Question about Linksys WUSB300N Wireless Adapter

2 Answers

Cannot access website

I have always been able to access my banking website. They changed their website address. Since they did I have a hard time getting in. When I do (rarely) I can only stay on for about a minute and then lose my internet connection. I have to repair my adapter and then I am able to get back on the internet. My desktop has the wireless adapter. My husband has the router. He doesnt have a problem getting on the bank website only I have the problem. When I am unable I get a white screen for a bit and then I page comes up stating unable to access the page. It states a few reasons which none of them apply. One is website is unavailable (hubby can get on), no internet connection (not true cause I can cannot to any other website). So any ideas? No one seems to know why. Thanks!

Posted by on

  • happy1240 Apr 08, 2008

    Sory this is a duplicate post. It said I wasnt logged in when I posted the first one so I reposted. Sorry.

  • happy1240 Apr 10, 2008

    II finally fixed it! I went to java and changed some settings there and then I went into internet options and clicked a few there and then when I went to the site a box popped up and I had to install a new certificate. Waaaalllla fixed. I can get on the website now!

×

2 Answers

Tried the other browser (internet explorer) and didnt help. I did the firewall and disabled it and nothing. Thanks for trying!

Posted on Apr 09, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 293 Answers

Try to use other browser, check also your firewall try to disable it,and if you have an antivirus which is maybe not updated try to disable it also.
i hope it helps...

Posted on Apr 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mad catz wireless adapter


It's an adapter for xbox. There don't appear to be any drivers for Windows or Mac OS.

Feb 11, 2014 | Network & Wireless Adapters

1 Answer

I am unable to access my blitzz bwp611 router. I have tried 192.168.1.254 and 192.168.0.1 to no avail. How can I gain access to this router?


The router should be accessible from the Default Gateway IP Address of your network. Examples I have found are like this:
http://portforward.com/english/routers/port_forwarding/Blitzz/BWA611/Command_and_Conquer_Red_Alert_Counterstrike.htm
you can check you default gateway by opening a command window (Start CMD, right click CMD on the Menu for Vista/7, Start, run cmd for XP) on the command line type IPCONFIG
This will give you your IP address, Subnet Mask and Default Gateway IP address. Type the Default Gateway IP address in to you address line of the browser, you should get a sign in prompt. Unless you changed the default settings, the username and password should be left blank. That should give you access.

Jul 10, 2011 | Blitzz Technology (BWP712) 802.11g/b...

1 Answer

I am not sure on how to hook this up to the router, what wire do i use i am really lost please help


Wireless Router settings:


It is usually easiest to run the install wizard, which you can get from the manufacturers' website, usually for free, but be sure to be ready to set the items listed below:


To get access, start your browser, and put 192.168.1.1 or 192.168.0.1, or other address for your unit, into the ADDRESS bar (not search box) of your Internet Browser. Every unit has unique access login and passwords, some are admin with no password, some are admin and admin...seek access information from the website of the manufacturer of your unit. Look under support, downloads, drivers or similar sounding areas.


Things to set:


(Note: Routers are intended to be set by geeks. You have to SAVE EVERY page before you leave it, or the changes will be lost. A geek knows this (apparently). The router gives no protest...just dumps your changes. SAVE OFTEN.)

1. Login password (RECORD THIS!!). Consider taping to bottom of the router. Physical access is typically NOT the security issue.

2. Set a recognizable system ID (descriptive name is easier to find when you need to connect wirelessly).

3. Invoke wireless security of at least WEP.

a. Assign your own access code, 10 digit home or cell #. Consider taping this information to bottom of the router. (Physical access is usually not the security issue.)

4. Check that your router is set to broadcast its' presence.

5. Change the channel of the wireless to 11, and avoid conflict with landline cordless phones. (Big issue, even the neighbors can interrupt).


There are more secure settings available, all the way down to only allowing certain MAC addresses to have access. A MAC address is a digit unique to each and every network card. Like a fingerprint. Most users do not set mac address limits.

May 14, 2011 | EnGenius 802.11g Outdoor high Power 200mW...

1 Answer

Roku unit hooked to tv by hdline anto the router anpluged in where is the roku code link .why is it so hard to enter the code


The first thing it asks after hooking it up like you did... is to set the date and time (automatically set to Eastern Standard Time), followed by registering the box on the Roku website.
You need access to a computer and log on to their website to complete setting up this device and adding channels to it.
Registration on the Roku website is pretty easy requiring a valid email address. It also requires credit card information or a PayPal account to keep on file just in case you ever subscribe to paid channels. I used my PayPal account for this. There is no additional charge to register.

May 03, 2011 | ASUS Network & Wireless Adapters

1 Answer

Trying to configure my wireless n adapter from tivo i have connected my adapter to my desktop with the ethernet cable but cannot get the website i was instructed to go to for the setup wizard the sie is...


I hate it when manuals do that, its not always that address.
Ok, (I am assuming you run windows here)
In the start menu, open "run" (or hit windows key + R)
in the run box type "cmd" and hit enter
in the black window that pops up type "ipconfig" and hit enter
now providing you are connected to the router, the address listed as "default gateway" is the one you will need to put into the browser to access its configuration.

Oct 31, 2010 | Tivo AN0100 Wireless N Network Adapter...

2 Answers

How to get the ip adress from a linksys rtp300 phone adapter


I'm not sure if your asking for the IP ADDRESS of your Linksys or the DEFAULT GATEWAY of that device because your router's ip address will be provided by your server or Internet Service Provider (ISP) depending on your service. There are two ways of obtaining an ip address first will be DYNAMIC, where your ip address changes all the time and STATIC where you are given specific ip addresses for example 192.168.0.1 -to 192.168.0.25. The easiest way to obtain those ip addresses, by the way, is to contact your Internet Service Provider (ISP)
example: AT&T, Roadrunner, Time Warner, etc....

But, if your looking for the DEFAULT GATEWAY for you to access your router's configuration, most of the time it is found underneath the router itself. For Linksys the Default Gateway is 192.168.1.1

>I hope i helped you out with this... Enjoy!

Sep 15, 2010 | Linksys VOIP PHONE ADAPTER 2-PORT (PAP2NA)...

1 Answer

Can't get Madcatz WGA configured with my Apple MacBook.


Are you hardwired to the router? The IP method for changing base settings wont work unless you are the hard wire connected computer.

Plug in your laptop and try again.

Jun 29, 2010 | Mad Catz Wireless Network Adapter 54Mbps ...

1 Answer

My internet access is unsecure


Hi

You dont need to change your default SSID settings. if youre using a belking router you can access iuts admin graphic page by opening browser >on the address bar: type in 192.168.2.1 > and check your wireless settings re security .

note: check your default gateway by going to run > cmd > ipconfig /all and hit enter

There youl find your default gateway
The def gateweay is your routers IP address .

Type that on your address bar to access your belkin

Let me know if this help.Keep me posted

Cheers.

Jun 18, 2008 | Belkin (F5D7050) 802.11a/g/b Wireless...

1 Answer

I can't reach my ip to change my lan config


yeahlife,

The default IP Address for Linksys routers is 192.168.1.1. You may want to try accessing your router's configuration by typing this IP Address in your browser.
If you have any additional troubles, please let me know.

Regards,

moriarti5

Jun 02, 2008 | Linksys 2.4 GHz 802.11b Wireless - B PCI...

2 Answers

Website failure


try to use another browser, reformat and reinstall your windows.

Apr 08, 2008 | Linksys WUSB300N Wireless Adapter

Not finding what you are looking for?
Linksys WUSB300N Wireless Adapter Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

Are you a Linksys Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...