Question about Hitachi 61SDX01B 61" Rear Projection Television

1 Answer

Need deflection board for Hitachi 50UX26B

I need to replace the deflection board Part # JK03161 in my Hitachi tv . Its a 1996 model 50UX26B and I can't find the part anywhere. Where can I find a used deflection board for this model tv.

Posted by on

  • lee444 Apr 08, 2008

    Both sites state that it is unavailable. When I called they said they don't carry the part anymore.
    Do you have any other ideas on how to locate this part. Or even any ideas on how to secure a used part for this television.
    lee444

  • lee444 Apr 15, 2008

    I already spoke with all of the folks that you recommended before you even suggested them.I called them again just to be sure that the info I got was correct. They stated that this part has not been available for the past 3 or 4 years and there is no way to order it. The only way to get the part is if someone has the same model tv and theirs isn't working and they are willing to sell the deflection board.
    Any other ideas (as the repair shops refuse to work on the board as it is cracked).
    Lee444

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 119 Answers

Please find the deflection board priced 28$ at the following link.

http://www.vancebaldwin.com/products/?JK03161

Many regards

EngineerGR

Posted on Apr 08, 2008

  • T.M.
    T.M. Apr 08, 2008

    Also an alternative source is the following. (Note: The item in this link does not appear to be in stock but an order could be made on demand.) The price is the same as the one above (28$)

    https://www.ued.net/ued/addItems.do?item...

    Many regards

    EngineerGR

  • T.M.
    T.M. Apr 09, 2008


    Dear Lee,

    I have just spent over an hour searching for the PWB and with this PART NO JK03161 I could not find it.

    What I know for sure is that this part is also used in the 50FX30B Hitachi Model.

    What I have noticed is that the part number is different than the ones HITACHI has categorised them (perhaps back in 1996 they had a different system, who really knows.)

    Anyway at the following store these people seem to have a lot about the 50UX models and the 50FX, perhaps they are willing to help. (I looked over all the parts but due to the fact that the part number looks different I cannot be sure)

    I think it is worth to ask them. They are more specialized and have in front of them a logistics system to help them pinpoint the board if available,

    http://www.partstore.com/ModelSearch.asp...




    NOTE: Many problems regarding the PWB can be fixed, perhaps by simply changing some IC's, a couple of resistors and so on, so perhaps you could ask me for help again if you cant find the board.

    Many regards,
    EngineerGR

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i manully converge 50" Hitachi projection


You have to get into whats called DCAM mode to manually converge the set if you don't see a menu option for convergence. Goto the site www.tvrepairkits.com - they have a DCAM article on their tips page.

Aug 26, 2011 | Hitachi 50UX26B/27K 50" Rear Projection...

8 Answers

Hitachi 50UX26B no picture no sound


The deflection board needs replaced.

Dec 05, 2007 | Televison & Video

1 Answer

I have a Hitachi 50ux26b TV. When you go to turn it on it makes a click noise and then nothing happens?


replace your STK ICS they are STK392-570s call Mats 1-800-628-1118 They will be BIG BLACK ICs

Dec 31, 2009 | Hitachi 50UX26B/27K 50" Rear Projection...

1 Answer

I have a Hitachi 50UX26B projection TVthat deosn't


Replace Both of your STK ICs they are big black ICs will have Part# on them STK392-570s Call Mats Electronics 1-800-628-1118 Also CKf903 and pico fusses they look like resistors but are yellow or Green 5amps and 6amps

Dec 31, 2009 | Hitachi 50UX26B/27K 50" Rear Projection...

1 Answer

Hitachi 50ux26B keeps turning off.


There is a chance that the one of the power relays are causing the problem. They have been known to be intermittent and even work for 5 sec. or 5 days before failing. When the back is off, turn the set on and when it shuts down lightly tap the relay/s in the power supply lightly and see if the set comes on for any length of time. If it does, replace the relay
and you will fix the problem. Let me know what you find.
Hope this helps,
Skyassoc

Jun 29, 2009 | Hitachi 50UX26B/27K 50" Rear Projection...

1 Answer

Hitachi 50ux26b


Good day, moparsask;

You had this problem before and had TV into a 'TV REPAIR' shop and the problem came back and you want to repair it yourself ??
There is no known common fix for the TV, so I would recommend that if you want color back on your TV that you have a factory authorized service dealer look at your TV and have them give an estimate and confess their warranty.

I hope this was helpful, big IRISH.

Jul 25, 2008 | Hitachi 50UX26B/27K 50" Rear Projection...

2 Answers

Hitachi 50UX26B


does the led on the front of the set light up? Is 50UX26B the right model number of your set?

Apr 27, 2008 | Hitachi 50UX26B/27K 50" Rear Projection...

1 Answer

Booming noise


10 years is about life for these, booming noise like a gun shoot?
i would suspect a cap blew up can you open the back and see any burn marks or paper ?

Nov 26, 2007 | Hitachi 50UX26B/27K 50" Rear Projection...

1 Answer

Hitachi Projection Color TV


KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Nov 10, 2007 | Hitachi 50UX26B/27K 50" Rear Projection...

1 Answer

50UX26B Convergence or Ghosting problem


new convergence pc board is worth $400-600 /repair the old because you probably won't find one and if you do the same thing will happen in time anyway,you know what you got and must ask your self .what will it cost to replace it at this time /shop around /compare prices and extended warranties////////////

Sep 08, 2007 | Hitachi 50UX57B 50" Rear Projection...

Not finding what you are looking for?
Hitachi 61SDX01B 61" Rear Projection Television Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69955 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...