Question about Staples SPL1050LBRX (CrossCut) Shredder
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I found a way to do a fix that should last for awhile. Put the large gear in a vise leaving room to partially knock the small broken gear through. I used a bolt the same size as the hole in the plastic, and tapped it in about 1/4 inch. This pushes some of the small gear through, exposing more of the usable part of it. I then cut (hacksawed) off about 3/8 inch of the broken part, put it back together and it works!..................Good luck, Sparky
Posted on Dec 15, 2008
if you look at the underside of the shredder, you will likely find a pressure switch that is actuated when it sits on the stock bin, either modify it to touch when on the new bin or secure it so it is depressed all the time. This should allow it to operate on the replacement bin.
Hope this is of some help.
Posted on Apr 20, 2009
Tips for a great answer:
Jun 27, 2017 | Staples Office Equipment & Supplies
Dec 14, 2014 | Staples Office Equipment & Supplies
May 17, 2011 | Staples SPL826X (CrossCut) Shredder
Jan 05, 2011 | Staples SPLP500 Scientific Calculator
Apr 20, 2009 | Office Equipment & Supplies
Apr 04, 2009 | Fellowes Office Equipment & Supplies
181 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: