Question about Kenmore 24 in. 15193 Stainless Steel Built-in Dishwasher

1 Answer

It wont wash the top of my dishes

I have a kenmoore elite
type 5770
model 665 1759 3202
I have this thing repaired every month. The guy comes and says I have to clean my dishes more. I do that but it doenst matter. I just took it apart after remembering how he did it. Once he cleans the blade n filter it seems better. Well I cant find the blade. I think he didnt put it back on. Where would it be I took off three layers and there is water on the bottome just sitting there.
Thanku

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 949 Answers

Hi,

If he left the blade and filter off this will cause the the spray arms to get plugged up with residue. Check the holes in the spray arms to make sure they are clear. The link below will show in detail how he took this apart and where you will find the screen and blade.

You should not have to pre wash your dishes, if everything is cleaned and working right in this machine all you should have to do is scrape and load.

Cleaning the sump

Posted on May 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Managemylife com sears


Bought a new Whirlpool dish washer from Sears. Can I take the drain hose off the hanger and install to my sewer system. Does drain hose need to be elevated to operate properly?

Jan 01, 2014 | Computers & Internet

1 Answer

Kenmore model 665


Power off, check for clogs and if water supply to arm ok. Remove any build ups and reconnect. Good Luck.

Jul 23, 2013 | Dishwashers

1 Answer

What is F1 failure code on a kenmoore oasis washer


check your owner manual section troubleshooting for error code very important.
Normally this error code can be meansL a) pressure out of range.
or b)eepron error.
or call the factory and get support online via chat or phone for to fix it.
God bless you

Sep 25, 2012 | Kenmore 4.7 cu. ft. High-Efficiency Top...

1 Answer

The dishes are not clean when we run the wash cycle. It looks like the water flow from the top sprayer is NOT working. The door, when we open it, has undesolved soap stuck in globs on the top of the door....


Hi, I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works like new... However I have also found that if theheating element goes bad then that also can mess things up bad... So I wouldbuy new spray arms, and also check out the heating element to make sure it isworking...
Even if you need a heating element and spray arms, they will be much cheaper then a new one...espec. if you install it all yourself, which is not that hard to do...

Here is a tip that will help you with the online buying...
Dishwasher Spray Arms notSpinning

How to Buy ApplianceParts Online

A bad heating element causes many problems in dishwashers...

Dishwasher Problems The HeatingElement not Working

DishwasherMaintenance DishwasherResidue and Film on Dishes

heatman101

Asker's Testimonial "explanation very clear. will give it a go and see howsimple it was. thanks Ronnie " - ronnieshomes

May 16, 2011 | LG 24 in. LDS 5811 Built-in Dishwasher

1 Answer

Drain pump for Kenmore Elite top loading washing mechine


This will not be in the owner's manual.
If you search inside the cavity of your washer, however, you will find the service manual taped to the wall in a plastic bag.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Aug 07, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

I have a Kenmore Elite top loader that does not agitate after its filled with water and the lid is shut. I've tried all speeds.


I had the same problem with my Kenmoore and had to replace the agitator...ordered the part through Sears. Wasn't hard to fix, just needed to wait for the shipment.

Feb 28, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmoore wont spin front end loader


won't spin on the spin cycle it just has a grinding sound

Sep 10, 2008 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Kenmore 24 in. 15193 Stainless Steel Built-in Dishwasher Logo

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

Fred Sops

Level 2 Expert

272 Answers

D. E. Hev

Level 3 Expert

1168 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...