Question about Braun MULTIMAG SlideScan 4000

2 Answers

I am trying to install my Braun multimag slide scan 4000 on a new computer with windows 7. The program can't find an appropriate driver. Any suggestions

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 1 Answer

I had a used SlideScan 4000 that I tinkered with trying to get working for 2 years with several computers, drivers from the web & firmware updates. It would scan a few slides then freeze. It seemed to depend on the memory, as I could scan 2-3 slides on low resolution before freezing, but stopped half way through the first slide on high resolution. I finally found that I had to go into Device Manager (I'm on Windows 7 - Ultimate) and delete all other imaging devices (well I think I was able to leave the computer's web cam on) to enable the device driver to load properly. I installed Cyberview X - which installs the driver but I am using Vuescan for my slides. I recall my dad having a similar problem getting another scanner to work on his computer. Apparently it is a common problem to have conflicts with scanner drivers if you have more than one on your computer.

Posted on Jan 07, 2016

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

9950 driver download for Windows 7 please.


Download the program (freeware) to find driver at http://driveridentifier.com/.Instal that program and let it to scan your pc and finally find the appropriate driver.

Dec 12, 2013 | ATI RADEON 9550 Graphic Card

1 Answer

Where can I get Braun MULTIMAG SlideScan 4000 repaired?


this is from the Braun site in Nuernberg, Deutschland:


HP Marketing Corp.

Tel.: 001-973-80 89 010

P.O. Box 715

Fax: 001-973-80 89 004

Pine Brook, N.J.07058

Email: info@hpmarketingcorp.com


Feb 10, 2013 | Braun MULTIMAG SlideScan 4000

1 Answer

Braun Paximat Multimag 250 AF Hand operated slide change works but has resistance. When using the remote control the side can only be part viewed and needs assistance by hand operating. I believe there...


If you are in the USA send it to Braun service at:
HP Marketing Corp. PO Box 715 16 Chapin Rd. Unit 908 Pine Brook, NJ 07058 800-735-4373
Otherwise check the factory web site for Braun service in your area. www.braunphototechnik.com

May 31, 2011 | Braun Office Equipment & Supplies

1 Answer

Recently upgraded from Windows Vista to Windows 7. Where can I get correct drivers to run with my Nikon Super Coolscan slide scanner LS-4000 ED model. I have Nikon Scan 3.0 twain software. Stu Milligan


Hello there.
This will help you if you have 64-bit Windows 7, because officially, there is not windows 7 64 bit driver.
Just read and do everything.

http://www.earthboundlight.com/phototips/coolscan-vista-64.html
Otherwise, if you have windows 7 32bit click here:
link
To check bits, go right click on My Computer, Properties, and you will see it.
Sincerely,
Steve TM

May 28, 2011 | Nikon Super Coolscan 4000 ED Film Scanner...

1 Answer

Not compatible with new computer windows 7


Not compatible or not working well with windows 7?
(making a program work with windows 7)

Maybe, It doesn't work because the driver/application you installed is for other versions of operating system. I am also using windows 7 like you so don't you worry, You can still use your old installer/driver from other versions of operating systems. Just remember that before installing any program in a windows 7 Operating System Computer, Use "troubleshoot compatibility". Right Click the Icon of your program installer/application first, then choose "troubleshoot compatibility". This will allow you to choose on what type operating system your program will run. Just reply back if it still doesn't work.:D rate and vote for me:)) julyallan01_52.jpg

Jan 24, 2010 | Microsoft Wireless Laser Desktop 4000...

1 Answer

My Braun 3650 is scanning everything RED, I changed computers and is still scanning red, any idea why it's doing that?


See previous fix for black lines problem is likely the same i.e fractures in the flexible cable between the scanning head and mother board, changing this cable will likely cure this fault.

Oct 05, 2009 | Braun MULTIMAG SlideScan 4000

1 Answer

HP Scanner 3570C-can not scan my slides


According to the manual, you should always scan from the HP scanning software to scan slides using Scanjet transparent material adapter. There is no button that you can set for default slide scanning properties. This is shown on page 8 of the manual for the 3500 series scanners. The manual is available here: https://www.manualslib.com/manual/72847/Hp-Scanjet-2300c-Series.html?page=13#manual .

Since the scanner works with pictures, make sure that the TMA adapter is plugged into the back of the scanner. Next open the software, HP Photo & Imaging Director. In most versions of Windows, press Start and look for the HP programs heading. Expand this to find the executable file. Alternatively, find the icon on the desktop or find the software in the file explorer (Program Files/HP/ on 32-bit versions, Program Files (x86)/HP) and then the appropriate sub-folder. Now try to scan the slides when they are loading in the adapter.

I hope this helps. Please add a comment with your OS if you are still having problems. Some newer OS versions may have installed generic drivers for the ScanJet 3570C. The generic driver might not communicate with the TMA properly.)

Cindy Wells

Jul 12, 2017 | HP ScanJet 3570cv Flatbed Scanner

1 Answer

Mac can't find the driver for the Multimag 4000 - using cyberview


Hi
lets start with what mac system you have there? the device is supported on Mac: OS X 10.1.5 or higher

Dec 26, 2008 | Braun MULTIMAG SlideScan 4000

2 Answers

Random black lines on scanned slides


Normally dark lines are a speck of dirt sticking on to the glass and when scanned continuously, it appears as a line. Clean the glass thoroughly. Ensure the slides are dust free. If the lines are appearing in different locations, it means the dust gets removed while scanning. Line in the same place could be because of glass is scratched. The above is common with roller scanners.

For fat bed scanners, there will be no scratch on the glass. It must be from the slides/documents

Feb 20, 2008 | Braun MULTIMAG SlideScan 4000

Not finding what you are looking for?

Open Questions:

See all Braun MULTIMAG SlideScan 4000 Questions

Braun MULTIMAG SlideScan 4000 Logo

Related Topics:

521 people viewed this question

Ask a Question

Usually answered in minutes!

Top Braun Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

5060 Answers

Tom Chichester

Level 3 Expert

33342 Answers

john Benson
john Benson

Level 2 Expert

166 Answers

Are you a Braun Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...