Question about Traxxas Rc Revo Nitro Monster Truck

1 Answer

Traxxas revo 3.3 running problems

My traxxas revo 3.3 will start but i rev it and then when i slow down it just cuts out and if it manges to stay on when im going as soon as i accelerate it just cuts out can anyone help

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 56 Answers

Maybe running to lean or to rich. When you accelerate put youre hand where the exhaust is and you should get a light spraying of unburnt fuel over hands(lovely!). If you do you may be able to screw in high end needle in a bit and i mean just a bit. If you hear the engine note raise a bit with a slightly higher pitch then you are running to lean and you will want to unscrew the high end needle valve asap.
Also check youre idle screw and make sure thats not closing the carb and stopping any airflow into engine. Let me know how it goes.

Posted on May 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Traxxas revo 2.5r


the engine shutt down just if load and not bobtail

Dec 29, 2013 | Traxxas Rc Revo Nitro Monster Truck

1 Answer

Cant get my traxxas revo rc car to stay running, need to know how to adjust the idel speed and the high and low speed needle


hi speed needle is the big one right below where fuel line goes in carb...the lo needle is on the end of the carb. slide..when you pull trigger theslide comes out...on the end of it is a screw thats the lo needle..the idle is on the carb. neck sorta on the back side.

Sep 17, 2013 | Traxxas Rc Revo Nitro Monster Truck

1 Answer

My traxxas revo 3.3 wont start again


Your clutch is wet. You need to drill a very small hole less than one eighth of an inch at the bottom of the EZ start. A thumbs up would be greatly appreciated if answer is helpful for your question. THANK you and GOD BLESS

Jun 05, 2012 | Traxxas Rc Revo Nitro Monster Truck

1 Answer

My traxxas revo 3.3's gears are grinding, the car has slowed down


sounds like engine is running to lean. count how many times the high end needle is out. will have to retune engine before piston seizes completly up.

Jul 20, 2010 | Traxxas Rc Revo Nitro Monster Truck

2 Answers

Start truck and it runs backwards!!


check your remote, the three switches on the bottom.. they control the servo's. one controls the forward and backward servo. test em out. one is bound to turn the servo around.

Apr 05, 2010 | Traxxas Rc Revo Nitro Monster Truck

1 Answer

I have a revo 3.3 nitro and im having problems starting it im am indoors about 70 and im flooding the engine i go through the steps for a flooded engine but the easy start won't turn i let it cool...


i'm new to revos two but i just bought a couple and had the same problem with one of them, make sure your glow plug is ok or just replace it and adjust your high speed needle, i'm in oregon i had to richen mine about 1/4 turn. i also noticed both of the models i got were set differently from the factory. there's info on traxxas website on where the factory needle settings should be.

Feb 02, 2010 | Traxxas Rc Revo Nitro Monster Truck

2 Answers

Traxxas Revo 3.3 shifting problem


you might need to reset the opti drive. turn the power on with the engine still off and hold down the optidrive button for 5 sec. see it that works.

Jun 24, 2009 | Traxxas Rc Revo Nitro Monster Truck

1 Answer

Troble with clutch


Its probably the spur gear. I had that happen a lot of times :)

Apr 19, 2009 | Traxxas Rc Revo Nitro Monster Truck

Not finding what you are looking for?
Traxxas Rc Revo Nitro Monster Truck Logo

1,034 people viewed this question

Ask a Question

Usually answered in minutes!

Top Traxxas Toys Experts

Michael Brisco

Level 1 Expert

4 Answers

cwradio73

Level 3 Expert

1162 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Traxxas Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...