Question about Hayward 250kbtu Ng Pool Heater - Inground

1 Answer

I have a haywrd h250 pool heater displaying CE

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 857 Answers

CE means communication error. If communication between the ignition board and the display board is not established within 3 s of power-up an error will be displayed. After communication is established, if it is lost for 30 s, the error will be displayed. The error code will be cleared upon a valid data exchange between boards.

Posted on May 30, 2010

  • william876 May 30, 2010

    so what do I do?

  • Jayant Jha May 30, 2010

    1. Check for faulty wiring or connection.


    Inspect Display Interface Wiring. Ensure Display Interface Plug is
    to Control Module. If OK, proceed to step 2.


    2. Control Module and/or Display


    Interface Assembly are defective. Replace Control Module and/or Display Interface Assembly.


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hayward H250 pool heater will not light


see if pressure switch full voltage both sides or hi limits

Apr 26, 2013 | Hayward Pool Products Hayward H250 250k...

1 Answer

Hayward H250 has LO listed on the electronic panel after it had been blowing black soot out of it


check gas pressure heater overheated probably needs hi limits or fusible link plus clean heat exchange to solve

Oct 12, 2012 | Hayward H-series Electronic Gas Pool...

1 Answer

Hayward h250 ed2 failure error code IF


ignition failure check gas source if ok check ignitor

Aug 03, 2012 | Hayward H-series Electronic Gas Pool...

1 Answer

Pf hayward error code on gas heater H250 IDPL1


check pressure switch if voltage both sides ok if not bad switch or clogged copper tube also check filters

Nov 16, 2011 | Hayward H-series Electronic Gas Pool...

1 Answer

CE error code on hayward pool heater


CE= Communication Error between Control Module
and Display Interface Assembly
1. Disconnect and then reconnect power to heater.
2. Check for faulty wiring or connection.
Inspect Display Interface Wiring. Ensure Display Interface Plug is securely attached to Control Module. .
3. Control Module and/or Display Interface Assembly
are defective.Replace Control Module and/or Display Interface Assembly.
Here is a linkt oH aywardmanuals:
http://www.haywardnet.com/inground/products/manuals.cfm

Jul 04, 2010 | Hayward 250kbtu Ng Pool Heater - Inground

1 Answer

I have a H250 heater that is showing CE, communication error, what do you check first after you have shut it off at the breaker for a few minutes as suggested by owners manual?


If you have a remote controler you should check to be sure all connections to and at thr controler are sound then check all other connections on the heater itself. Check all the wireing and examine your board for any burnt spots or cracks. Some codes you get (this being one) will be kind of catch all's. Although a good place to start is the connections, this could be anywhere in the electric system. Good luck.

Dec 24, 2009 | Hayward 250kbtu Ng Pool Heater - Inground

1 Answer

Hayward h250, wont heat


Sounds like it could be the flame sensor.

Apr 04, 2009 | Hayward H Series Electronic Ignition...

Not finding what you are looking for?
Hayward 250kbtu Ng Pool Heater - Inground Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hayward Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1383 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Are you a Hayward Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...