Question about Computers & Internet

1 Answer

Problem with truncated image from data projector

I am trying to choose a data projector to go with my newly acquired DELL Vospro 1700 laptop. I had the opportunity to try out an old Mitsubishi model SD 205 borrowed from a friend. One of the things I found was that I couldn't make the image from the projector match the image on the laptop's monitor. Both left and right hand side were cut off. None of the settings on the projector seemed to make any difference.

Posted by on

  • alanharr Apr 11, 2008

    I hadn't thought of trying to use the computer to do this. I will try it out. Thanks for the help.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 472 Answers

You will need to setup the displays from the computer running the projector.

Setup the projector as being a second monitor pretty much and make the adjustments from that in display properties on your computer, or your video card may have it's own control panel for this as well.

Hope it helps =)

Posted on Apr 08, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have gigaware pico projector. When I connect to new Dell Inspiron laptop, Windows 7, screen goes black. Pico suggested resolution of 800 x 600, & 60 Hz for frequency?. Changed resolution prior to


You can choose either.
If you select duplicate, it is useful when you have to give a speech or lecture and you are facing the audience because the projected image is behind you and you can also see the image on the laptop when you face the audience.
The display frequency can be changes in Control Panel - Display

Mar 02, 2013 | Computers & Internet

1 Answer

I have dell latitude E6400, I am unable to toggle between external display(projector/monitor) and laptop display. As in laptop manual, i have tried using function keys (fn+f8).


@praskumar79

Things to check:

1. Is your display automatically transfer to the projetor right away when you plug the VGA/HDMI cable to the computer? If not, and Fn+F8 doesn't do anything, try to press the Windows Key+P (the windows key looks like this ray_tosh_1.jpg ). This will allow you to switch between displays. (see image below).

ray_tosh_10.png

2. If you choose one of the display mode above and it still won't clone/extend the image on your computer to the projector, try to use a different cable. If still no go, try to re-install the display driver and see if that fixes it. If same issue, there might be a problem with your VGA/HDMI/Display port and needs to be serviced.

Good luck

Sep 12, 2011 | Dell Latitude E6400 Notebook

2 Answers

I have dell 15-1555 laptop,i want to recovery to factory image.but i can't get to advanced boot menu by pressing F8 when power on. how can i do? note: i re-partitioned before.


When you partitioned it, did you delete the recovery partition? If so you'll have to acquire 3rd party software to recover the data or do a new install with a disc.

Sep 08, 2011 | Dell Studio 15 Laptop

1 Answer

I have to insert an Image to the database... write the code for that ... bt when it goes to executenonquery line 1 exception is coming that binary data would be truncated ..... i dont know what is the...


Sounds like the data is too large for the medium it will be stored on. I could be wrong, but it sounds like it just wont fit in the space allowed. Maybe try a compression algorithm?

Jun 29, 2010 | Dell Dimension 5150 (DIM515MIN) PC Desktop

1 Answer

TravelMate 3270-6569 (LX.TH706.051) PC Notebook: My acer travelmate 3270 is connected to a sony dat...


Try holding down the Function key (Fn), then pressing F5. Wait a few seconds. On most laptop, each press of the F5 key will toggle between laptop display only, projector only and Dual (same image on both - my favorite).

You'll probably see a little Monitor-shaped icon on the F5 key. It's possible it's another function key - on Dells it's usually F8.

Aug 02, 2017 | Acer TravelMate 3270-6569 Notebook

1 Answer

Dell Vostro 1510 connects to Sony Data Projector SVGA VPL-C57 shows colour of screen but not content. Can view data when starting up laptop but then shows a blank when I go into presentation. Is there a...


Do you have an SV plug in on both your laptop and projector?..the laptop video out(SV) and the projector video in(SV),if so...try an SV wire connector:)

Apr 13, 2010 | Dell Vostro 1510 Laptop

1 Answer

PROJECTOR IS TRUNCATING THE IMAGE OF LAPTOP


Hi Shamimph,
You can try to lower the resolution of the display setting of the laptop
let say 800x600 or 1027x768
try it
cheers


Jan 11, 2010 | HP Computers & Internet

1 Answer

Laptop screen image is truncated on data projector display (Dell)


Had the same problem, tried a Factory Reset from the menu and it seems to have worked. Don't know what caused in in the first place

Nov 11, 2009 | Dell Office Equipment & Supplies

1 Answer

Dell 3300MP


one thing to try is the color mode button on the remote

Feb 28, 2008 | Dell 3300MP Multimedia Projector

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

479 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...