Question about Dishwashers

1 Answer

I have a whirlpool model GU980SCGT2. There will

I have a whirlpool model GU980SCGT2. There will be water in the tub after wash cycle. I have made sure that the drain hose is not blocked. The tub will not have water in it if I press the "cancel/drain" control. I have tried three different wash cycle. Looking for suggestions Thanks in advance

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 523 Answers

Bake sure the water is not back water, in other words make sure your drain under the sink is high.if it is take it off and put into a drain in a bucket see if the water comes out freely

Posted on May 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I take the whirlpool washer cabnet off?


Earlier whirlpool tubs had 4 screws under rubber plugs that unfortunately rusted if you manage to get them out then the complete top lifts of the base section
later models just prise apart as they have eliminated the screws
there are manuals on line to download

Apr 09, 2015 | Whirlpool Washing Machines

1 Answer

I have a Whirlpool LHA 5700 old school washer. It works great. It wash clothes with no problems. It just stop spinning the water out tub and clothes. The water drains as far as it can but that's it. W


Don't know the model but with the old basics with electric motor drive as a 1st step always check for broken wires to the motor as they flop around a fair bit and eventually break them or corrode them from water and washing detergents.

Apr 19, 2014 | Whirlpool Washing Machines

1 Answer

Washer sticks on wash cycle; runs continuosly on spin cycle


That sounds like you have one of them fancy water saving outfits with a diverter valve that dumps the pump water continuosly over the clothes. Weirdest washer I ever saw. Could be the solenoid that opens the drain pump has failed. Don't know too much about em but I do have the service manual. Post your model number for a more precise answer. Whirlpool Catalyst washer manual

Apr 24, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore model # 110.244222300, Won't automatically complete wash


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.#######) and you'll see a list of major sub-components with diagrams and parts.

Following is a Whirlpool / Kenmore service manual for top load, direct drive washers.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf

Initial thoughts are that the Timer is worn / broken.

Here is a description of how to gain access to the console on these washers where you may be able to test the timer. (See the Whirlpool service manual for testing)

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=131



Jan 19, 2010 | Kenmore Washing Machines

1 Answer

Washer stops after the tub fills, agitator and tub do not spin


Your lid switch is bad. If you give model number I can give you the part number you need.

May 18, 2009 | Whirlpool Washing Machines

1 Answer

Gentle cycle did not complete leaving water standing in the tub.


Whirlpool downloader washer model number GHW9150PWO
PROBLEM Gentle cycle did not complete leaving water standing in the tub

Mar 07, 2009 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Brad Brown

Level 3 Expert

16037 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...