Question about Kenmore Elite HE4 Electric Dryer

2 Answers

Kenmore Elite Smartheat Quiet Pak 9 won't start. Light turns on and off inside drum when door opens/closes, but no lights come on on the outside display.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Kenmore Elite dryer keeps beeping..just going through the end of cycle alarm-high,low,off...anyone have any suggestions?

Posted on Apr 06, 2011

  • ggwarnold Jun 12, 2011

    This was posted as a solution when it should have been a question. Did anyone find a solution to this problem? We are having the same problem.

  • infinitigirl Jul 05, 2011

    I have no solution, I'm having he same problem! Anyone Please Help!

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Kenmore Elite Smartheat Quiet Pak 9 dyer, door will open while running

Posted on Dec 24, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The drum won't turn in my kenmore elite smartheat electric quiet pak 4 dryer


CHECK DOOR SWITCH, CHECK FOR BROKEN BELT? CAN U OPEN IT WHILE ITS ON AND TURN BY HAND AND SEE IF IT STARTS? REMEBER TO PUSH IN DOOR SWITCH BUTTON WHEN TURNING IT

Feb 12, 2015 | Kenmore Dryers

1 Answer

Kenmore elite smartheat quiet pak 9 will not start or power on


Electric dryer no start does nothing

Check dryer Terminal block prongs both outside prongs should give combined 220, and 110 each if u check 1 outside & 1 center (ground) prong. Also check house electrical outlet for full voltage.

CHECK THERMAL SHUT OFF THERMOSTAT USUALLY LOCATED ON THE BLOWER. for OHMS or resistance with a meter. Should show a closed circuit. Ohms WHEN THIS FUSE BLOWS IT WILL SHUT DOWN EVERYTHING.

NEXT Test the PUSH start switch with meter for OHMS. Should show OHMS when pushed in or on start, and no ohms or infinity when in off position.

If you hear a humming/clicking sound from motor area you more than likely have a bad motor.
Try this test out to see if u have weak windings or relay/capacitor on motor.
Open the dryer door and turn by hand the drum while machine is on ON position. And you or someone else presses the door engagement switch in. If it starts up then u have bad windings

Another thing to check is the belt safety switch. With a multi meter.
Especially if u just replaced the belt. The belt safety switch is attached to the Tensioner and motor. IT LOOKS LIKE A DOOR SWITCH SOMEWHAT a little black pc of plastic with 2 prongs going into it. Sits at bottom of motor. Under the Tensioner. Attach meter clips to the 2 prongs on switch, Then when the little white push button is pressed in it should show continuity and none when released.

Lastly check ut push start button for continuity with a meter when pushed in the on position, it may have gone bad.


https://www.youtube.com/watch?v=sTRP6kHqAFs

Jun 21, 2014 | Kenmore Elite HE4 Electric Dryer

1 Answer

The kenmore elite smart wash quiet pak 9 I opened the door and threw something else in and now a light is on thar says controls locked and it wont do anything


There should be a button on the control panel that says "open door" you need to push that button and wait for the washer to shut off before you open the door. Try pushing that button to see if that resets. My guess is that you broke the safety latch when you opened the door and it will need repair.

Mar 10, 2014 | Kenmore Washing Machines

1 Answer

Kenmore elite quiet pak 9 he4t flow


possible faulty door switch. I suggest your first step is to jumper door switch and try systems again.

Aug 21, 2013 | Washing Machines

1 Answer

I have a Kenmore Elite HE4 smartheat quiet pak 9 that has power but will not start.


Sounds like the belt that turns the drum could be broken. I'd check that first.

Oct 12, 2017 | Kenmore Elite HE4 Electric Dryer

1 Answer

My Kenmore Elite Smartheat Quietpak 4 will not start. F70 code


leave door open and press the rubber botton inside, \ I just hooked up mine and it did same thing, i pushed botton light went out, so this told me the door wasnt closing correctly, you have to push hard on door first couple times. hope this helps you.
dave

Feb 09, 2010 | Kenmore Elite HE4 Electric Dryer

2 Answers

Kenmore smart heat quiet pak 9, just beeps won't start


m dryer did the same thing tonight and it was the door switch luckly i wiggled it and it came back on

Feb 22, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore elite quiet pac 9


unplug dryer, then take the top off and check your connections to door switch.i believe this model has a broke belt switch.open the bottom with the machine unplugged and reach inside and see if the belt is broke.if it is then replace the belt.

Nov 03, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Kenmore Elite HE4 Electric Dryer Logo

2,768 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal De

Level 3 Expert

2696 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...