Question about Audio & Video Receivers

1 Answer

Set clock curtis imode ip220 how to set clock

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Turn the power off. Press mem/clk set until time flashes. Press play/pause to adjust hours. Press mem/clk set, will switch to minutes. Press play/pause to adjust minutes. Press mem/clk set, will flash 3 times and then go solid.

Posted on Mar 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Aiwa XR-EM50


This was easy.. download the manual here:
http://www.nodevice.com/download/user_manual/aiwa+xr-em50.html
From the manual:

Clock Adjustment: (Page 7)

Setting the clock
1 Hold down SHIFT and press CLOCK on the remote
control.
When the unit is turned off, you can also press SET.
2 Within 6 seconds, press "< <" (rewind icon) or > > (fast forward icon) to set thetime.
Each press changes the time in 1-minute steps.
Holding these buttons down will vary the time in 10-minute
units.
3 Press SET.
The time display stops flashing and the clock starts from
00 seconds.

When setting the clock on the unit in stop mode, hold down
"square" (stop icon) and press "> >" in step 1. After setting the time in step 2,
press TONE in step 3.

To display the time while the power is on
Hold down SHIFT and press CLOCK on the remote control.
The time will be displayed for 6 seconds.

To switch to the 24-hour standard
Display the time and press s within 6 seconds.
With each press, the clock alternates between 12- and 24-
hour standard time.

Tip:
In the 12-hour standard, "AM12:00" indicates midnight and
"PM12:00" noon.
If the clock display flashes when the unit is turned
off
There has been a power interruption. Reset the clock.


Bass / Treb Adjustment: (Page 11)

1) Press BAS or TRE
2) Within 6 seconds, turn VOLUME (press VOLUME +,- on the remote control).
Each level can be adjusted from "-2" to "+5".

Good Luck!

Apr 07, 2014 | Audio & Video Receivers

1 Answer

Set the clock on the DEH 6900 ub


Setting the clock

Use these instructions to set the clock.

1 Use MULTI-CONTROL to select Clock.

2 Push MULTI-CONTROL left or right to

select the segment of the clock display you

wish to set.

Pushing MULTI-CONTROL left or right will select

one segment of the clock display:

Hour-Minute

As you select segments of the clock display

the segment selected will blink.

3 Push MULTI-CONTROL up or down to
put a clock right.

Manual on the link below.

http://a248.e.akamai.net/pix.crutchfield.com/Manuals/130/130DEHP690.PDF

Aug 07, 2011 | Pioneer Audio & Video Receivers

1 Answer

We would like to know how to set the clock on a RCA RS1286 radio/player. We did not get instructionws with it. Thanks Claude


Setting the Time
1. Press and hold CLOCK until the hour flashes on
the display.
2. Press PRESET UP or DOWN to set the hour and
then press CLOCK to shift to minute digits.
3. Press PRESET UP or DOWN to set the minute.
4. Press SET to save settings.
Press STOP at anytime in clock setting mode to quit
setting.
Note: When system is ON, you can press CLOCK to
display the current time for about

Hope this helped...:)

Any other questions regarding the stereo, let me know.

Nov 21, 2008 | RCA Audio & Video Receivers

1 Answer

How to set a deh-p4000ub car radios clock


try this:
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal performance
from this unit.
1 Press SOURCE and hold until the unit
turns off.
2 Press SOURCE and hold until function
name appears in the display.
3 Press FUNCTION to select one of the initial
settings.
Press FUNCTION repeatedly to switch between
the following settings:
Clock—AUX (auxiliary input)
Use the following instructions to operate each
particular setting.
# To cancel initial settings, press BAND.
# You can also cancel initial settings by holding
down SOURCE until the unit turns off.
Setting the clock
Use these instructions to set the clock.
1 Press FUNCTION to select clock.
2 Press c or d to select the segment of
the clock display you wish to set.
Pressing c or d will select one segment of the
clock display:
Hour—Minute
3 Press a or b to set the clock.
Turning the clock display on or off
You can turn the clock display on or off.
! Even when the sources are off, the clock
display appears on the display.
% Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.

Aug 05, 2008 | Pioneer Audio & Video Receivers

1 Answer

I can't set the clock on a DEH0-2050MPG car radio. When I press function as the manual says to, only 2 options appear, and neither have anything to do with the clock. What do I do?


If the function button does not work to set the clock, you have to turn the radio off, and hold down the source button until the clock appears. When the Clock appears, you can set it by using the four smaller buttons around the source button.

Jul 22, 2008 | Pioneer Audio & Video Receivers

1 Answer

How do you set the clock on the panasonic cq-c1121u cd radio.


1 Turn the ignition switch until
the accessory indicator
lights.
2 Press [SRC] (PWR: Power).
3 Press [DISP] (CLOCK).
4 Hold down [DISP] (CLOCK) for more than
2 seconds.
5 Adjust the hour.
[[]: sets the hour ahead.
[]]: sets the hour back.
6 Press [DISP] (CLOCK).
7 Adjust the minute.
[[]: sets the minute ahead.
[]]: sets the minute back.
8 Press [DISP] (CLOCK).
Notes:
¡ "AdJ" is displayed before adjusting the clock.
¡ Hold down []] or [[] to change numbers rapidly.

power off displayPower Off
Press [DISP] (Display) to change the display.

Mar 10, 2008 | Audio & Video Receivers

3 Answers

Setting clock on Pioneer MOSFET 50


To set the clock on the Pioneer Moseft leave ignition on accessories, turn radio off make sure clock is blacked out. Hold the volume-on -off for a few seconds and the clock should start flashing then use your arrow keys to set the clock.

Jan 13, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...