mostly open in safe mode however after several attempts it may open in normal mode. A error message appear RUNDLL stating that "the specified module couldnot be found. How can i solve this?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 99 Answers

Your system file is missing due to some reasons like virus, accidently deleted by users or any program or even it can be removed by transformer pack and you have uninstalled it, etc... Just insert the operating system instalation disk and follow the instrustion of it. In it when it prompt for repair just repair it. Do this with care as it may format your any drive if not know properly. I also suggest you to backup your full system or an important documents along with os into any removable drive so that you can restore at any time.

Posted on May 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my window update i get error code 663


Click start control panel administrative tools computer management then select event viewer this may vary depending on what operating system you have

extend the events there you will see errors in red you will no what exactly what the error was and at what time it occured

or click start type in event viewer press ENTER

you might be able work your way through the problem

The 633 error is a connection problem that appears every time you try to use the modem on your computer.

It states "modem is already in use" and prevents you from accessing the Internet.


This problem mostly appears when a device with incompatible drivers has conflicts with the modem driver on your computer system.


The major software that causes this error is the Palm Pilot Software.

With some simple troubleshooting steps, resolve this modem communication error.


Shut down all currently running applications and restart your computer.

Press "F8" repeatedly before Windows begins to open the Windows Advanced Options Menu.


Scroll down and select "Safe Mode." Press "Enter" to log into Windows Safe Mode.

Safe Mode is used for troubleshooting and repairing system components.


Click the Windows "Start" button and select the "Control Panel."

Double-click "Add or Remove Programs" to open the programs window.


Click "Program and Features" (Windows Vista users) and select "Uninstall a Program" to open the programs window.


Click the incompatible software (e.g., Palm Desktop and Synchronization Software) and select "Change/Remove."


Click "Yes" to confirm and uninstall the program from your computer.


Restart your computer normally to complete the process.


Hope this helps




Nov 13, 2012 | HP Pavilion A6400f Desktop PC, Refurbished

3 Answers

Received 512 - chassis fan error on HP Compaq dc5100 ff - I replaced the front chassis fan after detecting fan was not working now when I attempt to log into windows - windows screen appears than...


By enforcing the option to return BACK TO THE LAST KNOWN GOOD CONFIGURATION you have nothing to lose. Respond if you have already selected that option with no success?
Bruce

Jan 12, 2011 | HP Computers & Internet

1 Answer

It gives messsage for dll missing.


From what i have read, this is malware, a trojan.
You need to get rid of it.
Run a program like Malwarebytes in safe mode (F8 on boot, choose safe mode with networking) also run with system restore OFF, lots of malware and viruses hide there.
Follow this guide....
http://www.fixya.com/support/r5272277-secure_clean_computers

Jul 27, 2010 | Microsoft Windows Vista Ultimate with SP1...

1 Answer

Blue screen of death. unable to download drivers. can not get to safe mode. cannot reload orperating system disks.


First off, note down all relevant information when you see a BSOD flash across the screen. This includes the error number and friendly name from the 'bugcheck' section of the stop error (see above), and any file names specified in the 'driver information' section.
If the BSOD comes up on the screen for a split-second before the PC restarts and wipes all the useful information away, we need to change some settings within WinXP. In most cases, it should be possible to stop your PC from automatically restarting when it develops a major error, allowing you enough time to jot down the BSOD error message. If you are using WindowsXP, right click on my computer > Properties > Select the 'Advanced' tab > and under 'startup and recovery' click the 'settings' button. This will open a new window, and under the 'System Failure' heading, uncheck 'Automatically restart.' Continuing on, attempt to restart the computer normally into Windows. If the BSOD occurred while booting Windows, you may be taken to a troubleshooting menu and will have to select 'attempt to start Windows normally.' If your computer starts correctly, continue using it and store the error information for later reference. If the BSOD reoccurs at random or irregular periods, see Section D below on troubleshooting intermittent stop errors.
If your system does not start correctly or the stop message happens again, reboot the system. When the POST (memory checking) screen comes up, press F8 repeatedly. This will bring you to the Windows advanced options menu.
In the Windows advanced options menu choose 'safe mode' to attempt to boot into Windows Safe mode. Safe mode loads Windows XP with a minimal set of drivers and no automatically loaded software. If faulty software or drivers are causing your BSOD problem, safe mode should load correctly. If safe mode loads correctly, refer to Section A below on 'troubleshooting software stop messages.'
If safe mode does not load correctly, and/or you get the same stop message upon attempting safe mode, it's time to try the 'restore last known good configuration' option in the advanced options menu.
Restart your computer, pressing 'F8' again to load the advanced options menu and select 'last known good configuration (your most recent settings that worked).' This uses Windows XP's built in system restore utility to restore the most recent save point, which should be the last time you installed any drivers or other software. If your system boots normally after this operation, hopefully your problem has been fixed.
If you are still receiving a Blue Screen Of Death after the above procedures, or if system restore was disabled on your system, note down any new information on the error and start thinking. Did you install any new hardware or software just before this problem occurred? The driver information section of the BSOD may help with this.
If you did install new hardware or software, and you think you know what it might be that is causing the problem, this gives you a big boost in resolving the situation.
Otherwise, proceed to the advanced troubleshooting sections below. Chances are your error is hardware or system file based and will require more effort to repair.
Specific Repair Instructions
If you have a reoccurring Blue Screen Of Death or crashing problem, and can't use Windows effectively because of it, it's time to look at more specific methods of troubleshooting your problem. Depending on the results of the basic troubleshooting steps above, you should have a good idea of whether the problem that is causing the stop messages is related to software or drivers you have installed, or is a hardware or system file issue.
Essentially, if you can't boot into Windows XP safe mode because of crashes or Blue Screens Of Death, you likely either have a hardware error or one or more essential system files is corrupted or missing. If you can boot into Windows XP safe mode, but get constant or frequent BSOD's when running XP normally, you have a software or device driver problem.

Make sure that if you added any RAM to your computer which is a common cause for BSOD that you added the correct RAM for your computer and that it is equally distributed in the ports meaning each port for the RAM has the equal amount of RAM on each side (eg, one stick 1GB, and the other has 1GB, etc).

Jan 03, 2010 | Dell Dimension 2400 PC Desktop

2 Answers

Trojan Horses PSW.Generic7.APIQ, Win32, etc.


Hi,

Boot into safe mode and go to your control panel > add or remove problem and delete the virus as a program on your pc.

After that please restore your computer to an earlier time when it worked bettrt.
KInd Regards

Nov 09, 2009 | Microsoft Windows XP Home Edition

1 Answer

Windows will not boot on acer 5315 notebook


As the unit will not boot at, i am afraid you are going to have to do a recovery which will also wipe any data on the notebook.
To run a recovery make sure it is powered off then power on, as soon as you power on you must tap the left Alt + F10 keys together at the same time, now timing is important and can take several attempts before you enter the recovery manager. Keep tapping the keys at approx every half a second or so and wait for a message at the bottom of the screen which will state " Windows is loading files" then you can stop tapping. A new screen may appear after that which will state " edit windows boot options: for windows setup or it may say acer e-recovery" if this screen appears then simply press the enter key, you will then enter the Acer e-recovery manager which will then ask you "How would you like to restore?" select the first option for a factory default reset, hope this helps.

Sharky

Jul 05, 2009 | Acer Aspire 5315 Notebook

2 Answers

Computer will not boot up. I have tried to boot up in safe mode, normal, safe mode with prompt command...nothing works, just goes back to the normal start up screen and keeps doing the normal start up over...


It looks like you're encountering an endless reboot? Here's what to do to find the actual error message.

  1. Turn on the computer, and press F8 after the POST screen but before Windows attempts to start to access the advanced startup options.
  2. Select "Disable Automatic Restart On System Failure" and press Enter.
You should now get a blue screen with an error message and error codes. Please write these codes down and report back.

Mar 24, 2009 | HP Compaq Presario SR1830NX PC Desktop

1 Answer

Hello... My Windows XP has the following registry failure (c:0000218) I've attempted to boot up my Avanquest Systems Suite 8 Rescue disk, but it has failed. I can't get into safe mode, etc. Thanks, Paul


Sorry to hear about your trouble. From the error you stated, it seems your SR got corrupted (common with norton/symantec products). The best bet is to try System Restore from Safe Mode.

As for your second problem, here is an alternate way to access Safe Mode (I am assuming you can get into Normal Mode):
  1. Go to START, then RUN
  2. type "msconfig" and hit enter
  3. the system configuration window will appear
  4. among the several tabs across the top, one of them will say "boot.ini", click this tab
  5. there will be a box that you can check next to Safe Mode.
  6. Click Apply, then OK
  7. Restart
  8. Keep in mind that your computer will automaticall go in to safe mode until you uncheck this box.
Good luck and keep us updated!
TJ

Nov 30, 2008 | Avanquest System Suite 8: Windows

Not finding what you are looking for?
Microsoft Windows XP Home Edition Logo

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2839 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...