Question about Sylvania 6842PE 42 in. HD-Ready Plasma Television

2 Answers

How do i find the code numbers to program my att uverse remote control

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,632 Answers

*To Manually program the AT&T universal remote control to your
TV here are the steps

Factory Reset the AT&T Remote Control:
* Press the ATT button and the OK button at the same time for 2-3 sec. release them at the same time. The ATT button will blink twice then enter the code 922. The ATT button will blink Thrice. IF not repeat the step
* Press the ATT button then check all the function of the remote (Volume, Channel, Menu, Guide)
Note: you will see that the max volume is 25. Dont worry its the volume of the receiver
To Program Your TV:
* Press the TV button and the OK button at the same time for 2-3 sec. release them at the same time. The TV button will blink twice then enter the code. Click Here to see the manucafturers list of codes. After Entering the code TV button will blink thrice. IF not repeat the step
Note: After you program the tv make sure to press the ATT button. then now check all the function of the remote. Follow the instruction and it will work. If you press the power button the TV and ATT Recievier will turn on and off at the same time

Thanks for using Fixya.

Posted on Jul 26, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 217 Answers

Hi! i have a couple of codes here for your sylvania tv you could try them 0062 0004 0009 0135 0189 0183 0227 0456 0008 0068 0075 0141 0161 hope it would help! goodluck!

Posted on Jun 03, 2010

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Not able to program vizio remote towork with att uverse Cisco box

Hi,
Maybe too late for you but ATT just gave me a code that works with my Vizio plasma. Code is 1343. Even the mute works correctly. They gave me some others to try but I didn't need them. Other codes were 1018, 0030 and 0056.

Posted on Aug 28, 2009

  • 1 Answer

SOURCE: Need remote control code for ATT U-verse

I HAD THE SAME PROBLEM WITH A VIZIO VL260M. THE CODE 1343 WORKED FOR ME ALSO.

Posted on Nov 09, 2009

  • 5 Answers

SOURCE: sylvania ld320ssx remote code for att uverse

Try 1864. It worked for a Media-Com remote, when none of the other codes worked.

Posted on Nov 30, 2009

SOURCE: need remote code for emerson LC195emx LCD TV

hi! i have here a couple of codes for your emerson tv. you could try them 0004 0009 0044 0135 0049 0051 0189 0053 0147 0039 0130 0227 0233 0250 0252 0254 0257 0265 0266 0310 0325 0456 0040 0041 0042 0021 0023 0024 0179 0045 0025 0027 0030 0032 0034 0035 0037 hope it would work! goodluck!

Posted on Jun 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program an AT&T u-verse remote to an ONKYO RC-866M remote


The RC-866M is the remote. What you need to do is add the codes for your Onkyo receiver into the ATT remote. There are 4 or 5 different Uverse remotes, but most can be reprogrammed by pressing the 'Menu' and 'OK' button together. First add your Onkyo codes to the ATT remote as an 'aux' device. After that is working, you can control the power and volume by adding the 'aux' device (Onkyo) to the power and volume buttons on the uverse remote.

These are all the different Onkyo Receiver codes:
Onkyo: 5002, 5018, 5073, 5074, 5075, 5076, 5077, 5078, 5079, 5080, 5081, 5082, 5084, 5085, 5086, 5087, 5130, 5131, 5140

This is how to reprogram the S10 style of Uverse remote:

http://www.att.com/support_media/images/pdf/uverse/standard_black_remote_control_uverse.pdf

Dec 22, 2014 | Onkyo Audio Players & Recorders

1 Answer

PROGRAM MY UVERSE REMOTE TO TCL TV


0174,0179,0173,1070. Try these codes. If you wish to get more, try the following links. Both the sites linked have set-up code list & set-up procedure to many popular brand remote controls.
http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/

Jan 21, 2014 | Televison & Video

1 Answer

Can a cox dvr remote be progranned to operate my ATT Uverse box? Lost my Uverse remote and dont wanna spend $ on new remote if poss


If you wish to get more details, check the links given below. Setup code list and setup proceedings to many popular brand remote controls are given. Pull up older posts there. You can also make a search by type in the brand name of your device into the search box; can be located at the top right of the display window. More than Nine and half Lakh viewers cannot be wrong.
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

May 12, 2013 | Televison & Video

2 Answers

Need a code for att uverse for the remote for vizio lcd


Click Here for the list of Manufacturer's Code for AT&T Uverse

May 13, 2010 | Zenith ZEN700 Remote Control

1 Answer

Need att remote control mfg. no. for magnavox tv


i do not think it would work with your tv. there has been problems when tech installed uverse on dozens of tv. you can try to purchase an universal remote and see if that works. it is just like a jvc vcr/dvd player/recorder which will not work with any tv but jvc. you can also call att tech to help

Mar 05, 2010 | Televison & Video

1 Answer

Att uverse remote won't work with other devices


Yes you have to use the recommended Uverse codes, and follow the directions to enter the code. Hold the tv button down, on the Uverse remote, then with it stil held down add the OK button, let go of both, then you will see the lights at the top of Uverse remote light up, it is then ready to accept the code, it will be a four digit code, Go to helpme@att.net, and look under TV, then programming the remote is there. Put remote Code in the att search box if you can't find it.

Apr 04, 2009 | Televison & Video

4 Answers

Not able to program vizio remote towork with att uverse Cisco box


Hi,
Maybe too late for you but ATT just gave me a code that works with my Vizio plasma. Code is 1343. Even the mute works correctly. They gave me some others to try but I didn't need them. Other codes were 1018, 0030 and 0056.

Mar 19, 2009 | Vizio VO47L 47 in. LCD TV

4 Answers

Att uverse remote won't turn on yamaha reciever


Do an automatic search for your code.
  1. Turn on the device you wish to program
  2. Point the remote control at the device
  3. Press and hold the mode key (i.e. tv, dvd or aux) you want to program
  4. Without releasing the selected mode key, press and hold the OK key simultaneously
  5. Release both the mode key and the OK key -All the modes keys will flash twice indicating programming mode
  6. Enter 922 by pressing the number keys on the remote control -The selected mode key will flash twice indicating correct entry (for anything other than AUX go to step 7, for the AUX mode searching only, press and release the play key then press 1 for VCR 2 for Receiver/Tuner 3 for Amplifier or 4 for Home Theater In The Box (HTIB) - The AUX mode keys will flash twice indicating correct entry)
  7. Press and release the PLAY key, every time you do this, autoserach will try a different code, continue to do this until your device turns off. (if you weren't paying attention and you miss it, the REW key can be used to go back through the codes one at a time, and the ff key can be utilized to move forward through the codes one at a time.)
  8. To save the code press the ENTER key (below the number 9) then press the exit to return to normal operations. (the selected mode key should flash three times
  9. Turn you device on by selecting the appropriate mode and power.

Jan 19, 2009 | Yamaha HTR-5940 Receiver

1 Answer

My att remote control for my uverse did not come with a manuel


Here is the manual for the remote and the codes are there also.

http://helpme.att.net/pdf/uverse/remote_control_user_guide.pdf

Good luck and Please rate FixYa!

Dec 28, 2008 | Televison & Video

Not finding what you are looking for?
Sylvania 6842PE 42 in. HD-Ready Plasma Television Logo

666 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...