Question about Samsung Televison & Video

1 Answer

Hi la40a650a1fxxy turned off with remote last night and can no longer turn on either with remote or on the side panel.red light is flasing on and off.so is receiving power.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. Blinking red light means that the power is getting to the unit however, as its not working which means that the power board should be checked. To start with open the back of the unit and then check the power supply board for any bad (bulged/swollen) capacitors. Power supply board is the board where all the power cords/plugs goes into. After you have checked that also check the main board and if you can use a multimeter to test the components on these boards. All this should only be done if you have knowledge of internal circuitry of the unit as the components consists high voltages even when in off position. Please do accept the solution if the issue is resolved or post a comment for further assistance.



Thanks
Rylee

Posted on May 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My TV is not turning on. It was working last night when I turned it off. The red light is on and the cable clicker's lights turn on so not batteries. I pushed the on button on the top and still not


Hi Katherin,

Place your remote towards the camera. (The IR emitter -small light bulb sort of thing should be placed frontwards.) press any button and look through the camera, you should see a white light when you press the button.)



This is the only way to check Infra red light because our naked eye is not sensitive to check it. (use your phone\'s camera)



if the light is not working. check the remote. Maybe wrong installation of batteries or they are dead OR need a new remote.



if the light is working,need more attention then. (sorry can\'t call you i\'m a sri lankan. Can viber you although. ) if the problem presists let me know i\'ll viber you :)

Oct 11, 2014 | Televison & Video

1 Answer

I plug my tv in the light stays green it turns red sometimes it turned on last night the light was red when it was off turns green when its on I plugged it in now won't turn on but the light is green


It sounds to be a panel fault. Contact any service technician, and make it sure. If you wish to get some screen-shots about faulty displays http://electronicshelponline.blogspot.com/ check this link. Pull up previous posts there, either by its left side bar, or view it in Timslide option.

Jul 01, 2013 | Televison & Video

1 Answer

Luxor tv will not power up and red light just keep flashing


I just pull out the mains plug for a few seconds then put it back in. The red light keeps flasing for a while (be patient) then stays solid red. When I then switch on again with the remote it is fine. I often have to do this.

Jul 27, 2012 | Televison & Video

1 Answer

My LG LCD 32LD350 seemed to have been fried in a storm last night, stanby red light no longer lit and won't turn on, still see some green lighting inside televison, but it won't turn on, Is it


Is it repairable, well, this question can be answered only after opening the back cover and evaluating the damage. From you side, please connect the TV to a different power outlet where other similar devices are working and see. Then try changing the input device to something that sure works. If it does not work even then, this may need attention by a qualified service technician.

Jul 27, 2012 | LG 32LD350 32 in. LCD TV

1 Answer

No power. Died when turning on to watch TV.


unplug for a couple of minutes then plug back in and try

Oct 29, 2009 | Niko SV3206 32 in. LCD Television

3 Answers

Hi, i have 2 televisions different makes both turn on to standby but wont turn on fully, the bush tv when i push programme button to turn on the red standby button flashes but nothing else.


I have the same problem, my Bush LCD worked fine last night but won't turn on today. The main power button on the TV puts it onto standby but the remote or the buttons on the side won't turn it on!....HELP!

Sep 06, 2009 | Televison & Video

1 Answer

Flashing red light


Same problem with my Sony. Unplugging for 36 hours solved the problem

Oct 05, 2008 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

2 Answers

Blinking power light.


i hve the same problem. I turned on my Sharp Aquos lc-32d62u HDTV last night for the first time, but it is black and a blinking green light.
did you find a solution?

Mar 06, 2008 | Sharp Aquos LC-32G4U 32 in. HD-Ready LCD...

Not finding what you are looking for?

Open Questions:

Televison & Video Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...