I need driver

1st You download Webcam Driver.
INSTALAR MI CAMARA After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Ezonics Camera Drivers for Windows XP Vista Windows 7

1st You download Webcam Driver.
Mi camera Installer After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Ezonics Camera Drivers for Windows XP Vista Windows 7

1st You download Webcam Driver.
instalar mi camara web ezonics
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

el conductor debe estar en el disco que viene con la cámara. si no tiene un disco, el sitio Web del fabricante para que

kolke webcam drivers C004
gracias

necesito el drivers de mi camara

The wires came loose out of the camera.....where do they go on the circuit board red, white, green, blue and black. Can I solder them back on, I have it open - where do they go?

Thank you!

tengo el archivo en *.rar
puedo enviarlo como archivo adjunto a donde me lo pidas. a mi me paso lo mismo.
i have file in *.rar archive, i has te same porblem and someone helpme.

ok here the site for your driverGe Easycam Driver

Unfortunately this cam is no longer supported, you are best trying some of these drivers, as they may be similair to the drivers your camera requires http://www.dlink.co.uk/?go=jN7uAYLx/oIJaWVTAL0ZU93ygJVYLelXSNvhLPG3yVjoUYppxu5vbMYkOfsxsXg6VHqqnHtD85pJVJ23gKHtOQ5A8ruEbIq3DNG5/jQDkMVLFP8=