Question about Canon PIXMA MP240 All-In-One InkJet Printer

1 Answer

Won't print. says there is a paper jam but there isn't. Alarm light is on. Alternating flashing 3 and E.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,561 Answers

Hello,

Fan the paper to remove any accumulated paper dust and dirt. Remove any wrinkled or torn paper then reload the tray.

Clean the paper tray to remove any dust or debris. If the paper tray is dirty it could cause problems with the paper feed.

Replace the paper in the tray with freshly purchased paper. If the paper has been stored in a cold location, it may have accumulated moisture, and that moisture could cause the paper to stick together. If your Pixma printer is pulling more than one sheet at a time there is a good chance excess moisture is to blame.

If this did not solve the problem, uninstall the printer driver and re-install back after uninstalling and ensure you restart your system during this process before using to try to print again to see if it fix the problem.

Take care.

Posted on May 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont print ready light and alarm light flashing


When the printer "Ready" and "Alarm" LEDs flash as shown, please check the following points:
1.Paper Jam: Clear the paper jam referring to "How do I clear paper jams?"
If the printer does not automatically resume printing, press the control panel button.
2.No Paper/ Misfeed:
-The paper cassette may be out of paper or not properly installed.
-If it is empty, load a new stack of paper into the paper cassette.
-If there is paper in the paper cassette, make sure it is straight.
-If the paper is curled, straighten it before printing. Sometimes it is helpful to remove the paper, turn the stack over and put it back in the paper cassette.
-Reduce the amount of paper in the paper cassette, and then try again.
-Make sure you use paper that meets Brother's recommended paper specifications.
-Reinstall the paper properly, and then press the control panel button. The printer will start printing again.

Dec 06, 2010 | Brother HL 1430 Laser Printer

1 Answer

Both lights are blinking and will not print


they call that flash codes or error codes. please count
count how many times the lights flash, here is what they mean

Alarm / Power light flashes orange 7 times consecutively (ink cartridge installed incorrectly)

Alarm / Power light flashes orange 5 times consecutively (Print Head Error)

Alarm / Power light flashes orange 4 times consecutively (Out of Ink Error)


Alarm / Power light flashes orange 3 times consecutively (Paper Jam Error / Cover Error)

Alarm / Power light flashes orange 2 times consecutively (Load Paper / Paper Feed Error)

Alarm / Power light flashes orange 16 times consecutively (This FINE Cartridge has previously been used)

Alarm / Power light flashes orange 15 times consecutively (FINE cartridge not recognized)

Sep 20, 2009 | Canon Pixma iP2600 Photo InkJet Printer

1 Answer

Brother HL-1440 LASER PRINTER requires ''Service Call A''.


currently, the error you have is not a service errorl, ready and alarm blink means that you have either a paper jam, no paper, or a paper misfeed.

do you get this error only when you try to print?
according to the service manual the lights can not alternate in blinking.

May 30, 2009 | Brother HL 1440 Laser Printer

1 Answer

Alarm/error and paper jam when not jammed


Power up printer,then press & hold (STOP/RESET)button for 5 sec. Then restart printer.I think it fix your problem.

May 11, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Alarm light is flashing and can not print


Hi
Error 6A00
The 6A00 is a Canon generic code for paper path jam.

Solution 1:
Move the printhead carriage back and forth a few times.

Solution 2:
Check the purge unit: Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like.

Solution 3:
Press the ink pads down in the purge unit.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Nov 12, 2008 | Canon MP830 All-In-One Printer

1 Answer

Laser Printer HL-1440


Hi , The error message your getting refers to the following for the Ready & Alarm Buttons Flashing.

1. Paper Jam
2. Misfeed
3. No Paper

I hope this helps!!

Dec 05, 2007 | Brother HL 1440 Laser Printer

Not finding what you are looking for?
Canon PIXMA MP240 All-In-One InkJet Printer Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1921 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...