I really need help with drivers for Sonnet tempo 133 i have some useful stuff on this raid please somebody help me on official site i have find NOTHING for this card

try the vista driver it should work ok

32 bit driver is here http://it.us.syba.com/bin/silicon_image/sil680/SD-ATA133I-VISTA-32bit.zip
64 bit driver is here http://it.us.syba.com/bin/silicon_image/sil680/SD-ATA133I-VISTA-64bit.zip

if you found this useful please vote for me

Hi,
you can find the official driver for the VIA 8237R chipset on the official VIA site (here http://www.via.com.tw/en/support/drivers.jsp ). But, it seems like the chipset you are referring to is used as a RAID controller, not as a integrated video chipset, so, if you are experiencing video issues, you should find what exactly is the model of your vga so that we can help you find the drivers you need.
Hope it helped,
Franz

hi I found this link below for all syba driver updates and downloads, hope this helps.


http://it.us.syba.com/support_download/download/index.html

You can download & install it by going to Windows Update.
Worked for me! Good luck!

Check the manufacturer's web-site:

http://www.sonnettech.com/support/kb/kb.php?cat=365

for the drivers.

you can download from web site of board if you can use the public libray system jim

No I do not think there is unfortunaely. Contact Maxtor and ask if they are going to support it under Windows 7?

You can plug it in and see if Vista can use any of its drivers for it. In many cases it has drivers for the chipset on the card which will work perfectly well with the device.

Sorry we do not have drivers here, try Microsoft website.

I needed to see your board & can at this site. http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=493&DetailName=Manual&MenuID=1&LanID=0

This is good for you as well. It shows me & you that your board can handel 4 each DMA/ATA-133 (Ultra) IDE Hard drives/ CD/DVD drives IDE-1Primary & IDE-2 Primary Slave. Each can run 2 IDE drives. Also 4 each Serial ATA SATA's. Two separate SATA controllers with integrated PHYs, each supporting two
drives in master mode. In your manual on pg.32 & 33 will help you to setup a RAID if you wish. Or you can also set the RAID to IDE which will allow you to use all your SATA hard disks as a single drive without setting up a RAID system. The site above supplies all your drivers needed & manual. If you need more help please let me know here.
Luck!
Please vote......