I cant find my password for my network someone please help me! I have a Netgear from comcast.

You will need to reconfigure your extender, check the manual or online at the link bellow.
Since your extender is not working your range is diminished.
WiFi Range Extenders

It can only be bypassed by making a physical LAN connection from a computer to the router, logging into the router using your browser, and removing the WEP/WPA password protection on the wireless. WARNING....this action will leave your wireless network unsecured and vulnerable to unauthorized connections. You would be better served to just change the password while on the router rather than to disable it. Then you can keep your security while still having the password to connect your own devices.

You need to configure your router with wireless encryption.

Connect a LAN cable from the Netgear to the LAN port on your computer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the default admin password and configure the wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Presumably, you have configured your wireless router:
* SSID (your "network name")
* encryption-level ('WPA' or higher security)
* password for your network

With that information, any wireless device (iPod Touch, iPhone, NetGear wireless adapter) should be able to connect to your wireless router.

> conflict with connection

Exactly what error-message are you getting?

Please see http://kb.netgear.com/app/answers/detail/a_id/111/c/3/p/15,21,164,222,,/r_id/100109 for instructions.

if its comcast equipment that is not working and they are charging you for that service call them , they have to send a tech out to fix free of charge.
i am a senior tech at a nationwide cable provider.

hi
the key code is the security code or the password that is enabled in the router,are you trying to connect to you own comcast network or to someone elses??
if you are conecting to your own comcast network then you need to log into the computer which can go online using you comcast box,once you are in that computer you need to go ahead and click on start,run in the box type in cmd and hit enter,it shud open a black box for you in this black box go ahead and check the default gateway an example of default gateway wud be like this no 192.168.1.1,make a note of the default gateway and open an internet explorer page now type the default gateway in the address box without http,it shud open the router page for you from comcast,it will tell you to put in the user name and password,the default for comcast is username is comcast and password is 1234 incase you cannot login you can contact comcast so that they can reset the password for you,once you are in this page you will see the wireless setting click on it and there you will see something wghich says wireless security or wep key or authentication key that is the key code..u can now use this key code to connect to the network....
if you are trying to conect to someone elses network thent he person who has setup the wireles comcast network will be able to give you the network key...

vedhick

1. Please open any web browser like Internet Explorer or Netscape Navigator.
2. Connect to the router by typing http://routerlogin.com/basicsetting.htm or http://192.168.1.1 in the address field and click Enter or Return key.
3. A window will prompt for a user name and password. The default username is "admin" and the default password is "password".

Note: If it does not take password as the password, you might have changed it when you have run the NETGEAR Setup CD so please try other passwords. If you cannot remember the password, you need to reset the router and run the Setup CD to reconfigure it.

4. Click the Wireless Settings under Advanced tab.
5. Check the box under Enable Wireless Router Radio and Enable Wireless SSID Broadcast.
6. Click the Wireless Settings under Setup.
7. Change Channel (recommended are 1, 6 and 11).
8. Change the SSID to uniquely identify your network. You might have a similar SSID with your neighbor.

Note: Do not change the SSID if there are already other wireless computers that can connect to the network.

Other factors that you may consider when you are not able to view any available wireless network:

a. Switch for the wireless adapter is turned off
b. Distance between the wireless router and computer
c. Possible wireless interferences

I encountered the same problem, with the same modem and also Comcast, and here's what wound up working for me, after time spent with a nice guy on the Netgear customer support line:

1. Log into router: http://192.168.0.1 (or 192.168.1.1) - user: admin / password: password

2. Under Maintenance, click Router Status. If IP Address is listed as 0.0.0.0, there's your problem-- router isn't getting address from modem.

3. At bottom of Basic Settings, under Router MAC Address, change selection from Use Default Address to Use Computer MAC Address.

4. Click Apply.

5. Click Router Status again-- non-blank IP address should now be listed.

6. Basic Settings will now show MAC address under Use This MAC Address. See if you can get online now. I could, and I hope you can, too!

Key 1 should work in most cases. If you have additional keys listed, try them also.
If none work, turn off encryption and connect your new device, then create a new password.
The manual page is here:
http://kbserver.netgear.com/kb_web_files/n101675.asp