Question about Golden Technologies Alante' Power Chair

1 Answer

Change batteries . light show up on control and go out when toogle switch moved chair will not move or make a sound

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 177 Answers

Hi. Sounds like a loose battery terminal or a faulty in-line battery connector, or a loose terminal on the controller.
Could also be caused by a faulty set of batteries that can't supply enough current ( amps ) to drive the machine.
Could be a siezed brake solenoid stopping the motor from turning. A burnt out motor will also cause this problem. A burnt out motor will have a strong smell of burnt varnish.
What is the history of this machine, has it been sitting unused for a while> Have you had any other problems?
Good luck. Neil.

Posted on Jun 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hoveround won't move.


Double check to be sure drive levers are fully engaged. Go down and up a few times. If problem persists have Hoveround come and check it out. One of the drive motors may have shorted out when you continued driving with gravel in the wheel.

Mar 29, 2015 | Hoveround MPV5 Electric Wheelchair - Used...

1 Answer

Shoprider power chair won't move and 8 Battery LED Lights are flashing


Code 8: Controller problem. Also, check to see if your gearbox levers are engaged - if you can roll the chair by hand the gearbox is not engaging the motors.

Mar 20, 2013 | Pride Mobility Products New Pride Mobility...

1 Answer

Jazzy 1113 power chair shows charged but control light is blicking. Chair will not move.


It appears that the controls are in Lock Mode. Unlocking Instructions depend on your type of controller. Go to PrideMobility.com to download the proper manuals for chair and controller.

Feb 11, 2013 | Pride Jazzy 1113 Power Chair

1 Answer

Jet 3 will not turn on but when you plug charger cord in it will light up the entire length of the battery indicator when you push the switch. Chair will still not move. Controller is a PG Drives Pilot...


the batteries are not charged and need to be replaced. The reason you have lights is because the charger is supplying power to the chair and the chair will not move when the charger is plugged in because of the inhibit function. Replace the batteries and make sure you charge before use Hope this helps

Apr 15, 2011 | Pride Used Mobility Jet 3 Power Wheel...

1 Answer

Wheel chair won't move. Batteries have been charging for several hours and have some charge but chair will not move.Any suggestions? Thanks


Romp, Did you check the freewheel levers chair will not move if you are in freewheel. Levers are in front next to seat posts and need to be facing forward. If you are not in freewheel then check the number of lights you have on on the joystick and that they aren't flashing. Also check that your speed control is not on the lowest setting even with some charge a slow speed setting will not let the chair move. Now by some charge you mean lights in the green on the joystick? If the lights aren't flashing then I'm kinda unsure other than even with some charge the batteries don't have enuf current to drive the motors and need to be replaced Hoe this helps

Aug 22, 2010 | Pride Mobility Products New Pride Mobility...

1 Answer

When turning power it makes a clicking sound but does not power up. battery charger has a red and green light on. When plugged in and turned on it flashes 8 times. I checked the power control connection,...


The chair will not move if the charger is plugged in. The flashes are normal with the charger plugged into the chair. The lights on the charger mean that the batteries have been fully charged. Red and yellow lights mean charging. After you unplug the charger from the chair (if off-baord charger, turn charger off or unplug from the wall) then unplug from joystick. after plug is removed from joystick press the on button and all the battery lights should be lit and when you move the joystick forward you will hear the electric bake release and the chair should move forward etc Hope this helps

Aug 10, 2010 | Pride Jazzy Select 6 Indoor Power...

1 Answer

I have a quantum 600 power chair. when I move the joystick in any direction the chair goes into drive like normal but doesn't want to move and moves very slowly even after i change the speed setting.


Sounds like you need new batteries. Assuming that the chair is programmed for a faster speed and has gone faster in the past the most likely culprit is old or discharged batteries. The charger or plug may be at fault also. Also check that the charger is plugged in and the indicator lights of the charger are on.

Aug 08, 2010 | Electric Health & Beauty

2 Answers

Chair will not go up or down


The clicking is the mechanical part of the switch, but the electrical part may still be bad. In all the chairs I have serviced, it has always been the switch. The switch itself goes for about $25 plus labor to change it, and the whole control unit retails for about $100. the best test is to take the controller apart and short out the center wire to either side and check the chair for movement.

Jan 22, 2009 | Pride Mobility Products Casual CL30KD Lift...

1 Answer

Led lights flash and Pride Go chair won't move.


Firstly disengage the drive levers and then "flick "them in fash.
Second pull out the large plug that is between them.
Check for damaged or bent or loose pins. press it home firmly .
I did this on my wifes chair and she zooms around.
All switched etc should be off during charge.

Lastly i fully discharged then recharged the battery to ensure no "battery charge memory".
To fully dicharge i shoved a small box between back wheels so to lift of ground and then a elastic band to hond controler on.

Jan 11, 2009 | Pride Go Chair Travel Power Chair

Not finding what you are looking for?
Golden Technologies Alante' Power Chair Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Golden Technologies Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

280 Answers

Colin Taylor

Level 2 Expert

346 Answers

Are you a Golden Technologies Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...